Enable the UFS found on the SM7125 Xiaomi smartphones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: David Wronek <davidwronek@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
index e55cd83c19b8..0dfd1e3730e9 100644
--- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
@@ -152,6 +152,9 @@ vreg_l4a_0p88: ldo4 {
regulator-min-microvolt = <824000>;
regulator-max-microvolt = <928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a_2p7: ldo5 {
@@ -188,6 +191,9 @@ vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_1p8: ldo13 {
@@ -230,6 +236,9 @@ vreg_l19a_3p0: ldo19 {
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
@@ -258,6 +267,9 @@ vreg_l3c_1p23: ldo3 {
regulator-min-microvolt = <1144000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8: ldo4 {
@@ -398,6 +410,22 @@ sd-cd-pins {
};
};
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l19a_3p0>;
+ vcc-max-microamp = <600000>;
+ vccq2-supply = <&vreg_l12a_1p8>;
+ vccq2-max-microamp = <600000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a_0p88>;
+ vdda-pll-supply = <&vreg_l3c_1p23>;
+ vdda-phy-max-microamp = <62900>;
+ vdda-pll-max-microamp = <18300>;
+ status = "okay";
+};
+
&usb_1 {
qcom,select-utmi-as-pipe-clk;
status = "okay";
--
2.43.0
