Re: [PATCH 2/2] scsi: target: iscsi: don't warn of R/W when no data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/7/23 11:42 AM, lduncan@xxxxxxxx wrote:
From: Lee Duncan <lduncan@xxxxxxxx>

The LIO target code has a warning about setting the
read and/or write header bits with a PDU that has zero
transfer length, even though the code mentions that the
SPEC (RFC 3720) allows this, and that some initiators
set these bits. But in practice such initiators end up
flooding the logs with thousands of warning messages for
IO that is allowed.


I've never seen us hit this. What initiator is doing this and what is the command they are sending?

Is it also related to the first patch? Is some initiator sending something like a TUR with the immediate bit set during some sort of stall/timeout?




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux