On 9/14/07, Andy Whitcroft <apw@xxxxxxxxxxxx> wrote: > On Tue, Sep 11, 2007 at 04:31:12AM +0900, FUJITA Tomonori wrote: > [...] > > > > Even if we revert the qla1280 patch, scsi-ml still sends chaining sg > > list. So it doesn't work. > > > > The following patch disables chaining sg list for qla1280. If the fix > > that I've just sent doesn't work, please try this. > > Ok, the other patch _did_ work, but this got tested anyhow and it did > _not_ fix things. > Sorry to confirm this. My RAID5 got destroyed a second time. To summarize what worked / not worked / and seems to work for me: First 2 tries with unpatched rc4-mm1: Both times one sata_sil24-drive got kicked Then I switched back to rc3-mm1, 18 boots with that kernel worked. Then I tried the patched rc4-mm1 and it worked too. The next boot also worked, but the third time kicked a drive out again. But as nobody reads logs, I did not notice that and keep using the patched rc4-mm1. The next 5 times the system worked normally with the two remaining drives. The sixth boot kicked the second sata_sil24 drive. That I did notice... After reassembling the RAID, I'm now back to the patch rc4-mm1 that did boot correctly this time. So the patch just makes it unlikelier to hit the bug. Instead of failing 2 out of 2 times, it only failed 2 out of 8 times. I compared the rc4-mm1 boot from a working case and the case where it kicked the first drive. Nothing seems to stand out... < == good rc4-mm1 boot > == bad rc4-mm1 boot that kicked the drive 145c145 < CPU 0: aperture @ 4000000 size 32 MB --- > CPU 0: aperture @ b7f0000000 size 32 MB 154c154 < Calibrating delay using timer specific routine.. 5203.23 BogoMIPS (lpj=26016160) --- > Calibrating delay using timer specific routine.. 5203.22 BogoMIPS (lpj=26016138) 169c169 < APIC timer calibration result 12499998 --- > APIC timer calibration result 12499994 173c173 < Calibrating delay using timer specific routine.. 5222.40 BogoMIPS (lpj=26112010) --- > Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000052) 182c182 < Calibrating delay using timer specific routine.. 5222.73 BogoMIPS (lpj=26113694) --- > Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000081) 191c191 < Calibrating delay using timer specific routine.. 5223.07 BogoMIPS (lpj=26115369) --- > Calibrating delay using timer specific routine.. 5200.03 BogoMIPS (lpj=26000164) 269d268 < Switched to high resolution mode on CPU 3 270a270 > Switched to high resolution mode on CPU 3 502,509c502,509 < raid6: int64x1 2634 MB/s < raid6: int64x2 3244 MB/s < raid6: int64x4 3405 MB/s < raid6: int64x8 2614 MB/s < raid6: sse2x1 3607 MB/s < raid6: sse2x2 4834 MB/s < raid6: sse2x4 4946 MB/s < raid6: using algorithm sse2x4 (4946 MB/s) --- > raid6: int64x1 2680 MB/s > raid6: int64x2 3232 MB/s > raid6: int64x4 3411 MB/s > raid6: int64x8 2620 MB/s > raid6: sse2x1 3606 MB/s > raid6: sse2x2 4810 MB/s > raid6: sse2x4 4910 MB/s > raid6: using algorithm sse2x4 (4910 MB/s) 567c567 < md1: bitmap initialized from disk: read 10/10 pages, set 96 bits --- > md1: bitmap initialized from disk: read 10/10 pages, set 104 bits 568a569,655 > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2 > ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT > ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out > res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error) > ata1.00: status: {DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK > sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] > Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 00 00 00 af > sd 0:0:0:0: [sda] Add. Sense: No additional sense information > end_request: I/O error, dev sda, sector 625137161 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > md: super_written gets error=-5, uptodate=0 > raid5: Disk failure on sda2, disabling device. Operation continuing on 2 devices 571a659,663 > RAID5 conf printout: > --- rd:3 wd:2 > disk 0, o:0, dev:sda2 > disk 1, o:1, dev:sdb2 > disk 2, o:1, dev:sdc2 576a669,672 > RAID5 conf printout: > --- rd:3 wd:2 > disk 1, o:1, dev:sdb2 > disk 2, o:1, dev:sdc2 Another good boot also showed the aperture at a similar high address: CPU 0: aperture @ b7f2000000 size 32 MB And that good boot also showed the "correct" BogoMIPS: Calibrating delay using timer specific routine.. 5205.43 BogoMIPS (lpj=26027183) Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000052) Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000082) Calibrating delay using timer specific routine.. 5200.03 BogoMIPS (lpj=26000166) Anything more I can provide to help debugging this? Torsten - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html