[PATCH 1/8] lpfc: Cancel ELS WQE instead of issuing abort when SLI port is inactive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During SLI port errata events, there should be no expectation that
submitted outstanding WQEs will return back CQEs.  In these situations, the
driver should not rely on receiving CQEs from the SLI port to signal WQE
resource clean up.

Put an sli_flag LPFC_SLI_ACTIVE check in lpfc_els_flush_cmd when walking
the txcmplq.  The sli_flag check helps determine whether to issue an abort
or driver based cancel on outstanding WQEs.  If !LPFC_SLI_ACTIVE, then
there's no point to issue anything to the SLI port.  Instead, let the
driver based cancel logic clean up the submitted WQE resources.

Also, enhance some abort log messages that help with future debugging.

Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_els.c |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c | 24 +++++++++++-------------
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index c32bc773ab29..b27ebb574bfb 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -9665,7 +9665,7 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 	list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
 		list_del_init(&piocb->dlist);
-		if (mbx_tmo_err)
+		if (mbx_tmo_err || !(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
 			list_move_tail(&piocb->list, &cancel_list);
 		else
 			lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f475e7ece41a..8bfac9143314 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12301,18 +12301,16 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				goto release_iocb;
 			}
 		}
-
-		lpfc_printf_log(phba, KERN_WARNING, LOG_ELS | LOG_SLI,
-				"0327 Cannot abort els iocb x%px "
-				"with io cmd xri %x abort tag : x%x, "
-				"abort status %x abort code %x\n",
-				cmdiocb, get_job_abtsiotag(phba, cmdiocb),
-				(phba->sli_rev == LPFC_SLI_REV4) ?
-				get_wqe_reqtag(cmdiocb) :
-				cmdiocb->iocb.un.acxri.abortContextTag,
-				ulp_status, ulp_word4);
-
 	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS | LOG_SLI,
+			"0327 Abort els iocb complete x%px with io cmd xri %x "
+			"abort tag x%x abort status %x abort code %x\n",
+			cmdiocb, get_job_abtsiotag(phba, cmdiocb),
+			(phba->sli_rev == LPFC_SLI_REV4) ?
+			get_wqe_reqtag(cmdiocb) :
+			cmdiocb->iocb.ulpIoTag,
+			ulp_status, ulp_word4);
 release_iocb:
 	lpfc_sli_release_iocbq(phba, cmdiocb);
 	return;
@@ -12509,10 +12507,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
 			 "0339 Abort IO XRI x%x, Original iotag x%x, "
 			 "abort tag x%x Cmdjob : x%px Abortjob : x%px "
-			 "retval x%x : IA %d\n",
+			 "retval x%x : IA %d cmd_cmpl %ps\n",
 			 ulp_context, (phba->sli_rev == LPFC_SLI_REV4) ?
 			 cmdiocb->iotag : iotag, iotag, cmdiocb, abtsiocbp,
-			 retval, ia);
+			 retval, ia, abtsiocbp->cmd_cmpl);
 	if (retval) {
 		cmdiocb->cmd_flag &= ~LPFC_DRIVER_ABORTED;
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
-- 
2.38.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux