Switch to the ->device_configure method instead of ->slave_configure
and update the block limits on the passed in queue_limits instead
of using the per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
drivers/ata/pata_macio.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 4ac854f6b05777..f046bfa5c6e7f6 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -796,7 +796,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
/* Hook the standard slave config to fixup some HW related alignment
* restrictions
*/
-static int pata_macio_slave_config(struct scsi_device *sdev)
+static int pata_macio_device_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct pata_macio_priv *priv = ap->private_data;
@@ -814,7 +815,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
/* OHare has issues with non cache aligned DMA on some chipsets */
if (priv->kind == controller_ohare) {
- blk_queue_update_dma_alignment(sdev->request_queue, 31);
+ lim->dma_alignment = 31;
blk_queue_update_dma_pad(sdev->request_queue, 31);
/* Tell the world about it */
@@ -829,7 +830,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
/* Shasta and K2 seem to have "issues" with reads ... */
if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
/* Allright these are bad, apply restrictions */
- blk_queue_update_dma_alignment(sdev->request_queue, 15);
+ lim->dma_alignment = 15;
blk_queue_update_dma_pad(sdev->request_queue, 15);
/* We enable MWI and hack cache line size directly here, this
@@ -918,7 +919,7 @@ static const struct scsi_host_template pata_macio_sht = {
* use 64K minus 256
*/
.max_segment_size = MAX_DBDMA_SEG,
- .slave_configure = pata_macio_slave_config,
+ .device_configure = pata_macio_device_configure,
.sdev_groups = ata_common_sdev_groups,
.can_queue = ATA_DEF_QUEUE,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
--
2.39.2
