Re: [PATCH v9 11/19] scsi: sd: Translate data lifetime information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/11/24 2:21 PM, Christian Heusel wrote:
On 24/06/11 11:57PM, Andy Shevchenko wrote:
Tue, Jan 30, 2024 at 01:48:37PM -0800, Bart Van Assche kirjoitti:
Recently T10 standardized SBC constrained streams. This mechanism allows
to pass data lifetime information to SCSI devices in the group number
field. Add support for translating write hint information into a
permanent stream number in the sd driver. Use WRITE(10) instead of
WRITE(6) if data lifetime information is present because the WRITE(6)
command does not have a GROUP NUMBER field.

This patch broke very badly my connected Garmin FR35 sport watch. The boot time
increased by 1 minute along with broken access to USB mass storage.

On the reboot it takes ages as well.

Revert of this and one little dependency (unrelated by functional means) helps.

We have tested that the revert fixes the issue on top of v6.10-rc3.

Also adding the regressions list in CC and making regzbot aware of this
issue.

Details are here: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/60

P.S. Big thanks to Arch Linux team to help with bisection!

If this is fixed adding in a "Reported-by" or "Bisected-by" (depending
on what this subsystem uses) for me would be appreciated :)

Thank you Christian for having gone through the painful process of
bisecting this issue.

Is the Garmin FR35 Flash device perhaps connected to a USB bus? If so,
this is the second report of a USB storage device that resets if it
receives a query for the IO Advice Hints Grouping mode page. Does the
patch below help?

Thanks,

Bart.


diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3a43e2209751..fcf3d7730466 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -63,6 +63,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_device.h>
+#include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_driver.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_host.h>
@@ -3117,6 +3118,9 @@ static void sd_read_io_hints(struct scsi_disk *sdkp, unsigned char *buffer)
 	struct scsi_mode_data data;
 	int res;

+	if (sdp->sdev_bflags & BLIST_SKIP_IO_HINTS)
+		return;
+
 	res = scsi_mode_sense(sdp, /*dbd=*/0x8, /*modepage=*/0x0a,
 			      /*subpage=*/0x05, buffer, SD_BUF_SIZE, SD_TIMEOUT,
 			      sdkp->max_retries, &data, &sshdr);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index b31464740f6c..9a7185c68872 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -79,6 +79,8 @@ static int slave_alloc (struct scsi_device *sdev)
 	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
 		sdev->sdev_bflags |= BLIST_FORCELUN;

+	sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS;
+
 	return 0;
 }

diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index 6b548dc2c496..fa8721e49dec 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -69,8 +69,10 @@
 #define BLIST_RETRY_ITF		((__force blist_flags_t)(1ULL << 32))
 /* Always retry ABORTED_COMMAND with ASC 0xc1 */
 #define BLIST_RETRY_ASC_C1	((__force blist_flags_t)(1ULL << 33))
+/* Do not read the I/O hints mode page */
+#define BLIST_SKIP_IO_HINTS	((__force blist_flags_t)(1ULL << 34))

-#define __BLIST_LAST_USED BLIST_RETRY_ASC_C1
+#define __BLIST_LAST_USED BLIST_SKIP_IO_HINTS

 #define __BLIST_HIGH_UNUSED (~(__BLIST_LAST_USED | \
 			       (__force blist_flags_t) \




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux