[PATCH v5 1/4] mpi3mr: HDB allocation and posting for hardware and Firmware buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds functions require to allocate and post
firmware and hardware diagnostic buffers to the controller
and to setup automatic diagnostic capture triggers

Reported-by: kernel test robot <lkp@xxxxxxxxx>
Closes: https://lore.kernel.org/oe-kbuild-all/202405151758.7xrJz6rp-lkp@xxxxxxxxx/
Signed-off-by: Sathya Prakash <sathya.prakash@xxxxxxxxxxxx>
Signed-off-by: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
---
 drivers/scsi/mpi3mr/mpi/mpi30_tool.h |  44 +++
 drivers/scsi/mpi3mr/mpi3mr.h         |  74 +++++
 drivers/scsi/mpi3mr/mpi3mr_app.c     | 480 +++++++++++++++++++++++++++
 drivers/scsi/mpi3mr/mpi3mr_fw.c      | 193 ++++++++++-
 4 files changed, 790 insertions(+), 1 deletion(-)
 create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_tool.h

diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_tool.h b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h
new file mode 100644
index 000000000000..3b960893870f
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright 2016-2024 Broadcom Inc. All rights reserved.
+ */
+#ifndef MPI30_TOOL_H
+#define MPI30_TOOL_H     1
+
+#define MPI3_DIAG_BUFFER_TYPE_TRACE	(0x01)
+#define MPI3_DIAG_BUFFER_TYPE_FW	(0x02)
+#define MPI3_DIAG_BUFFER_ACTION_RELEASE	(0x01)
+
+struct mpi3_diag_buffer_post_request {
+	__le16                     host_tag;
+	u8                         ioc_use_only02;
+	u8                         function;
+	__le16                     ioc_use_only04;
+	u8                         ioc_use_only06;
+	u8                         msg_flags;
+	__le16                     change_count;
+	__le16                     reserved0a;
+	u8                         type;
+	u8                         reserved0d;
+	__le16                     reserved0e;
+	__le64                     address;
+	__le32                     length;
+	__le32                     reserved1c;
+};
+
+struct mpi3_diag_buffer_manage_request {
+	__le16                     host_tag;
+	u8                         ioc_use_only02;
+	u8                         function;
+	__le16                     ioc_use_only04;
+	u8                         ioc_use_only06;
+	u8                         msg_flags;
+	__le16                     change_count;
+	__le16                     reserved0a;
+	u8                         type;
+	u8                         action;
+	__le16                     reserved0e;
+};
+
+
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index f5a1529fa537..9aae59646faa 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -47,6 +47,7 @@
 #include "mpi/mpi30_ioc.h"
 #include "mpi/mpi30_sas.h"
 #include "mpi/mpi30_pci.h"
+#include "mpi/mpi30_tool.h"
 #include "mpi3mr_debug.h"
 
 /* Global list and lock for storing multiple adapters managed by the driver */
@@ -187,6 +188,13 @@ extern atomic64_t event_counter;
 #define MPI3MR_HARD_SECURE_DEVICE		0x08
 #define MPI3MR_TAMPERED_DEVICE			0x0C
 
+#define MPI3MR_DEFAULT_HDB_MAX_SZ       (4 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_DEC_SZ       (1 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_MIN_SZ       (2 * 1024 * 1024)
+#define MPI3MR_MAX_NUM_HDB      2
+
+#define MPI3MR_HDB_TRIGGER_TYPE_GLOBAL          3
+
 /* SGE Flag definition */
 #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
 	(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -210,6 +218,7 @@ extern atomic64_t event_counter;
 #define MPI3MR_WRITE_SAME_MAX_LEN_256_BLKS 256
 #define MPI3MR_WRITE_SAME_MAX_LEN_2048_BLKS 2048
 
+
 /**
  * struct mpi3mr_nvme_pt_sge -  Structure to store SGEs for NVMe
  * Encapsulated commands.
@@ -289,6 +298,8 @@ enum mpi3mr_reset_reason {
 	MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
 	MPI3MR_RESET_FROM_SYSFS = 23,
 	MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
+	MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT = 25,
+	MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT = 26,
 	MPI3MR_RESET_FROM_FIRMWARE = 27,
 	MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29,
 	MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30,
@@ -327,6 +338,9 @@ struct mpi3mr_ioc_facts {
 	u32 ioc_capabilities;
 	struct mpi3mr_compimg_ver fw_ver;
 	u32 mpi_version;
+	u32 diag_trace_sz;
+	u32 diag_fw_sz;
+	u32 diag_drvr_sz;
 	u16 max_reqs;
 	u16 product_id;
 	u16 op_req_sz;
@@ -852,6 +866,41 @@ struct mpi3mr_drv_cmd {
 	    struct mpi3mr_drv_cmd *drv_cmd);
 };
 
+/**
+ * union mpi3mr_trigger_data - Trigger data information
+ * @fault: Fault code
+ * @global: Global trigger data
+ * @element: element trigger data
+ */
+union mpi3mr_trigger_data {
+	u16 fault;
+	u64 global;
+	union mpi3_driver2_trigger_element element;
+};
+
+/**
+ * struct diag_buffer_desc - memory descriptor structure to
+ * store virtual, dma addresses, size, buffer status for host
+ * diagnostic buffers.
+ *
+ * @type: Buffer type
+ * @trigger_data: Trigger data
+ * @trigger_type: Trigger type
+ * @status: Buffer status
+ * @size: Buffer size
+ * @addr: Virtual address
+ * @dma_addr: Buffer DMA address
+ */
+struct diag_buffer_desc {
+	u8 type;
+	union mpi3mr_trigger_data trigger_data;
+	u8 trigger_type;
+	u8 status;
+	u32 size;
+	void *addr;
+	dma_addr_t dma_addr;
+};
+
 /**
  * struct dma_memory_desc - memory descriptor structure to store
  * virtual address, dma address and size for any generic dma
@@ -1054,6 +1103,11 @@ struct scmd_priv {
  * @sas_node_lock: Lock to protect SAS node list
  * @hba_port_table_list: List of HBA Ports
  * @enclosure_list: List of Enclosure objects
+ * @diag_buffers: Host diagnostic buffers
+ * @driver_pg2:  Driver page 2 pointer
+ * @reply_trigger_present: Reply trigger present flag
+ * @event_trigger_present: Event trigger present flag
+ * @scsisense_trigger_present: Scsi sense trigger present flag
  * @ioctl_dma_pool: DMA pool for IOCTL data buffers
  * @ioctl_sge: DMA buffer descriptors for IOCTL data
  * @ioctl_chain_sge: DMA buffer descriptor for IOCTL chain
@@ -1250,6 +1304,12 @@ struct mpi3mr_ioc {
 	struct dma_memory_desc ioctl_chain_sge;
 	struct dma_memory_desc ioctl_resp_sge;
 	bool ioctl_sges_allocated;
+	bool reply_trigger_present;
+	bool event_trigger_present;
+	bool scsisense_trigger_present;
+	struct diag_buffer_desc diag_buffers[MPI3MR_MAX_NUM_HDB];
+	struct mpi3_driver_page2 *driver_pg2;
+	spinlock_t trigger_lock;
 };
 
 /**
@@ -1406,6 +1466,8 @@ int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
 	struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
 int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
 	struct mpi3_driver_page1 *driver_pg1, u16 pg_sz);
+int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc,
+	struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_type);
 
 u8 mpi3mr_is_expander_device(u16 device_info);
 int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle);
@@ -1439,4 +1501,16 @@ void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc);
 int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc);
 void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc,
 	struct mpi3mr_sas_node *sas_expander);
+void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer);
+void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action);
+void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb,
+	u8 type, union mpi3mr_trigger_data *trigger_data, bool force);
+int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_type);
+struct diag_buffer_desc *mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc,
+	u8 buf_type);
+int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer);
 #endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index 3c309e8c3a2b..6bb006b7ef7e 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -11,6 +11,486 @@
 #include <linux/bsg-lib.h>
 #include <uapi/scsi/scsi_bsg_mpi3mr.h>
 
+/**
+ * mpi3mr_alloc_trace_buffer:	Allocate trace buffer
+ * @mrioc: Adapter instance reference
+ * @trace_size: Trace buffer size
+ *
+ * Allocate trace buffer
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_alloc_trace_buffer(struct mpi3mr_ioc *mrioc, u32 trace_size)
+{
+	struct diag_buffer_desc *diag_buffer = &mrioc->diag_buffers[0];
+
+	diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
+	    trace_size, &diag_buffer->dma_addr, GFP_KERNEL);
+	if (diag_buffer->addr) {
+		dprint_init(mrioc, "trace diag buffer is allocated successfully\n");
+		return 0;
+	}
+	return -1;
+}
+
+/**
+ * mpi3mr_alloc_diag_bufs - Allocate memory for diag buffers
+ * @mrioc: Adapter instance reference
+ *
+ * This functions checks whether the driver defined buffer sizes
+ * are greater than IOCFacts provided controller local buffer
+ * sizes and if the driver defined sizes are more then the
+ * driver allocates the specific buffer by reading driver page1
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+	struct diag_buffer_desc *diag_buffer;
+	struct mpi3_driver_page1 driver_pg1;
+	u32 trace_dec_size, trace_min_size, fw_dec_size, fw_min_size,
+		trace_size, fw_size;
+	u16 pg_sz = sizeof(driver_pg1);
+	int retval = 0;
+	bool retry = false;
+
+	if (mrioc->diag_buffers[0].addr || mrioc->diag_buffers[1].addr)
+		return;
+
+	retval = mpi3mr_cfg_get_driver_pg1(mrioc, &driver_pg1, pg_sz);
+	if (retval) {
+		ioc_warn(mrioc,
+		    "%s: driver page 1 read failed, allocating trace\n"
+		    "and firmware diag buffers of default size\n", __func__);
+		trace_size = fw_size = MPI3MR_DEFAULT_HDB_MAX_SZ;
+		trace_dec_size = fw_dec_size = MPI3MR_DEFAULT_HDB_DEC_SZ;
+		trace_min_size = fw_min_size = MPI3MR_DEFAULT_HDB_MIN_SZ;
+
+	} else {
+		trace_size = driver_pg1.host_diag_trace_max_size * 1024;
+		trace_dec_size = driver_pg1.host_diag_trace_decrement_size
+			 * 1024;
+		trace_min_size = driver_pg1.host_diag_trace_min_size * 1024;
+		fw_size = driver_pg1.host_diag_fw_max_size * 1024;
+		fw_dec_size = driver_pg1.host_diag_fw_decrement_size * 1024;
+		fw_min_size = driver_pg1.host_diag_fw_min_size * 1024;
+		dprint_init(mrioc,
+		    "%s:trace diag buffer sizes read from driver\n"
+		    "page1: maximum size = %dKB, decrement size = %dKB\n"
+		    ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_trace_max_size,
+		    driver_pg1.host_diag_trace_decrement_size,
+		    driver_pg1.host_diag_trace_min_size);
+		dprint_init(mrioc,
+		    "%s:firmware diag buffer sizes read from driver\n"
+		    "page1: maximum size = %dKB, decrement size = %dKB\n"
+		    ", minimum size = %dKB\n", __func__, driver_pg1.host_diag_fw_max_size,
+		    driver_pg1.host_diag_fw_decrement_size,
+		    driver_pg1.host_diag_fw_min_size);
+		if ((trace_size == 0) && (fw_size == 0))
+			return;
+	}
+
+
+retry_trace:
+	diag_buffer = &mrioc->diag_buffers[0];
+	diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_TRACE;
+	diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED;
+	if ((mrioc->facts.diag_trace_sz < trace_size) && (trace_size >=
+		trace_min_size)) {
+		if (!retry)
+			dprint_init(mrioc,
+			    "trying to allocate trace diag buffer of size = %dKB\n",
+			    trace_size / 1024);
+		if (mpi3mr_alloc_trace_buffer(mrioc, trace_size)) {
+			retry = true;
+			trace_size -= trace_dec_size;
+			dprint_init(mrioc, "trace diag buffer allocation failed\n"
+			"retrying smaller size %dKB\n", trace_size / 1024);
+			goto retry_trace;
+		} else
+			diag_buffer->size = trace_size;
+	}
+
+	retry = false;
+retry_fw:
+
+	diag_buffer = &mrioc->diag_buffers[1];
+
+	diag_buffer->type = MPI3_DIAG_BUFFER_TYPE_FW;
+	diag_buffer->status = MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED;
+	if ((mrioc->facts.diag_fw_sz < fw_size) && (fw_size >= fw_min_size)) {
+		diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
+		    fw_size, &diag_buffer->dma_addr, GFP_KERNEL);
+		if (!retry)
+			dprint_init(mrioc,
+			    "%s:trying to allocate firmware diag buffer of size = %dKB\n",
+			    __func__, fw_size / 1024);
+		if (diag_buffer->addr) {
+			dprint_init(mrioc, "%s:firmware diag buffer allocated successfully\n",
+			    __func__);
+			diag_buffer->size = fw_size;
+		} else {
+			retry = true;
+			fw_size -= fw_dec_size;
+			dprint_init(mrioc, "%s:trace diag buffer allocation failed,\n"
+					"retrying smaller size %dKB\n",
+					__func__, fw_size / 1024);
+			goto retry_fw;
+		}
+	}
+}
+
+/**
+ * mpi3mr_issue_diag_buf_post - Send diag buffer post req
+ * @mrioc: Adapter instance reference
+ * @diag_buffer: Diagnostic buffer descriptor
+ *
+ * Issue diagnostic buffer post MPI request through admin queue
+ * and wait for the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer)
+{
+	struct mpi3_diag_buffer_post_request diag_buf_post_req;
+	u8 prev_status;
+	int retval = 0;
+
+	memset(&diag_buf_post_req, 0, sizeof(diag_buf_post_req));
+	mutex_lock(&mrioc->init_cmds.mutex);
+	if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+		dprint_bsg_err(mrioc, "%s: command is in use\n", __func__);
+		mutex_unlock(&mrioc->init_cmds.mutex);
+		return -1;
+	}
+	mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+	mrioc->init_cmds.is_waiting = 1;
+	mrioc->init_cmds.callback = NULL;
+	diag_buf_post_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+	diag_buf_post_req.function = MPI3_FUNCTION_DIAG_BUFFER_POST;
+	diag_buf_post_req.type = diag_buffer->type;
+	diag_buf_post_req.address = le64_to_cpu(diag_buffer->dma_addr);
+	diag_buf_post_req.length = le32_to_cpu(diag_buffer->size);
+
+	dprint_bsg_info(mrioc, "%s: posting diag buffer type %d\n", __func__,
+	    diag_buffer->type);
+	prev_status = diag_buffer->status;
+	diag_buffer->status = MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED;
+	init_completion(&mrioc->init_cmds.done);
+	retval = mpi3mr_admin_request_post(mrioc, &diag_buf_post_req,
+	    sizeof(diag_buf_post_req), 1);
+	if (retval) {
+		dprint_bsg_err(mrioc, "%s: admin request post failed\n",
+		    __func__);
+		goto out_unlock;
+	}
+	wait_for_completion_timeout(&mrioc->init_cmds.done,
+	    (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+	if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+		mrioc->init_cmds.is_waiting = 0;
+		dprint_bsg_err(mrioc, "%s: command timedout\n", __func__);
+		mpi3mr_check_rh_fault_ioc(mrioc,
+		    MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT);
+		retval = -1;
+		goto out_unlock;
+	}
+	if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+	    != MPI3_IOCSTATUS_SUCCESS) {
+		dprint_bsg_err(mrioc,
+		    "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n",
+		    __func__, diag_buffer->type,
+		    (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+		    mrioc->init_cmds.ioc_loginfo);
+		retval = -1;
+		goto out_unlock;
+	}
+	dprint_bsg_info(mrioc, "%s: diag buffer type %d posted successfully\n",
+	    __func__, diag_buffer->type);
+
+out_unlock:
+	if (retval)
+		diag_buffer->status = prev_status;
+	mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+	mutex_unlock(&mrioc->init_cmds.mutex);
+	return retval;
+}
+
+/**
+ * mpi3mr_post_diag_bufs - Post diag buffers to the controller
+ * @mrioc: Adapter instance reference
+ *
+ * This function calls helper function to post both trace and
+ * firmware buffers to the controller.
+ *
+ * Return: None
+ */
+int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+	u8 i;
+	struct diag_buffer_desc *diag_buffer;
+
+	for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+		diag_buffer = &mrioc->diag_buffers[i];
+		if (!(diag_buffer->addr))
+			continue;
+		if (mpi3mr_issue_diag_buf_post(mrioc, diag_buffer))
+			return -1;
+	}
+	return 0;
+}
+
+/**
+ * mpi3mr_issue_diag_buf_release - Send diag buffer release req
+ * @mrioc: Adapter instance reference
+ * @diag_buffer: Diagnostic buffer descriptor
+ *
+ * Issue diagnostic buffer manage MPI request with release
+ * action request through admin queue and wait for the
+ * completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer)
+{
+	struct mpi3_diag_buffer_manage_request diag_buf_manage_req;
+	int retval = 0;
+
+	if ((diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED) &&
+	    (diag_buffer->status != MPI3MR_HDB_BUFSTATUS_POSTED_PAUSED))
+		return retval;
+
+	memset(&diag_buf_manage_req, 0, sizeof(diag_buf_manage_req));
+	mutex_lock(&mrioc->init_cmds.mutex);
+	if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+		dprint_reset(mrioc, "%s: command is in use\n", __func__);
+		mutex_unlock(&mrioc->init_cmds.mutex);
+		return -1;
+	}
+	mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+	mrioc->init_cmds.is_waiting = 1;
+	mrioc->init_cmds.callback = NULL;
+	diag_buf_manage_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+	diag_buf_manage_req.function = MPI3_FUNCTION_DIAG_BUFFER_MANAGE;
+	diag_buf_manage_req.type = diag_buffer->type;
+	diag_buf_manage_req.action = MPI3_DIAG_BUFFER_ACTION_RELEASE;
+
+
+	dprint_reset(mrioc, "%s: releasing diag buffer type %d\n", __func__,
+	    diag_buffer->type);
+	init_completion(&mrioc->init_cmds.done);
+	retval = mpi3mr_admin_request_post(mrioc, &diag_buf_manage_req,
+	    sizeof(diag_buf_manage_req), 1);
+	if (retval) {
+		dprint_reset(mrioc, "%s: admin request post failed\n", __func__);
+		mpi3mr_set_trigger_data_in_hdb(diag_buffer,
+		    MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+		goto out_unlock;
+	}
+	wait_for_completion_timeout(&mrioc->init_cmds.done,
+	    (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+	if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+		mrioc->init_cmds.is_waiting = 0;
+		dprint_reset(mrioc, "%s: command timedout\n", __func__);
+		mpi3mr_check_rh_fault_ioc(mrioc,
+		    MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT);
+		retval = -1;
+		goto out_unlock;
+	}
+	if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+	    != MPI3_IOCSTATUS_SUCCESS) {
+		dprint_reset(mrioc,
+		    "%s: command failed, buffer_type (%d) ioc_status(0x%04x) log_info(0x%08x)\n",
+		    __func__, diag_buffer->type,
+		    (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+		    mrioc->init_cmds.ioc_loginfo);
+		retval = -1;
+		goto out_unlock;
+	}
+	dprint_reset(mrioc, "%s: diag buffer type %d released successfully\n",
+	    __func__, diag_buffer->type);
+
+out_unlock:
+	mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+	mutex_unlock(&mrioc->init_cmds.mutex);
+	return retval;
+}
+
+/**
+ * mpi3mr_get_num_trigger - Gets number of HDB triggers
+ * @mrioc: Adapter instance reference
+ * @num_triggers: Number of triggers
+ * @page_action: Page action
+ *
+ * This function reads number of triggers by reading driver page
+ * 2
+ *
+ * Return: 0 on success and proper error codes on failure
+ */
+static int mpi3mr_get_num_trigger(struct mpi3mr_ioc *mrioc, u8 *num_triggers,
+	u8 page_action)
+{
+	struct mpi3_driver_page2 drvr_page2;
+	int retval = 0;
+
+	*num_triggers = 0;
+
+	retval = mpi3mr_cfg_get_driver_pg2(mrioc, &drvr_page2,
+	    sizeof(struct mpi3_driver_page2), page_action);
+
+	if (retval) {
+		dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__);
+		return retval;
+	}
+	*num_triggers = drvr_page2.num_triggers;
+	return retval;
+}
+
+/**
+ * mpi3mr_refresh_trigger - Handler for Refresh trigger BSG
+ * @mrioc: Adapter instance reference
+ * @page_action: Page action
+ *
+ * This function caches the driver page 2 in the driver's memory
+ * by reading driver page 2 from the controller for a given page
+ * type and updates the HDB trigger values
+ *
+ * Return: 0 on success and proper error codes on failure
+ */
+int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_action)
+{
+	u16 pg_sz = sizeof(struct mpi3_driver_page2);
+	struct mpi3_driver_page2 *drvr_page2 = NULL;
+	u8 trigger_type, num_triggers;
+	int retval;
+	int i = 0;
+	unsigned long flags;
+
+	retval = mpi3mr_get_num_trigger(mrioc, &num_triggers, page_action);
+
+	if (retval)
+		goto out;
+
+	pg_sz = offsetof(struct mpi3_driver_page2, trigger) +
+		(num_triggers * sizeof(union mpi3_driver2_trigger_element));
+	drvr_page2 = kzalloc(pg_sz, GFP_KERNEL);
+	if (!drvr_page2) {
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	retval = mpi3mr_cfg_get_driver_pg2(mrioc, drvr_page2, pg_sz, page_action);
+	if (retval) {
+		dprint_init(mrioc, "%s: driver page 2 read failed\n", __func__);
+		kfree(drvr_page2);
+		goto out;
+	}
+	spin_lock_irqsave(&mrioc->trigger_lock, flags);
+	kfree(mrioc->driver_pg2);
+	mrioc->driver_pg2 = drvr_page2;
+	mrioc->reply_trigger_present = false;
+	mrioc->event_trigger_present = false;
+	mrioc->scsisense_trigger_present = false;
+
+	for (i = 0; (i < mrioc->driver_pg2->num_triggers); i++) {
+		trigger_type = mrioc->driver_pg2->trigger[i].event.type;
+		switch (trigger_type) {
+		case MPI3_DRIVER2_TRIGGER_TYPE_REPLY:
+			mrioc->reply_trigger_present = true;
+			break;
+		case MPI3_DRIVER2_TRIGGER_TYPE_EVENT:
+			mrioc->event_trigger_present = true;
+			break;
+		case MPI3_DRIVER2_TRIGGER_TYPE_SCSI_SENSE:
+			mrioc->scsisense_trigger_present = true;
+			break;
+		default:
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&mrioc->trigger_lock, flags);
+out:
+	return retval;
+}
+
+/**
+ * mpi3mr_release_diag_bufs - Release diag buffers
+ * @mrioc: Adapter instance reference
+ * @skip_rel_action: Skip release action and set buffer state
+ *
+ * This function calls helper function to release both trace and
+ * firmware buffers from the controller.
+ *
+ * Return: None
+ */
+void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action)
+{
+	u8 i;
+	struct diag_buffer_desc *diag_buffer;
+
+	for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+		diag_buffer = &mrioc->diag_buffers[i];
+		if (!(diag_buffer->addr))
+			continue;
+		if (diag_buffer->status == MPI3MR_HDB_BUFSTATUS_RELEASED)
+			continue;
+		if (!skip_rel_action)
+			mpi3mr_issue_diag_buf_release(mrioc, diag_buffer);
+		diag_buffer->status = MPI3MR_HDB_BUFSTATUS_RELEASED;
+		atomic64_inc(&event_counter);
+	}
+}
+
+/**
+ * mpi3mr_set_trigger_data_in_hdb - Updates HDB trigger type and
+ * trigger data
+ *
+ * @hdb: HDB pointer
+ * @type: Trigger type
+ * @data: Trigger data
+ * @force: Trigger overwrite flag
+ * @trigger_data: pointer to trigger data information
+ *
+ * Updates trigger type and trigger data based on parameter
+ * passed to this function
+ *
+ * Return: Nothing
+ */
+void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb,
+	u8 type, union mpi3mr_trigger_data *trigger_data, bool force)
+{
+	if ((!force) && (hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN))
+		return;
+	hdb->trigger_type = type;
+	if (!trigger_data)
+		memset(&hdb->trigger_data, 0, sizeof(*trigger_data));
+	else
+		memcpy(&hdb->trigger_data, trigger_data, sizeof(*trigger_data));
+}
+
+/**
+ * mpi3mr_diag_buffer_for_type - returns buffer desc for type
+ * @mrioc: Adapter instance reference
+ * @buf_type: Diagnostic buffer type
+ *
+ * Identifies matching diag descriptor from mrioc for given diag
+ * buffer type.
+ *
+ * Return: diag buffer descriptor on success, NULL on failures.
+ */
+
+struct diag_buffer_desc *
+mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc, u8 buf_type)
+{
+	u8 i;
+
+	for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+		if (mrioc->diag_buffers[i].type == buf_type)
+			return &mrioc->diag_buffers[i];
+	}
+	return NULL;
+}
+
 /**
  * mpi3mr_bsg_pel_abort - sends PEL abort request
  * @mrioc: Adapter instance reference
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index c2a22e96f7b7..fbd6f32f79ce 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3003,7 +3003,11 @@ static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc,
 	mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift;
 	mrioc->facts.shutdown_timeout =
 	    le16_to_cpu(facts_data->shutdown_timeout);
-
+	mrioc->facts.diag_trace_sz =
+	    le32_to_cpu(facts_data->diag_trace_size);
+	mrioc->facts.diag_fw_sz =
+	    le32_to_cpu(facts_data->diag_fw_size);
+	mrioc->facts.diag_drvr_sz = le32_to_cpu(facts_data->diag_driver_size);
 	mrioc->facts.max_dev_per_tg =
 	    facts_data->max_devices_per_throttle_group;
 	mrioc->facts.io_throttle_data_length =
@@ -3681,6 +3685,94 @@ static const struct {
 	{ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED, "MultiPath" },
 };
 
+/**
+ * mpi3mr_repost_diag_bufs - repost host diag buffers
+ * @mrioc: Adapter instance reference
+ *
+ * repost firmware and trace diag buffers based on global
+ * trigger flag from driver page 2
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_repost_diag_bufs(struct mpi3mr_ioc *mrioc)
+{
+	u64 global_trigger;
+	union mpi3mr_trigger_data prev_trigger_data;
+	struct diag_buffer_desc *trace_hdb = NULL;
+	struct diag_buffer_desc *fw_hdb = NULL;
+	int retval = 0;
+	bool trace_repost_needed = false;
+	bool fw_repost_needed = false;
+	u8 prev_trigger_type;
+
+	retval = mpi3mr_refresh_trigger(mrioc, MPI3_CONFIG_ACTION_READ_CURRENT);
+	if (retval)
+		return -1;
+
+	trace_hdb = mpi3mr_diag_buffer_for_type(mrioc,
+	    MPI3_DIAG_BUFFER_TYPE_TRACE);
+
+	if (trace_hdb &&
+	    trace_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED &&
+	    trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL &&
+	    trace_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT)
+		trace_repost_needed = true;
+
+	fw_hdb = mpi3mr_diag_buffer_for_type(mrioc, MPI3_DIAG_BUFFER_TYPE_FW);
+
+	if (fw_hdb && fw_hdb->status != MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED &&
+	    fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_GLOBAL &&
+	    fw_hdb->trigger_type != MPI3MR_HDB_TRIGGER_TYPE_ELEMENT)
+		fw_repost_needed = true;
+
+	if (trace_repost_needed || fw_repost_needed) {
+		global_trigger = le64_to_cpu(mrioc->driver_pg2->global_trigger);
+		if (global_trigger &
+		      MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_TRACE_DISABLED)
+			trace_repost_needed = false;
+		if (global_trigger &
+		     MPI3_DRIVER2_GLOBALTRIGGER_POST_DIAG_FW_DISABLED)
+			fw_repost_needed = false;
+	}
+
+	if (trace_repost_needed) {
+		prev_trigger_type = trace_hdb->trigger_type;
+		memcpy(&prev_trigger_data, &trace_hdb->trigger_data,
+		    sizeof(trace_hdb->trigger_data));
+		retval = mpi3mr_issue_diag_buf_post(mrioc, trace_hdb);
+		if (!retval) {
+			dprint_init(mrioc, "trace diag buffer reposted");
+			mpi3mr_set_trigger_data_in_hdb(trace_hdb,
+				    MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+		} else {
+			trace_hdb->trigger_type = prev_trigger_type;
+			memcpy(&trace_hdb->trigger_data, &prev_trigger_data,
+			    sizeof(prev_trigger_data));
+			ioc_err(mrioc, "trace diag buffer repost failed");
+			return -1;
+		}
+	}
+
+	if (fw_repost_needed) {
+		prev_trigger_type = fw_hdb->trigger_type;
+		memcpy(&prev_trigger_data, &fw_hdb->trigger_data,
+		    sizeof(fw_hdb->trigger_data));
+		retval = mpi3mr_issue_diag_buf_post(mrioc, fw_hdb);
+		if (!retval) {
+			dprint_init(mrioc, "firmware diag buffer reposted");
+			mpi3mr_set_trigger_data_in_hdb(fw_hdb,
+				    MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN, NULL, 1);
+		} else {
+			fw_hdb->trigger_type = prev_trigger_type;
+			memcpy(&fw_hdb->trigger_data, &prev_trigger_data,
+			    sizeof(prev_trigger_data));
+			ioc_err(mrioc, "firmware diag buffer repost failed");
+			return -1;
+		}
+	}
+	return retval;
+}
+
 /**
  * mpi3mr_print_ioc_info - Display controller information
  * @mrioc: Adapter instance reference
@@ -3989,9 +4081,18 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
 		}
 	}
 
+	dprint_init(mrioc, "allocating host diag buffers\n");
+	mpi3mr_alloc_diag_bufs(mrioc);
+
 	dprint_init(mrioc, "allocating ioctl dma buffers\n");
 	mpi3mr_alloc_ioctl_dma_memory(mrioc);
 
+	dprint_init(mrioc, "posting host diag buffers\n");
+	retval = mpi3mr_post_diag_bufs(mrioc);
+
+	if (retval)
+		ioc_warn(mrioc, "failed to post host diag buffers\n");
+
 	if (!mrioc->init_cmds.reply) {
 		retval = mpi3mr_alloc_reply_sense_bufs(mrioc);
 		if (retval) {
@@ -4144,6 +4245,17 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
 
 	mpi3mr_print_ioc_info(mrioc);
 
+	if (is_resume) {
+		dprint_reset(mrioc, "posting host diag buffers\n");
+		retval = mpi3mr_post_diag_bufs(mrioc);
+		if (retval)
+			ioc_warn(mrioc, "failed to post host diag buffers\n");
+	} else {
+		retval = mpi3mr_repost_diag_bufs(mrioc);
+		if (retval)
+			ioc_warn(mrioc, "failed to re post host diag buffers\n");
+	}
+
 	dprint_reset(mrioc, "sending ioc_init\n");
 	retval = mpi3mr_issue_iocinit(mrioc);
 	if (retval) {
@@ -4409,6 +4521,7 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
 {
 	u16 i;
 	struct mpi3mr_intr_info *intr_info;
+	struct diag_buffer_desc *diag_buffer;
 
 	mpi3mr_free_enclosure_list(mrioc);
 	mpi3mr_free_ioctl_dma_memory(mrioc);
@@ -4543,6 +4656,19 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
 		mrioc->pel_seqnum_virt = NULL;
 	}
 
+	for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
+		diag_buffer = &mrioc->diag_buffers[i];
+		if (diag_buffer->addr) {
+			dma_free_coherent(&mrioc->pdev->dev,
+			    diag_buffer->size, diag_buffer->addr,
+			    diag_buffer->dma_addr);
+			diag_buffer->addr = NULL;
+			diag_buffer->size = 0;
+			diag_buffer->type = 0;
+			diag_buffer->status = 0;
+		}
+	}
+
 	kfree(mrioc->throttle_groups);
 	mrioc->throttle_groups = NULL;
 
@@ -5016,6 +5142,9 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
 	if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) &&
 	    (reset_reason != MPI3MR_RESET_FROM_FIRMWARE) &&
 	    (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) {
+		dprint_reset(mrioc,
+		    "soft_reset_handler: releasing host diagnostic buffers\n");
+		mpi3mr_release_diag_bufs(mrioc, 0);
 		for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
 			mrioc->event_masks[i] = -1;
 
@@ -5075,6 +5204,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
 		mrioc->prepare_for_reset_timeout_counter = 0;
 	}
 	mpi3mr_memset_buffers(mrioc);
+	mpi3mr_release_diag_bufs(mrioc, 1);
 	retval = mpi3mr_reinit_ioc(mrioc, 0);
 	if (retval) {
 		pr_err(IOCNAME "reinit after soft reset failed: reason %d\n",
@@ -5954,3 +6084,64 @@ int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
 out_failed:
 	return -1;
 }
+
+/**
+ * mpi3mr_cfg_get_driver_pg2 - Read current driver page2
+ * @mrioc: Adapter instance reference
+ * @driver_pg2: Pointer to return driver page 2
+ * @pg_sz: Size of the memory allocated to the page pointer
+ * @page_action: Page action
+ *
+ * This is handler for config page read for the driver page2.
+ * This routine checks ioc_status to decide whether the page
+ * read is success or not.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc,
+	struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_action)
+{
+	struct mpi3_config_page_header cfg_hdr;
+	struct mpi3_config_request cfg_req;
+	u16 ioc_status = 0;
+
+	memset(driver_pg2, 0, pg_sz);
+	memset(&cfg_hdr, 0, sizeof(cfg_hdr));
+	memset(&cfg_req, 0, sizeof(cfg_req));
+
+	cfg_req.function = MPI3_FUNCTION_CONFIG;
+	cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
+	cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER;
+	cfg_req.page_number = 2;
+	cfg_req.page_address = 0;
+	cfg_req.page_version = MPI3_DRIVER2_PAGEVERSION;
+
+	if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
+	    MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
+		ioc_err(mrioc, "driver page2 header read failed\n");
+		goto out_failed;
+	}
+	if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+		ioc_err(mrioc, "driver page2 header read failed with\n"
+			       "ioc_status(0x%04x)\n",
+		    ioc_status);
+		goto out_failed;
+	}
+	cfg_req.action = page_action;
+
+	if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
+	    MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg2, pg_sz)) {
+		ioc_err(mrioc, "driver page2 read failed\n");
+		goto out_failed;
+	}
+	if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+		ioc_err(mrioc, "driver page2 read failed with\n"
+			       "ioc_status(0x%04x)\n",
+		    ioc_status);
+		goto out_failed;
+	}
+	return 0;
+out_failed:
+	return -1;
+}
+
-- 
2.31.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux