Currently, the testbus configuration is written and completed with an
mb().
mb() ensure that the write completes, but completion doesn't mean
that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to
this endpoint (which readl()/writel() guarantees already). For that
reason the mb() can be dropped altogether without anything forcing
completion.
Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---
drivers/ufs/host/ufs-qcom.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 804dc8153e7b..649fada24345 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1445,11 +1445,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
(u32)host->testbus.select_minor << offset,
reg);
ufs_qcom_enable_test_bus(host);
- /*
- * Make sure the test bus configuration is
- * committed before returning.
- */
- mb();
return 0;
}
--
2.44.0
