Re: [PATCH v12 06/20] scsi: Have scsi-ml retry sd_spinup_disk errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/11/2023 01:37, Mike Christie wrote:

Hi Mike,

This simplifies sd_spinup_disk so scsi-ml retries errors for it. Note that
we retried specifically on a UA and also if scsi_status_is_good returned
failed which would happen for all check conditions. In this patch we use
SCMD_FAILURE_STAT_ANY which will trigger for the same conditions as
when scsi_status_is_good returns false and there is status. This will
cover all CCs including UAs so there is no explicit failures arrary entry

/s/arrary/array/

for UAs.

But the first failure_defs member is for UNIT_ATTENTION, below, right?

Thanks,
John


There is one behavior change where we no longer retry when
scsi_execute_cmd returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there
are no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern we use GFP_NOIO, so retrying
will probably not help.

We do not handle the outside loop's retries because we want to sleep
between tries and we don't support that yet.

Signed-off-by: Mike Christie<michael.christie@xxxxxxxxxx>
---
  drivers/scsi/sd.c | 77 +++++++++++++++++++++++++++--------------------
  1 file changed, 45 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 641f9c9c0674..cda0d029ab7f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2235,55 +2235,68 @@ static int sd_done(struct scsi_cmnd *SCpnt)
  static void
  sd_spinup_disk(struct scsi_disk *sdkp)
  {
-	unsigned char cmd[10];
+	static const u8 cmd[10] = { TEST_UNIT_READY };
  	unsigned long spintime_expire = 0;
-	int retries, spintime;
+	int spintime, sense_valid = 0;
  	unsigned int the_result;
  	struct scsi_sense_hdr sshdr;
+	struct scsi_failure failure_defs[] = {
+		/* Do not retry Medium Not Present */
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3A,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x3A,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Retry when scsi_status_is_good would return false 3 times */
+		{
+			.result = SCMD_FAILURE_STAT_ANY,
+			.allowed = 3,
+		},
+		{}




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux