Re: [PATCH v15 01/19] block: Introduce more member variables related to zone write locking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/15/23 06:16, Bart Van Assche wrote:
> Many but not all storage controllers require serialization of zoned writes.
> Introduce two new request queue limit member variables related to write
> serialization. 'driver_preserves_write_order' allows block drivers to
> indicate that the order of write commands is preserved and hence that
> serialization of writes per zone is not required. 'use_zone_write_lock' is
> set by disk_set_zoned() if and only if the block device has zones and if
> the block driver does not preserve the order of write requests.
> 
> Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> Reviewed-by: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
> Cc: Christoph Hellwig <hch@xxxxxx>
> Cc: Ming Lei <ming.lei@xxxxxxxxxx>
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> ---
>  block/blk-settings.c   | 15 +++++++++++++++
>  block/blk-zoned.c      |  1 +
>  include/linux/blkdev.h | 10 ++++++++++
>  3 files changed, 26 insertions(+)
> 
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index 0046b447268f..4c776c08f190 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -56,6 +56,8 @@ void blk_set_default_limits(struct queue_limits *lim)
>  	lim->alignment_offset = 0;
>  	lim->io_opt = 0;
>  	lim->misaligned = 0;
> +	lim->driver_preserves_write_order = false;
> +	lim->use_zone_write_lock = false;
>  	lim->zoned = BLK_ZONED_NONE;
>  	lim->zone_write_granularity = 0;
>  	lim->dma_alignment = 511;
> @@ -82,6 +84,8 @@ void blk_set_stacking_limits(struct queue_limits *lim)
>  	lim->max_dev_sectors = UINT_MAX;
>  	lim->max_write_zeroes_sectors = UINT_MAX;
>  	lim->max_zone_append_sectors = UINT_MAX;
> +	/* Request-based stacking drivers do not reorder requests. */

Rereading this patch, I do not think this statement is correct. I seriously
doubt that multipath will preserve write command order in all cases...

> +	lim->driver_preserves_write_order = true;

... so it is likely much safer to set the default to "false" as that is the
default for all requests in general.

>  }
>  EXPORT_SYMBOL(blk_set_stacking_limits);
>  
> @@ -685,6 +689,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
>  						   b->max_secure_erase_sectors);
>  	t->zone_write_granularity = max(t->zone_write_granularity,
>  					b->zone_write_granularity);
> +	t->driver_preserves_write_order = t->driver_preserves_write_order &&
> +		b->driver_preserves_write_order;
> +	t->use_zone_write_lock = t->use_zone_write_lock ||
> +		b->use_zone_write_lock;

Very minor nit: splitting the line after the equal would make this more readable.

>  	t->zoned = max(t->zoned, b->zoned);
>  	return ret;
>  }
> @@ -949,6 +957,13 @@ void disk_set_zoned(struct gendisk *disk, enum blk_zoned_model model)
>  	}
>  
>  	q->limits.zoned = model;
> +	/*
> +	 * Use the zone write lock only for zoned block devices and only if
> +	 * the block driver does not preserve the order of write commands.
> +	 */
> +	q->limits.use_zone_write_lock = model != BLK_ZONED_NONE &&
> +		!q->limits.driver_preserves_write_order;
> +
>  	if (model != BLK_ZONED_NONE) {
>  		/*
>  		 * Set the zone write granularity to the device logical block
> diff --git a/block/blk-zoned.c b/block/blk-zoned.c
> index 619ee41a51cc..112620985bff 100644
> --- a/block/blk-zoned.c
> +++ b/block/blk-zoned.c
> @@ -631,6 +631,7 @@ void disk_clear_zone_settings(struct gendisk *disk)
>  	q->limits.chunk_sectors = 0;
>  	q->limits.zone_write_granularity = 0;
>  	q->limits.max_zone_append_sectors = 0;
> +	q->limits.use_zone_write_lock = false;
>  
>  	blk_mq_unfreeze_queue(q);
>  }
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 51fa7ffdee83..2d452f5a36c8 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -316,6 +316,16 @@ struct queue_limits {
>  	unsigned char		misaligned;
>  	unsigned char		discard_misaligned;
>  	unsigned char		raid_partial_stripes_expensive;
> +	/*
> +	 * Whether or not the block driver preserves the order of write
> +	 * requests. Set by the block driver.
> +	 */
> +	bool			driver_preserves_write_order;
> +	/*
> +	 * Whether or not zone write locking should be used. Set by
> +	 * disk_set_zoned().
> +	 */
> +	bool			use_zone_write_lock;
>  	enum blk_zoned_model	zoned;
>  
>  	/*

-- 
Damien Le Moal
Western Digital Research




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux