The patch series introduces zone write plugging (ZWP) as the new
mechanism to control the ordering of writes to zoned block devices.
ZWP replaces zone write locking (ZWL) which is implemented only by
mq-deadline today. ZWP also allows emulating zone append operations
using regular writes for zoned devices that do not natively support this
operation (e.g. SMR HDDs). This patch series removes the scsi disk
driver and device mapper zone append emulation to use ZWP emulation.
Unlike ZWL which operates on requests, ZWP operates on BIOs. A zone
write plug is simply a BIO list that is atomically manipulated using a
spinlock and a kblockd submission work. A write BIO to a zone is
"plugged" to delay its execution if a write BIO for the same zone was
already issued, that is, if a write request for the same zone is being
executed. The next plugged BIO is unplugged and issued once the write
request completes.
This mechanism allows to:
- Untangle zone write ordering from the block IO schedulers. This
allows removing the restriction on using only mq-deadline for zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
do not prevent other BIOs from being submitted to the device (reads
or writes to other zones). Depending on the workload, this can
significantly improve the device use and the performance.
- Both blk-mq (request) based zoned devices and BIO-based devices (e.g.
device mapper) can use ZWP. It is mandatory for the
former but optional for the latter: BIO-based driver can use zone
write plugging to implement write ordering guarantees, or the drivers
can implement their own if needed.
- The code is less invasive in the block layer and in device drivers.
ZWP implementation is mostly limited to blk-zoned.c, with some small
changes in blk-mq.c, blk-merge.c and bio.c.
Performance evaluation results are shown below.
The series is based on 6.9.0-rc1 and organized as follows:
- Patch 1 to 6 are preparatory changes for patch 7.
- Patch 7, 8 and 9 introduce ZWP
- Patch 10 and 11 add zone append emulation to ZWP.
- Patch 12 to 19 modify zoned block device drivers to use ZWP and
prepare for the removal of ZWL.
- Patch 20 to 28 remove zone write locking
Overall, these changes do not significantly increase the amount of code
(the higher number of addition shown by diff-stat is in fact due to a
larger amount of comments in the code).
Many thanks must go to Christoph Hellwig for comments and suggestions
he provided on earlier versions of these patches.
Performance evaluation results
==============================
Environments:
- Intel Xeon 16-cores/32-threads, 128GB of RAM
- Kernel:
- ZWL (baseline): 6.9.0-rc1
- ZWP: 6.9.0-rc1 patched kernel to add zone write plugging
(both kernels were compiled with the same configuration turning off
most heavy debug features)
Workoads:
- seqw4K1: 4KB sequential write, qd=1
- seqw4K16: 4KB sequential write, qd=16
- seqw1M16: 1MB sequential write, qd=16
- rndw4K16: 4KB random write, qd=16
- rndw128K16: 128KB random write, qd=16
- btrfs workoad: Single fio job writing 128 MB files using 128 KB
direct IOs at qd=16.
Devices:
- nullblk (zoned): 4096 zones of 256 MB, 128 max open zones.
- NVMe ZNS drive: 1 TB ZNS drive with 2GB zone size, 14 max open and
active zones.
- SMR HDD: 20 TB disk with 256MB zone size, 128 max open zones.
For ZWP, the result show the performance percentage increase (or
decrease) against ZWL (baseline) case.
1) null_blk zoned device:
+--------+--------+-------+--------+---------+---------+
|seqw4K1 |seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
|(MB/s) | (MB/s) |(MB/s) | (MB/s) | (KIOPS)| (KIOPS) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWL | 961 | 835 | 18640 | 14480 | 415 | 167 |
|mq-deadline| | | | | | |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 963 | 845 | 18640 | 14630 | 452 | 165 |
|mq-deadline| (+0%) | (+1%) | (+0%) | (+1%) | (+8%) | (-1%) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 731 | 651 | 15780 | 12710 | 129 | 108 |
| bfq | (-23%) | (-22%) | (-15%)| (-12%) | (-68%) | (-15%) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 2511 | 1632 | 27470 | 19340 | 336 | 150 |
| none | (+161%)| (+95%) | (+47%)| (+33%) | (-19%) | (-19%) |
+-----------+--------+--------+-------+--------+--------+----------+
ZWP with mq-deadline gives performance very similar to zone write
locking, showing that zone write plugging overhead is acceptable.
But ZWP ability to run fast block devices with the none scheduler
shows brings all the benefits of zone write plugging and results in
significant performance increase for all workloads. The exception to
this are random write workloads with multiple jobs: for these, the
faster request submission rate achieved by zone write plugging results
in higher contention on null-blk zone spinlock, which degrades
performance.
2) NVMe ZNS drive:
+--------+--------+-------+--------+--------+----------+
|seqw4K1 |seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
|(MB/s) | (MB/s) |(MB/s) | (MB/s) | (KIOPS)| (KIOPS) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWL | 183 | 707 | 1083 | 1101 | 53.6 | 14.1 |
|mq-deadline| | | | | | |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 183 | 719 | 1082 | 1103 |55.5 | 14.1 |
|mq-deadline|(-0%) | (+1%) | (+0%) | (+0%) |(+3%) | (+0%) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 175 | 691 | 1078 | 1097 | 28.3 | 11.2 |
| bfq | (-4%) | (-2%) | (-0%) | (-0%) | (-47%) | (-20%) |
+-----------+--------+--------+-------+--------+--------+----------+
| ZWP | 190 | 665 | 1083 | 1105 | 51.4 | 14.1 |
| none | (+4%) | (-5%) | (+0%) | (+0%) | (-4%) | (+0%) |
+-----------+--------+--------+-------+--------+--------+----------+
Zone write plugging overhead does not significantly impact performance.
Similar to nullblk, using the none scheduler leads to performance
increase for most workloads.
3) SMR SATA HDD:
+-------+--------+-------+--------+--------+----------+
|seqw4K1|seqw4K16|seqw1M1|seqw1M16|rndw4K16|rndw128K16|
|(MB/s) | (MB/s) |(MB/s) | (MB/s) | (KIOPS)| (KIOPS) |
+-----------+-------+--------+-------+--------+--------+----------+
| ZWL | 107 | 243 | 246 | 246 | 2.2 | 0.769 |
|mq-deadline| | | | | | |
+-----------+-------+--------+-------+--------+--------+----------+
| ZWP | 107 | 240 | 245 | 242 | 2.2 | 0.767 |
|mq-deadline|(-0%) | (-1%) | (-0%) | (-1%) | (+0%) | (+0%) |
+-----------+-------+--------+-------+--------+--------+----------+
| ZWP | 104 | 240 | 245 | 243 | 2.3 | 0.765 |
| bfq | (-2%) | (-1%) | (-0%) | (-1%) | (+0%) | (+0%) |
+-----------+-------+--------+-------+--------+--------+----------+
| ZWP | 113 | 230 | 246 | 242 | 2.2 | 0.771 |
| none | (+5%) | (-5%) | (+0%) | (-1%) | (+0%) | (+0%) |
+-----------+-------+--------+-------+--------+--------+----------+
Performance with purely sequential write workloads at high queue depth
somewhat decrease a little when using zone write plugging. This is due
to the different IO pattern that ZWP generates where the first writes to
a zone start being issued when the end of the previous zone are still
being written. Depending on how the disk handles queued commands, seek
may be generated, slightly impacting the throughput achieved. Such pure
sequential write workloads are however rare with SMR drives.
4) Zone append tests using btrfs:
+-------------+-------------+-----------+-------------+
| null-blk | null_blk | ZNS | SMR |
| native ZA | emulated ZA | native ZA | emulated ZA |
| (MB/s) | (MB/s) | (MB/s) | (MB/s) |
+-----------+-------------+-------------+-----------+-------------+
| ZWL | 2434 | N/A | 1083 | 244 |
|mq-deadline| | | | |
+-----------+-------------+-------------+-----------+-------------+
| ZWP | 2361 | 3111 | 1087 | 237 |
|mq-deadline| (+1%) | | (+0%) | (-2%) |
+-----------+-------------+-------------+-----------+-------------+
| ZWP | 2299 | 2840 | 1082 | 239 |
| bfq | (-4%) | | (+0%) | (-2%) |
+-----------+-------------+-------------+-----------+-------------+
| ZWP | 2443 | 3152 | 1078 | 238 |
| none | (+0%) | | (-0%) | (-2%) |
+-----------+-------------+-------------+-----------+-------------+
With a more realistic use of the device though a file system, ZWP does
not introduce significant performance differences, except for SMR for
the same reason as with the fio sequential workloads at high queue
depth.
Changes from v1:
- Added patch 6
- Rewrite of patch 7 to use a hash table of dynamically allocated zone
write plugs. This results in changes in patch 11 and the addition of
patch 8 and 9.
- Rebased everything on 6.9.0-rc1
- Added review tags for patches that did not change
Damien Le Moal (28):
block: Restore sector of flush requests
block: Remove req_bio_endio()
block: Introduce blk_zone_update_request_bio()
block: Introduce bio_straddle_zones() and bio_offset_from_zone_start()
block: Allow using bio_attempt_back_merge() internally
block: Remember zone capacity when revalidating zones
block: Introduce zone write plugging
block: Use a mempool to allocate zone write plugs
block: Fake max open zones limit when there is no limit
block: Allow zero value of max_zone_append_sectors queue limit
block: Implement zone append emulation
block: Allow BIO-based drivers to use blk_revalidate_disk_zones()
dm: Use the block layer zone append emulation
scsi: sd: Use the block layer zone append emulation
ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
null_blk: Introduce zone_append_max_sectors attribute
null_blk: Introduce fua attribute
nvmet: zns: Do not reference the gendisk conv_zones_bitmap
block: Remove BLK_STS_ZONE_RESOURCE
block: Simplify blk_revalidate_disk_zones() interface
block: mq-deadline: Remove support for zone write locking
block: Remove elevator required features
block: Do not check zone type in blk_check_zone_append()
block: Move zone related debugfs attribute to blk-zoned.c
block: Remove zone write locking
block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED
block: Do not special-case plugging of zone write operations
block/Kconfig | 5 -
block/Makefile | 1 -
block/bio.c | 7 +
block/blk-core.c | 13 +-
block/blk-flush.c | 1 +
block/blk-merge.c | 22 +-
block/blk-mq-debugfs-zoned.c | 22 -
block/blk-mq-debugfs.c | 3 +-
block/blk-mq-debugfs.h | 6 +-
block/blk-mq.c | 144 ++--
block/blk-mq.h | 31 -
block/blk-settings.c | 46 +-
block/blk-sysfs.c | 2 +-
block/blk-zoned.c | 1262 +++++++++++++++++++++++++++--
block/blk.h | 73 +-
block/elevator.c | 46 +-
block/elevator.h | 1 -
block/genhd.c | 3 +-
block/mq-deadline.c | 176 +---
drivers/block/null_blk/main.c | 24 +-
drivers/block/null_blk/null_blk.h | 2 +
drivers/block/null_blk/zoned.c | 23 +-
drivers/block/ublk_drv.c | 5 +-
drivers/block/virtio_blk.c | 2 +-
drivers/md/dm-core.h | 2 +-
drivers/md/dm-zone.c | 476 +----------
drivers/md/dm.c | 75 +-
drivers/md/dm.h | 4 +-
drivers/nvme/host/core.c | 2 +-
drivers/nvme/target/zns.c | 10 +-
drivers/scsi/scsi_lib.c | 1 -
drivers/scsi/sd.c | 8 -
drivers/scsi/sd.h | 19 -
drivers/scsi/sd_zbc.c | 335 +-------
include/linux/blk-mq.h | 85 +-
include/linux/blk_types.h | 30 +-
include/linux/blkdev.h | 106 ++-
37 files changed, 1607 insertions(+), 1466 deletions(-)
delete mode 100644 block/blk-mq-debugfs-zoned.c
--
2.44.0
