[PATCH v3 9/9] ata: ahci: Add debug print for external port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a debug print that tells us if LPM is not getting enabled because the
port is external.

Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Niklas Cassel <cassel@xxxxxxxxxx>
---
 drivers/ata/ahci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fc6fd583faf8..a05c17249448 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1732,8 +1732,10 @@ static void ahci_update_initial_lpm_policy(struct ata_port *ap)
 	 * Management Interaction in AHCI 1.3.1. Therefore, do not enable
 	 * LPM if the port advertises itself as an external port.
 	 */
-	if (ap->pflags & ATA_PFLAG_EXTERNAL)
+	if (ap->pflags & ATA_PFLAG_EXTERNAL) {
+		ata_port_dbg(ap, "external port, not enabling LPM\n");
 		return;
+	}
 
 	/* If no LPM states are supported by the HBA, do not bother with LPM */
 	if ((ap->host->flags & ATA_HOST_NO_PART) &&
-- 
2.45.2





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux