RE: [PATCH 4/8] scsi: ufs: Make .get_hba_mac() optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bart,

> UFSHCI controllers that are compliant with the UFSHCI 4.0 standard report
> the maximum number of supported commands in the controller capabilities
> register. Use that value if .get_hba_mac == NULL.
> 
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> ---
> drivers/ufs/core/ufs-mcq.c 12 +++++++-----
> include/ufs/ufshcd.h        4 +++-
> include/ufs/ufshci.h        2 +-
> 3 files changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index 0482c7a1e419..d6f966f4abef 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -138,7 +138,6 @@ EXPORT_SYMBOL_GPL(ufshcd_mcq_queue_cfg_addr);
>   *
>   * MAC - Max. Active Command of the Host Controller (HC)
>   * HC wouldn't send more than this commands to the device.
> - * It is mandatory to implement get_hba_mac() to enable MCQ mode.
>   * Calculates and adjusts the queue depth based on the depth
>   * supported by the HC and ufs device.
>   */
> @@ -146,10 +145,13 @@ int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba)
> {
>          int mac = -EOPNOTSUPP;
This initialization can be removed.

> 
> -        if (!hba->vops !hba->vops->get_hba_mac)
> -                goto err;
> -
> -        mac = hba->vops->get_hba_mac(hba);
> +        if (!hba->vops !hba->vops->get_hba_mac) {
> +                hba->capabilities =
> +                        ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
> +                mac = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
> +        } else {
> +                mac = hba->vops->get_hba_mac(hba);
> +        }
>          if (mac < 0)
>                  goto err;
> 
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index d4d63507d090..d32637d267f3 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -325,7 +325,9 @@ struct ufs_pwr_mode_info {
>   * @event_notify: called to notify important events
>   * @reinit_notify: called to notify reinit of UFSHCD during max gear switch
>   * @mcq_config_resource: called to configure MCQ platform resources
> - * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode
> + * @get_hba_mac: reports maximum number of outstanding commands supported by
> + *        the controller. Should be implemented for UFSHCI 4.0 or later
> + *        controllers that are not compliant with the UFSHCI 4.0 specification.
>   * @op_runtime_config: called to config Operation and runtime regs Pointers
>   * @get_outstanding_cqs: called to get outstanding completion queues
>   * @config_esi: called to config Event Specific Interrupt
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index c50f92bf2e1d..899077bba2d2 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -67,7 +67,7 @@ enum {
> 
> /* Controller capability masks */
> enum {
> -        MASK_TRANSFER_REQUESTS_SLOTS                = 0x0000001F,
> +        MASK_TRANSFER_REQUESTS_SLOTS                = 0x000000FF,
>          MASK_NUMBER_OUTSTANDING_RTT                = 0x0000FF00,
>          MASK_TASK_MANAGEMENT_REQUEST_SLOTS        = 0x00070000,
>          MASK_EHSLUTRD_SUPPORTED                        = 0x00400000,

Reviewed-by: Daejun Park <daejun7.park@xxxxxxxxxxx>

Thanks,
Daejun





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux