+ Can
On Wed, Jun 19, 2024 at 12:43:29PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Jun 17, 2024 at 02:07:43PM -0700, Bart Van Assche wrote:
> > UFSHCI controllers that are compliant with the UFSHCI 4.0 standard report
> > the maximum number of supported commands in the controller capabilities
> > register. Use that value if .get_hba_mac == NULL.
> >
> > Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> > ---
> > drivers/ufs/core/ufs-mcq.c | 12 +++++++-----
> > include/ufs/ufshcd.h | 4 +++-
> > include/ufs/ufshci.h | 2 +-
> > 3 files changed, 11 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> > index 0482c7a1e419..d6f966f4abef 100644
> > --- a/drivers/ufs/core/ufs-mcq.c
> > +++ b/drivers/ufs/core/ufs-mcq.c
> > @@ -138,7 +138,6 @@ EXPORT_SYMBOL_GPL(ufshcd_mcq_queue_cfg_addr);
> > *
> > * MAC - Max. Active Command of the Host Controller (HC)
> > * HC wouldn't send more than this commands to the device.
> > - * It is mandatory to implement get_hba_mac() to enable MCQ mode.
> > * Calculates and adjusts the queue depth based on the depth
> > * supported by the HC and ufs device.
> > */
> > @@ -146,10 +145,13 @@ int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba)
> > {
> > int mac = -EOPNOTSUPP;
> >
> > - if (!hba->vops || !hba->vops->get_hba_mac)
> > - goto err;
> > -
> > - mac = hba->vops->get_hba_mac(hba);
> > + if (!hba->vops || !hba->vops->get_hba_mac) {
> > + hba->capabilities =
> > + ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
> > + mac = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
> > + } else {
> > + mac = hba->vops->get_hba_mac(hba);
> > + }
> > if (mac < 0)
> > goto err;
> >
> > diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> > index d4d63507d090..d32637d267f3 100644
> > --- a/include/ufs/ufshcd.h
> > +++ b/include/ufs/ufshcd.h
> > @@ -325,7 +325,9 @@ struct ufs_pwr_mode_info {
> > * @event_notify: called to notify important events
> > * @reinit_notify: called to notify reinit of UFSHCD during max gear switch
> > * @mcq_config_resource: called to configure MCQ platform resources
> > - * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode
> > + * @get_hba_mac: reports maximum number of outstanding commands supported by
> > + * the controller. Should be implemented for UFSHCI 4.0 or later
> > + * controllers that are not compliant with the UFSHCI 4.0 specification.
> > * @op_runtime_config: called to config Operation and runtime regs Pointers
> > * @get_outstanding_cqs: called to get outstanding completion queues
> > * @config_esi: called to config Event Specific Interrupt
> > diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> > index c50f92bf2e1d..899077bba2d2 100644
> > --- a/include/ufs/ufshci.h
> > +++ b/include/ufs/ufshci.h
> > @@ -67,7 +67,7 @@ enum {
> >
> > /* Controller capability masks */
> > enum {
> > - MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
> > + MASK_TRANSFER_REQUESTS_SLOTS = 0x000000FF,
>
> This should be a separate fix that comes before this patch. But I believe this
> came up during MCQ review as well and I don't remember what was the reply from
> Can. 0x1F is the mask for SDB mode and 0xFF is the mask for MCQ mode.
>
> Can, can you comment more?
>
Oops. Can is not CCed. Added now.
- Mani
> - Mani
>
> --
> மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்
