On Wed, Nov 29, 2023 at 12:28:34AM -0800, Can Guo wrote:
> In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext()
> and stop proceeding if phy_set_mode_ext() fails.
>
> Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
> ---
> drivers/ufs/host/ufs-qcom.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 30f4ca6..9c0ebbc 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -475,7 +475,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> return ret;
> }
>
> - phy_set_mode_ext(phy, mode, host->phy_gear);
> + ret = phy_set_mode_ext(phy, mode, host->phy_gear);
> + if (ret) {
> + dev_err(hba->dev, "%s: phy set mode failed, ret = %d\n",
> + __func__, ret);
No need to print the error message here as it is already done in the PHY driver.
Also, this patch should come before the PHY patch returning error.
- Mani
> + goto out_disable_phy;
> + }
>
> /* power on phy - start serdes and phy's power and clocks */
> ret = phy_power_on(phy);
> --
> 2.7.4
>
>
--
மணிவண்ணன் சதாசிவம்
