From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
Add UFS host controller and PHY nodes for sc7280 IDP board.
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@ &uart5 {
status = "okay";
};
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l7b_2p9>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+ vccq2-supply = <&vreg_l9b_1p2>;
+ vccq2-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p8>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
};
--
2.43.0
