https://bugzilla.kernel.org/show_bug.cgi?id=209177 Guido Serra (zeph@xxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |zeph@xxxxxxxx --- Comment #8 from Guido Serra (zeph@xxxxxxxx) --- Hi, I'm having probably a related issue to this one on 6.1.0-21-amd64 Debian/bookwork (plain new installation). I cannot see any of the devices attached to this card, lsscsi returns only the devices attached to the motherboard 23:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Broadcom / LSI 9210-8i Flags: bus master, fast devsel, latency 0, IRQ 40, IOMMU group 25 I/O ports at e000 [size=256] Memory at e2540000 (64-bit, non-prefetchable) [size=16K] Memory at e2100000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at <ignored> [disabled] Capabilities: [50] Power Management version 3 Capabilities: [68] Express Endpoint, MSI 00 Capabilities: [d0] Vital Product Data Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [c0] MSI-X: Enable+ Count=15 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Power Budgeting <?> Capabilities: [150] Single Root I/O Virtualization (SR-IOV) Capabilities: [190] Alternative Routing-ID Interpretation (ARI) Kernel driver in use: mpt3sas Kernel modules: mpt3sas I attempted, as reported on several forums, to alter `mpt3sas.max_queue_depth=10000` as the Queue detected was pretty low mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432) The change seem to have absolutely no effect... shall I open a new bug? Want me to create a bug at Debian first? how can I proceed here? I initially opened one here as the initial installation was a Mint, and the ticket was closed abruptly https://github.com/linuxmint/cinnamon/issues/12251 -- You may reply to this email to add a comment. You are receiving this mail because: You are on the CC list for the bug.
