Re: [PATCH v6 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 30, 2023 at 04:14:25PM +0800, Can Guo wrote:
> 
> 
> On 11/30/2023 3:12 PM, Manivannan Sadhasivam wrote:
> > On Wed, Nov 29, 2023 at 12:28:33AM -0800, Can Guo wrote:
> > > On SM8550, two sets of UFS PHY settings are provided, one set is to support
> > > HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY
> > > settings are programming different values to different registers, mixing
> > > the two sets and/or overwriting one set with another set is definitely not
> > > blessed by UFS PHY designers.
> > > 
> > > To add HS-G5 support for SM8550, split the two sets of PHY settings into
> > > their dedicated overlay tables, only the common parts of the two sets of
> > > PHY settings are left in the .tbls.
> > > 
> > > Consider we are going to add even higher gear support in future, to avoid
> > > adding more tables with different names, rename the .tbls_hs_g4 and make it
> > > an array, a size of 2 is enough as of now.
> > > 
> > > In this case, .tbls alone is not a complete set of PHY settings, so either
> > > tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the
> > > .tbls to become a complete set of PHY settings.
> > > 
> > > Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
> > > ---
> > >   drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h     |   2 +
> > >   drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h |   2 +
> > >   .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h    |   9 ++
> > >   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            | 170 ++++++++++++++++++---
> > >   4 files changed, 163 insertions(+), 20 deletions(-)
> > > 
> > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> > > index c23d5e4..e563af5 100644
> > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> > > @@ -18,6 +18,7 @@
> > >   #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL		0x060
> > >   #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
> > >   #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0bc
> > > +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY	0x12c
> > >   #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL		0x158
> > >   #define QPHY_V6_PCS_UFS_LINECFG_DISABLE			0x17c
> > >   #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME		0x184
> > > @@ -27,5 +28,6 @@
> > >   #define QPHY_V6_PCS_UFS_READY_STATUS			0x1a8
> > >   #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1		0x1f4
> > >   #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1		0x1fc
> > > +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME		0x220
> > >   #endif
> > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> > > index f420f8f..ef392ce 100644
> > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> > > @@ -56,6 +56,8 @@
> > >   #define QSERDES_V6_COM_SYS_CLK_CTRL				0xe4
> > >   #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE			0xe8
> > >   #define QSERDES_V6_COM_PLL_IVCO					0xf4
> > > +#define QSERDES_V6_COM_CMN_IETRIM				0xfc
> > > +#define QSERDES_V6_COM_CMN_IPTRIM				0x100
> > >   #define QSERDES_V6_COM_SYSCLK_EN_SEL				0x110
> > >   #define QSERDES_V6_COM_RESETSM_CNTRL				0x118
> > >   #define QSERDES_V6_COM_LOCK_CMP_EN				0x120
> > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> > > index 674f158..48f31c8 100644
> > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> > > @@ -15,8 +15,15 @@
> > >   #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2		0x08
> > >   #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4		0x10
> > > +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4		0x24
> > > +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4	0x54
> > >   #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2			0xd4
> > > +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4			0xdc
> > > +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4			0xf0
> > > +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS			0xf4
> > >   #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL			0x178
> > > +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x1bc
> > > +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3			0x1c4
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0			0x208
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1			0x20c
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3			0x214
> > > @@ -28,6 +35,8 @@
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE3_B5				0x264
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE3_B8				0x270
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE4_B3				0x280
> > > +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4				0x284
> > >   #define QSERDES_UFS_V6_RX_MODE_RATE4_B6				0x28c
> > > +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL			0x2f8
> > >   #endif
> > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > index 2173418..7e5f1154 100644
> > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > @@ -41,6 +41,8 @@
> > >   #define PHY_INIT_COMPLETE_TIMEOUT		10000
> > > +#define NUM_OVERLAY				2
> > > +
> > >   struct qmp_phy_init_tbl {
> > >   	unsigned int offset;
> > >   	unsigned int val;
> > > @@ -754,15 +756,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
> > > -	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> > > -	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
> > > -	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
> > > +};
> > > +
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
> > > +};
> > > +
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = {
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
> > > @@ -771,19 +780,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
> > >   };
> > > -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
> > > -	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = {
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f),
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b),
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c),
> > > +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
> > >   };
> > >   static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
> > > +};
> > > +
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c),
> > >   };
> > >   static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> > > -	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
> > > @@ -799,16 +813,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
> > >   	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
> > >   };
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = {
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
> > > +};
> > > +
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = {
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff),
> > > +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30),
> > > +};
> > > +
> > >   static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> > > -	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> > > +};
> > > +
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = {
> > > +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
> > >   	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
> > >   };
> > > +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = {
> > > +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
> > > +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f),
> > > +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
> > > +};
> > > +
> > >   struct qmp_ufs_offsets {
> > >   	u16 serdes;
> > >   	u16 pcs;
> > > @@ -828,6 +871,8 @@ struct qmp_phy_cfg_tbls {
> > >   	int rx_num;
> > >   	const struct qmp_phy_init_tbl *pcs;
> > >   	int pcs_num;
> > > +	/* Maximum supported Gear of this tbls */
> > > +	u32 max_gear;
> > >   };
> > >   /* struct qmp_phy_cfg - per-PHY initialization config */
> > > @@ -835,13 +880,15 @@ struct qmp_phy_cfg {
> > >   	int lanes;
> > >   	const struct qmp_ufs_offsets *offsets;
> > > +	/* Maximum supported Gear of this config */
> > > +	u32 max_supported_gear;
> > >   	/* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
> > >   	const struct qmp_phy_cfg_tbls tbls;
> > >   	/* Additional sequence for HS Series B */
