[PATCH AUTOSEL 6.7 13/23] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>

[ Upstream commit ee0017c3ed8a8abfa4d40e42f908fb38c31e7515 ]

If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@xxxxxxxxxxxx
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index a75f670bf5519..aa29e250cf15f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -7387,7 +7387,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 		return -EFAULT;
 	}
 
- issue_diag_reset:
+	return 0;
+
+issue_diag_reset:
 	rc = _base_diag_reset(ioc);
 	return rc;
 }
-- 
2.43.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux