On Mon, 2024-07-01 at 11:03 -0700, Bart Van Assche wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> UFSHCI controllers that are compliant with the UFSHCI 4.0 standard
> report
> the maximum number of supported commands in the controller
> capabilities
> register. Use that value if .get_hba_mac == NULL.
>
> Reviewed-by: Daejun Park <daejun7.park@xxxxxxxxxxx>
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> ---
> drivers/ufs/core/ufs-mcq.c | 15 +++++++++------
> include/ufs/ufshcd.h | 4 +++-
> include/ufs/ufshci.h | 1 +
> 3 files changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index 0482c7a1e419..f4cc4b0676f7 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -138,18 +138,21 @@ EXPORT_SYMBOL_GPL(ufshcd_mcq_queue_cfg_addr);
> *
> * MAC - Max. Active Command of the Host Controller (HC)
> * HC wouldn't send more than this commands to the device.
> - * It is mandatory to implement get_hba_mac() to enable MCQ mode.
> * Calculates and adjusts the queue depth based on the depth
> * supported by the HC and ufs device.
> */
> int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba)
> {
> - int mac = -EOPNOTSUPP;
> + int mac;
>
> - if (!hba->vops || !hba->vops->get_hba_mac)
> - goto err;
> -
> - mac = hba->vops->get_hba_mac(hba);
> + if (!hba->vops || !hba->vops->get_hba_mac) {
> + hba->capabilities =
> + ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
> + mac = hba->capabilities &
> MASK_TRANSFER_REQUESTS_SLOTS_MCQ;
>
Hi Bart,
Before ufshcd_mcq_enable,
here read REG_CONTROLLER_CAPABILITIES should be SDB value.
Beacuse MCQ is not enable.
Thanks.
Peter
> + mac++;
> + } else {
> + mac = hba->vops->get_hba_mac(hba);
> + }
> if (mac < 0)
> goto err;
>
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index d4d63507d090..d32637d267f3 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -325,7 +325,9 @@ struct ufs_pwr_mode_info {
> * @event_notify: called to notify important events
> * @reinit_notify: called to notify reinit of UFSHCD during max gear
> switch
> * @mcq_config_resource: called to configure MCQ platform resources
> - * @get_hba_mac: called to get vendor specific mac value, mandatory
> for mcq mode
> + * @get_hba_mac: reports maximum number of outstanding commands
> supported by
> + * the controller. Should be implemented for UFSHCI 4.0 or later
> + * controllers that are not compliant with the UFSHCI 4.0
> specification.
> * @op_runtime_config: called to config Operation and runtime regs
> Pointers
> * @get_outstanding_cqs: called to get outstanding completion queues
> * @config_esi: called to config Event Specific Interrupt
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index 8d0cc73537c6..38fe97971a65 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -68,6 +68,7 @@ enum {
> /* Controller capability masks */
> enum {
> MASK_TRANSFER_REQUESTS_SLOTS_SDB = 0x0000001F,
> + MASK_TRANSFER_REQUESTS_SLOTS_MCQ = 0x000000FF,
> MASK_NUMBER_OUTSTANDING_RTT = 0x0000FF00,
> MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
> MASK_EHSLUTRD_SUPPORTED = 0x00400000,
