Re: [PATCH v3] scsi: libsas: Fix exp-attached end device cannot be scanned in again after probe failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/06/2024 12:45, yangxingui wrote:
Hi, John,

Thanks for your reply.

On 2024/6/18 16:55, John Garry wrote:
On 13/06/2024 13:23, Xingui Yang wrote:

Sorry for delay in responding and asking further questions.
It doesn't matter.

We found that it is judged as broadcast flutter when the exp-attached end
device reconnects after probe failed, as follows:

[78779.654026] sas: broadcast received: 0
[78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
[78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
[78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp)
[78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
[78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
[78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
...
[78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19
[78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
[78835.187487] sas: broadcast received: 0
[78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
[78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
[78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp)
[78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
[78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0

The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed. In order to solve the above
problem, a function sas_ex_unregister_end_dev() is defined to clear the
ex_phy information and unregister the end device after the exp-attached end
device probe failed.

Can you just manually clear the ex_phy's attached_sas_addr at the appropiate point (along with calling sas_unregister_dev())? It seems that we are using heavy-handed approach in calling sas_unregister_devs_sas_addr(), which does the clearing and much more.

I just tried it and it worked. If we only clear ex_phy's attached_sas_addr, there is no need to call sas_destruct_ports(). We are currently using sas_unregister_devs_sas_addr() which will add the port to sas_port_del_list, so we need to call sas_destruct_ports() separately to delete the port.

Should we also delete the port after the devices probe failed?

I'm not sure. Please check it.

sas_fail_probe() would still call sas_unregister_dev(), as required.

And you said that the sas_fail_probe() probe call would be asynchronous to sas_revalidate_domainin(). I actually expected you to have the new call to sas_destruct_ports() at the top of sas_revalidate_domainin(), like v2, but it is in sas_probe_devices().

Anyway, please check whether you require this additional call to delete the port.


Maybe I can update another version and only clear ex_phy's attached_sas_addr based on your suggestions.


As devices may probe failed after done REVALIDATING DOMAIN when call
sas_probe_devices(). Then after its port is added to the sas_port_del_list, the port will not be deleted until the end of the next REVALIDATING DOMAIN
and sas_destruct_ports() is called. A warning about creating a duplicate
port will occur in the new REVALIDATING DOMAIN when the end device
reconnects. Therefore, the previous destroy_list and sas_port_del_list
should be handled after devices probe failed.

Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx>
---
Changes since v2:
- Add a helper for calling sas_destruct_devices() and sas_destruct_ports(),    and put the new call at the end of sas_probe_devices() based on John's
   suggestion.

Changes since v1:
- Simplify the process of getting ex_phy id based on Jason's suggestion.
- Update commit information.
---
  drivers/scsi/libsas/sas_discover.c | 32 +++++++++++++++++++-----------
  drivers/scsi/libsas/sas_expander.c |  8 ++++++++
  drivers/scsi/libsas/sas_internal.h |  6 +++++-
  3 files changed, 33 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 8fb7c41c0962..8c517e47d2b9 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -17,6 +17,22 @@
  #include <scsi/sas_ata.h>
  #include "scsi_sas_internal.h"
+static void sas_destruct_ports(struct asd_sas_port *port)
+{
+    struct sas_port *sas_port, *p;
+
+    list_for_each_entry_safe(sas_port, p, &port->sas_port_del_list, del_list) {
+        list_del_init(&sas_port->del_list);
+        sas_port_delete(sas_port);
+    }
+}
+
+static void sas_destruct_devices_and_ports(struct asd_sas_port *port)

"and" in a function name never sounds right.

Can you just call sas_destruct_port(), as it takes a port arg? Maybe rename sas_destruct_ports() to sas_delete_ports(), as it does "delete" - this may avoid some confusion in names.
As described above, if we only clear ex_phy's attached_sas_addr, we do not need to call sas_destruct_ports().

Thanks,
John






[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux