James Bottomley wrote:
On Fri, 2007-09-21 at 05:48 -0400, Jeff Garzik wrote:
commit a6d5ac6a3a1cfbed2a045928bbadd5285f1df084
Author: Jeff Garzik <jeff@xxxxxxxxxx>
Date: Fri Sep 21 05:07:19 2007 -0400
[libata] SCSI: support INQUIRY page 89h (ATA info page)
Signed-off-by: Jeff Garzik <jeff@xxxxxxxxxx>
drivers/ata/libata-scsi.c | 82 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 78 insertions(+), 4 deletions(-)
a6d5ac6a3a1cfbed2a045928bbadd5285f1df084
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7ad046b..bb5a5c1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1804,6 +1804,71 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
}
/**
+ * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ * @buflen: Response buffer length.
+ *
+ * Yields SAT-specified ATA VPD page.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf,
+ unsigned int buflen)
+{
+ struct ata_device *dev = args->dev;
+ u8 pbuf[60];
+ bool is_atapi = (dev->class == ATA_DEV_ATAPI);
I thought this was only used in the dev->class == ATA_DEV_ATA leg of the
ata_scsi_queuecommand(), so isn't this always false?
Now I remember why this is here -- SAT specifies providing this page
even for ATAPI devices (optional). If the SATL chooses to do so, the
obvious fallout ensues: snooping and modifying the list of supported
VPD pages, etc.
That's too cumbersome IMO, so I'm just going to do it for ATA.
So, same end result as with my previous response (atapi checks go away),
but this was some additional info.
+ struct ata_taskfile tf;
+ unsigned int i;
+
+ if (!buflen)
+ return 0;
+
+ memset(&pbuf, 0, sizeof(pbuf));
+ memset(&tf, 0, sizeof(tf));
+
+ if (is_atapi)
+ pbuf[0] = 0x5; /* FIXME: hardcodes MMC */
Actually, in MMC implementation of INQUIRY per SPC-3 (or earlier if MMC
< 5) is mandatory. The problem cases I can see are non-standard ATAPI
devices (probably scanners).
To be more clear: pbuf[0] is peripheral device type. ATAPI devices are
not limited to device type == 5 (MMC), hence the 'FIXME'. Tape devices
are a different device type, for example.
libata treats ATAPI as a pass-through bridge to a conforming SCSI device
of /any/ type. There are actually some ATAPI bridges which plug into
any SCSI-2 device, those these are quite rare in practice.
libata only provides a single modification to any SCSI command passed to
an ATAPI device: INQUIRY is fixed up to report scsi-version==5, if
scsi-version==0 (see atapi_qc_complete).
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