> > >   	const struct qmp_phy_cfg_tbls tbls_hs_b;
> > > -	/* Additional sequence for HS G4 */
> > > -	const struct qmp_phy_cfg_tbls tbls_hs_g4;
> > > +	/* Additional sequence for different HS Gears */
> > > +	const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY];
> > >   	/* clock ids to be requested */
> > >   	const char * const *clk_list;
> > > @@ -944,6 +991,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
> > >   	.lanes			= 1,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G3,
> > >   	.tbls = {
> > >   		.serdes		= msm8996_ufsphy_serdes,
> > > @@ -969,6 +1017,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8350_ufsphy_serdes,
> > > @@ -984,13 +1033,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
> > >   		.serdes		= sm8350_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8350_ufsphy_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
> > >   		.rx		= sm8350_ufsphy_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
> > >   		.pcs		= sm8350_ufsphy_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sm8450_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> > > @@ -1003,6 +1053,7 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = {
> > >   	.lanes                  = 2,
> > >   	.offsets                = &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes         = sm8150_ufsphy_serdes,
> > > @@ -1018,13 +1069,14 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = {
> > >   		.serdes         = sm8150_ufsphy_hs_b_serdes,
> > >   		.serdes_num     = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx             = sm8250_ufsphy_hs_g4_tx,
> > >   		.tx_num         = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
> > >   		.rx             = sc7280_ufsphy_hs_g4_rx,
> > >   		.rx_num         = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx),
> > >   		.pcs            = sm8150_ufsphy_hs_g4_pcs,
> > >   		.pcs_num        = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list               = sm8450_ufs_phy_clk_l,
> > >   	.num_clks               = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> > > @@ -1037,6 +1089,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8350_ufsphy_serdes,
> > > @@ -1052,13 +1105,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
> > >   		.serdes		= sm8350_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8350_ufsphy_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
> > >   		.rx		= sm8350_ufsphy_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
> > >   		.pcs		= sm8350_ufsphy_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sdm845_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> > > @@ -1071,6 +1125,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G3,
> > >   	.tbls = {
> > >   		.serdes		= sdm845_ufsphy_serdes,
> > > @@ -1099,6 +1154,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> > >   	.lanes			= 1,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G3,
> > >   	.tbls = {
> > >   		.serdes		= sm6115_ufsphy_serdes,
> > > @@ -1127,6 +1183,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = {
> > >   	.lanes			= 1,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G3,
> > >   	.tbls = {
> > >   		.serdes		= sdm845_ufsphy_serdes,
> > > @@ -1155,6 +1212,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8150_ufsphy_serdes,
> > > @@ -1170,13 +1228,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> > >   		.serdes		= sm8150_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8150_ufsphy_hs_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx),
> > >   		.rx		= sm8150_ufsphy_hs_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx),
> > >   		.pcs		= sm8150_ufsphy_hs_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sdm845_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> > > @@ -1189,6 +1248,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8150_ufsphy_serdes,
> > > @@ -1204,13 +1264,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = {
> > >   		.serdes		= sm8150_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8250_ufsphy_hs_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
> > >   		.rx		= sm8250_ufsphy_hs_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx),
> > >   		.pcs		= sm8150_ufsphy_hs_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sdm845_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> > > @@ -1223,6 +1284,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8350_ufsphy_serdes,
> > > @@ -1238,13 +1300,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> > >   		.serdes		= sm8350_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8350_ufsphy_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
> > >   		.rx		= sm8350_ufsphy_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
> > >   		.pcs		= sm8350_ufsphy_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sdm845_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> > > @@ -1257,6 +1320,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets,
> > > +	.max_supported_gear	= UFS_HS_G4,
> > >   	.tbls = {
> > >   		.serdes		= sm8350_ufsphy_serdes,
> > > @@ -1272,13 +1336,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> > >   		.serdes		= sm8350_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> > >   	},
> > > -	.tbls_hs_g4 = {
> > > +	.tbls_hs_overlay[0] = {
> > >   		.tx		= sm8350_ufsphy_g4_tx,
> > >   		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
> > >   		.rx		= sm8350_ufsphy_g4_rx,
> > >   		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
> > >   		.pcs		= sm8350_ufsphy_g4_pcs,
> > >   		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > >   	},
> > >   	.clk_list		= sm8450_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> > > @@ -1291,6 +1356,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
> > >   	.lanes			= 2,
> > >   	.offsets		= &qmp_ufs_offsets_v6,
> > > +	.max_supported_gear	= UFS_HS_G5,
> > >   	.tbls = {
> > >   		.serdes		= sm8550_ufsphy_serdes,
> > > @@ -1306,6 +1372,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
> > >   		.serdes		= sm8550_ufsphy_hs_b_serdes,
> > >   		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
> > >   	},
> > > +	.tbls_hs_overlay[0] = {
> > > +		.serdes		= sm8550_ufsphy_g4_serdes,
> > > +		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_g4_serdes),
> > > +		.tx		= sm8550_ufsphy_g4_tx,
> > > +		.tx_num		= ARRAY_SIZE(sm8550_ufsphy_g4_tx),
> > > +		.rx		= sm8550_ufsphy_g4_rx,
> > > +		.rx_num		= ARRAY_SIZE(sm8550_ufsphy_g4_rx),
> > > +		.pcs		= sm8550_ufsphy_g4_pcs,
> > > +		.pcs_num	= ARRAY_SIZE(sm8550_ufsphy_g4_pcs),
> > > +		.max_gear	= UFS_HS_G4,
> > > +	},
> > > +	.tbls_hs_overlay[1] = {
> > > +		.serdes		= sm8550_ufsphy_g5_serdes,
> > > +		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_g5_serdes),
> > > +		.rx		= sm8550_ufsphy_g5_rx,
> > > +		.rx_num		= ARRAY_SIZE(sm8550_ufsphy_g5_rx),
> > > +		.pcs		= sm8550_ufsphy_g5_pcs,
> > > +		.pcs_num	= ARRAY_SIZE(sm8550_ufsphy_g5_pcs),
> > > +		.max_gear	= UFS_HS_G5,
> > > +	},
> > >   	.clk_list		= sdm845_ufs_phy_clk_l,
> > >   	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> > >   	.vreg_list		= qmp_phy_vreg_l,
> > > @@ -1368,17 +1454,55 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls
> > >   	qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num);
> > >   }
> > > +static int qmp_ufs_get_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg)
> > > +{
> > > +	u32 max_gear, floor_max_gear = cfg->max_supported_gear;
> > > +	int i = NUM_OVERLAY - 1;
> > 
> > Just use i directly in the for loop. Also, please rename "i" with "idx" to make
> > it clear.
> 
> OK
> 
> > 
> > > +	int ret = -EINVAL;
> > > +
> > > +	for (; i >= 0; i --) {
> > 
> > i--
> > 
> > > +		max_gear = cfg->tbls_hs_overlay[i].max_gear;
> > > +
> > > +		if (max_gear == 0)
> > > +			continue;
> > 
> > You are setting max_gear even for targets with a single overlay. How can this
> > become 0?
> 
> Say 8550 has two overlays, 8450 has one overlay. We are sweeping all
> overlays as NUM_OVERLAY == 2, so for 8450, there is one overlay initialized,
> another one not initialized (max_gear == 0), we are skipping the one which
> is not initialized.
> 

This is confusing at its best :) Please check for the existence of the actual
table instead. Like,

	for (idx = NUM_OVERLAY - 1; i >= 0, i--) {

		/* Skip if the table is not available */
		if (!cfg->tbls_hs_overlay[i].serdes)
			continue;

		...
	}

> > 
> > > +
> > > +		/* Direct matching, bail */
> > > +		if (qmp->submode == max_gear)
> > > +			return i;
> > > +
> > > +		/* If no direct matching, the lowest gear is the best matching */
> > > +		if (max_gear < floor_max_gear) {
> > > +			ret = i;
> > > +			floor_max_gear = max_gear;
> > > +		}
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > > +
> > >   static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg)
> > >   {
> > > +	int i;
> > > +	bool apply_overlay = false;
> > > +
> > > +	i = qmp_ufs_get_gear_overlay(qmp, cfg);
> > > +	if (i >= 0)
> > > +		apply_overlay = true;
> > 
> > How about?
> > 
> > ```
> > 	int idx;
> > 
> > 	idx = qmp_ufs_get_gear_overlay(qmp, cfg);
> > 
> > 	qmp_ufs_serdes_init(qmp, &cfg->tbls);
> > 	qmp_ufs_lanes_init(qmp, &cfg->tbls);
> > 	...
> > 
> > 	if (idx >= 0) {
> > 		qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[idx]);
> > 		qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[idx]);
> > 		...
> > 	}
> > ```
> > 
> > Since the ordering doesn't matter for init sequence, you can program the overlay
> > tables under a single condition.
> 
> We can do that, but we need to be careful. When I say (in my previous reply)
> the ordering does not matter, that saying is from the UFS PHY HPG doc.
> However, in SW implementation, the 'tbls_hs_b' is actually overwriting one
> COM_VCO_TUNE_MAP register, the same register is also programmed by common
> table or overlay table. So qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b) should
> come after overlays.
> 

Then you can program tbls_hs_b after overlay tables. Wouldn't that work?

- Mani

> Thanks,
> Can Guo.
> 
> > 
> > - Mani
> > 

-- 
மணிவண்ணன் சதாசிவம்




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux