From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
The server was crashing after LOGO because fcport was getting
freed twice.
-----------[ cut here ]-----------
kernel BUG at mm/slub.c:371!
invalid opcode: 0000 1 SMP PTI
CPU: 35 PID: 4610 Comm: bash Kdump: loaded Tainted: G OE --------- - - 4.18.0-425.3.1.el8.x86_64 #1
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
RIP: 0010:set_freepointer.part.57+0x0/0x10
RSP: 0018:ffffb07107027d90 EFLAGS: 00010246
RAX: ffff9cb7e3150000 RBX: ffff9cb7e332b9c0 RCX: ffff9cb7e3150400
RDX: 0000000000001f37 RSI: 0000000000000000 RDI: ffff9cb7c0005500
RBP: fffff693448c5400 R08: 0000000080000000 R09: 0000000000000009
R10: 0000000000000000 R11: 0000000000132af0 R12: ffff9cb7c0005500
R13: ffff9cb7e3150000 R14: ffffffffc06990e0 R15: ffff9cb7ea85ea58
FS: 00007ff6b79c2740(0000) GS:ffff9cb8f7ec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b426b7d700 CR3: 0000000169c18002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
kfree+0x238/0x250
qla2x00_els_dcmd_sp_free+0x20/0x230 [qla2xxx]
? qla24xx_els_dcmd_iocb+0x607/0x690 [qla2xxx]
qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx]
? qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx]
? kernfs_fop_write+0x11e/0x1a0
Remove one of the free call and add check for valid
fcport. Also use function qla2x00_free_fcport instead of kfree.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Saurav Kashyap <skashyap@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_iocb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 892a27afb462..0b41e8a06602 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2637,7 +2637,8 @@ static void qla2x00_els_dcmd_sp_free(srb_t *sp)
{
struct srb_iocb *elsio = &sp->u.iocb_cmd;
- kfree(sp->fcport);
+ if (sp->fcport)
+ qla2x00_free_fcport(sp->fcport);
if (elsio->u.els_logo.els_logo_pyld)
dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
@@ -2750,6 +2751,7 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *vha, int els_opcode,
if (!elsio->u.els_logo.els_logo_pyld) {
/* ref: INIT */
kref_put(&sp->cmd_kref, qla2x00_sp_release);
+ qla2x00_free_fcport(fcport);
return QLA_FUNCTION_FAILED;
}
@@ -2784,7 +2786,6 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *vha, int els_opcode,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
wait_for_completion(&elsio->u.els_logo.comp);
- qla2x00_free_fcport(fcport);
/* ref: INIT */
kref_put(&sp->cmd_kref, qla2x00_sp_release);
--
2.23.1
