It's common to get a UA when doing PR commands. It could be due to a
target restarting, transport level relogin or other PR commands like a
release causing it. The upper layers don't get the sense and in some cases
have no idea if it's a SCSI device, so this has the sd layer retry.
Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
drivers/scsi/sd.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0d73145430a4..87a8feabc2b4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1800,8 +1800,22 @@ static int sd_pr_in_command(struct block_device *bdev, u8 sa,
struct scsi_device *sdev = sdkp->device;
struct scsi_sense_hdr sshdr;
u8 cmd[10] = { PERSISTENT_RESERVE_IN, sa };
+ struct scsi_failure failure_defs[] = {
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = SCMD_FAILURE_ASC_ANY,
+ .ascq = SCMD_FAILURE_ASCQ_ANY,
+ .allowed = 5,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {}
+ };
+ struct scsi_failures failures = {
+ .failure_definitions = failure_defs,
+ };
const struct scsi_exec_args exec_args = {
.sshdr = &sshdr,
+ .failures = &failures,
};
int result;
@@ -1888,8 +1902,22 @@ static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key,
struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
struct scsi_device *sdev = sdkp->device;
struct scsi_sense_hdr sshdr;
+ struct scsi_failure failure_defs[] = {
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = SCMD_FAILURE_ASC_ANY,
+ .ascq = SCMD_FAILURE_ASCQ_ANY,
+ .allowed = 5,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {}
+ };
+ struct scsi_failures failures = {
+ .failure_definitions = failure_defs,
+ };
const struct scsi_exec_args exec_args = {
.sshdr = &sshdr,
+ .failures = &failures,
};
int result;
u8 cmd[16] = { 0, };
--
2.34.1
