https://bugzilla.kernel.org/show_bug.cgi?id=218030 Bagas Sanjaya (bagasdotme@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bagasdotme@xxxxxxxxx --- Comment #1 from Bagas Sanjaya (bagasdotme@xxxxxxxxx) --- (In reply to Nikolaos Barkas from comment #0) > Hello guys, > > marvell sas driver fails to resume from suspend/hibernate properly and the > disks disappear. The issue most likely affects all the chips supported by > this driver. > > For the first test, I booted the system with 2 ATA disks attached to the > onboard SAS controller and did a suspend/resume cycle followed by a get > health info cmd. > For the second test, I booted the system with a SAS disk attached to the > onboard SAS controller and did a hibernate/resume cycle followed by a gnome > disks read cmd. > The boot drive is not attached to the marvell sas controller. > > When I try to access the disks after resuming from suspend/hibernate the > system becomes dead slow and the disks show no sign of life. > The system cannot power off by itself at this stage, it needs a hard reset > or a power off by the psu switch. > > The most important parts of the kernel log can be found below. > I have provided mainly the mvsas messages and those that have to do with the > suspend/resume. > > Suspend/resume with ata disks and then trying to get health info: > > [ 0.000000] Linux version 6.1.57-vanilla (turbo@dbn-003) (gcc (Debian > 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #14 SMP > PREEMPT_DYNAMIC Sat Oct 14 11:48:05 EEST 2023 > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.57-vanilla > root=/dev/mapper/test-root ro quiet > > [ 0.345919] pci 0000:06:00.0: [11ab:6440] type 00 class 0x010400 > [ 0.345956] pci 0000:06:00.0: reg 0x18: [io 0xbc00-0xbc7f] > [ 0.345980] pci 0000:06:00.0: reg 0x20: [mem 0xfbaff000-0xfbafffff 64bit] > [ 0.345991] pci 0000:06:00.0: reg 0x30: [mem 0xfba80000-0xfbabffff pref] > [ 0.346048] pci 0000:06:00.0: supports D1 > [ 0.346049] pci 0000:06:00.0: PME# supported from D0 D1 D3hot > [ 0.346078] pci 0000:06:00.0: 2.000 Gb/s available PCIe bandwidth, > limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 8.000 Gb/s with > 2.5 GT/s PCIe x4 link) > [ 0.346130] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You > can enable it with 'pcie_aspm=force' > > [ 1.455071] mvsas 0000:06:00.0: mvsas: driver version 0.8.16 > [ 1.455288] mvsas 0000:06:00.0: mvsas: PCI-E x1, Bandwidth Usage: 2.5 Gbps > > [ 4.295662] scsi host0: mvsas > [ 4.297425] sas: phy-0:0 added to port-0:0, phy_mask:0x1 > (0000000000000000) > [ 4.297575] sas: DOING DISCOVERY on port 0, pid:76 > [ 4.297638] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 > [ 4.297683] sas: ata9: end_device-0:0: dev error handler > > [ 4.458061] ata9.00: ATA-7: WDC WD740ADFD-00NLR4, 21.07QR4, max UDMA/133 > [ 4.458068] ata9.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 32) > [ 4.461181] ata9.00: configured for UDMA/133 > [ 4.461304] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: > 1 > [ 4.471938] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 > 7QR4 PQ: 0 ANSI: 5 > [ 4.472713] sas: DONE DISCOVERY on port 0, pid:76, result:0 > [ 4.472809] sas: phy-0:1 added to port-0:1, phy_mask:0x2 > (0100000000000000) > [ 4.472901] sas: DOING DISCOVERY on port 1, pid:76 > [ 4.472959] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 > [ 4.472980] sas: ata9: end_device-0:0: dev error handler > [ 4.472996] sas: ata10: end_device-0:1: dev error handler > [ 4.601099] scsi 9:0:0:0: Direct-Access Corsair Flash Voyager > 1100 PQ: 0 ANSI: 0 CCS > [ 4.640508] ata10.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B03, max UDMA/133 > [ 4.640515] ata10.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 4.641755] ata10.00: configured for UDMA/133 > [ 4.641848] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: > 1 > [ 4.652603] scsi 0:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 > 3B03 PQ: 0 ANSI: 5 > [ 4.653764] sas: DONE DISCOVERY on port 1, pid:76, result:0 > [ 4.654348] sd 0:0:0:0: [sdb] 145226112 512-byte logical blocks: (74.4 > GB/69.2 GiB) > [ 4.654398] sd 0:0:0:0: [sdb] Write Protect is off > [ 4.654403] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 4.654420] sd 0:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 > GB/466 GiB) > [ 4.654445] sd 0:0:1:0: [sdc] Write Protect is off > [ 4.654448] sd 0:0:1:0: [sdc] Mode Sense: 00 3a 00 00 > [ 4.654454] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 4.654484] sd 0:0:1:0: [sdc] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 4.654506] sd 0:0:0:0: [sdb] Preferred minimum I/O size 512 bytes > [ 4.654582] sd 0:0:1:0: [sdc] Preferred minimum I/O size 512 bytes > [ 4.669569] sd 0:0:0:0: [sdb] Attached SCSI disk > [ 4.689648] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 > [ 4.690245] sd 0:0:1:0: [sdc] Attached SCSI disk > > [ 13.638335] sd 0:0:0:0: Attached scsi generic sg1 type 0 > [ 13.638855] sd 0:0:1:0: Attached scsi generic sg2 type 0 > > [ 13.845300] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 13.845305] sas: ata9: end_device-0:0: cmd error handler > [ 13.853646] sas: ata9: end_device-0:0: dev error handler > [ 13.853649] sas: ata10: end_device-0:1: dev error handler > [ 13.853737] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: > 1 > [ 14.031723] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 14.031732] sas: ata10: end_device-0:1: cmd error handler > [ 14.031795] sas: ata9: end_device-0:0: dev error handler > [ 14.031813] sas: ata10: end_device-0:1: dev error handler > [ 14.031906] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: > 1 > > [ 15.007725] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 15.007731] sas: ata10: end_device-0:1: cmd error handler > [ 15.007752] sas: ata9: end_device-0:0: dev error handler > [ 15.007762] sas: ata10: end_device-0:1: dev error handler > [ 15.007777] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: > 1 > > [ 252.047782] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 252.047790] sas: ata9: end_device-0:0: cmd error handler > [ 252.047868] sas: ata9: end_device-0:0: dev error handler > [ 252.047892] sas: ata10: end_device-0:1: dev error handler > [ 252.047938] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: > 1 > [ 252.287724] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 252.287731] sas: ata9: end_device-0:0: cmd error handler > [ 252.287791] sas: ata9: end_device-0:0: dev error handler > [ 252.287812] sas: ata10: end_device-0:1: dev error handler > [ 252.287846] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: > 1 > > [ 437.249448] PM: suspend entry (deep) > [ 437.255308] Filesystems sync: 0.005 seconds > [ 437.255570] Freezing user space processes > [ 437.257093] Freezing user space processes completed (elapsed 0.001 > seconds) > [ 437.257097] OOM killer disabled. > [ 437.257098] Freezing remaining freezable tasks > [ 437.258226] Freezing remaining freezable tasks completed (elapsed 0.001 > seconds) > [ 437.258281] printk: Suspending console(s) (use no_console_suspend to > debug) > [ 437.291778] sd 0:0:0:0: [sdb] Synchronizing SCSI cache > [ 437.291825] sd 0:0:1:0: [sdc] Synchronizing SCSI cache > [ 437.292083] sd 0:0:0:0: [sdb] Stopping disk > [ 437.292083] sd 0:0:1:0: [sdc] Stopping disk > [ 438.363660] sd 1:0:0:0: [sda] Synchronizing SCSI cache > [ 438.363760] sd 1:0:0:0: [sda] Stopping disk > [ 440.904334] ACPI: PM: Preparing to enter system sleep state S3 > [ 440.904747] ACPI: PM: Saving platform NVS memory > [ 440.905096] Disabling non-boot CPUs ... > [ 440.907196] smpboot: CPU 1 is now offline > [ 440.909798] smpboot: CPU 2 is now offline > [ 440.912577] smpboot: CPU 3 is now offline > [ 440.914657] smpboot: CPU 4 is now offline > [ 440.916752] smpboot: CPU 5 is now offline > [ 440.918814] smpboot: CPU 6 is now offline > [ 440.921256] smpboot: CPU 7 is now offline > [ 440.923173] smpboot: CPU 8 is now offline > [ 440.925090] smpboot: CPU 9 is now offline > [ 440.926963] smpboot: CPU 10 is now offline > [ 440.928796] smpboot: CPU 11 is now offline > [ 440.930412] ACPI: PM: Low-level resume complete > [ 440.930434] ACPI: PM: Restoring platform NVS memory > [ 440.930850] Enabling non-boot CPUs ... > [ 440.930895] x86: Booting SMP configuration: > [ 440.930896] smpboot: Booting Node 0 Processor 1 APIC 0x2 > [ 440.934817] CPU1 is up > [ 440.934853] smpboot: Booting Node 0 Processor 2 APIC 0x4 > [ 440.937922] CPU2 is up > [ 440.937956] smpboot: Booting Node 0 Processor 3 APIC 0x10 > [ 440.941085] CPU3 is up > [ 440.941119] smpboot: Booting Node 0 Processor 4 APIC 0x12 > [ 440.944217] CPU4 is up > [ 440.944249] smpboot: Booting Node 0 Processor 5 APIC 0x14 > [ 440.947416] CPU5 is up > [ 440.947450] smpboot: Booting Node 0 Processor 6 APIC 0x1 > [ 440.950671] CPU6 is up > [ 440.950702] smpboot: Booting Node 0 Processor 7 APIC 0x3 > [ 440.953929] CPU7 is up > [ 440.953959] smpboot: Booting Node 0 Processor 8 APIC 0x5 > [ 440.957246] CPU8 is up > [ 440.957289] smpboot: Booting Node 0 Processor 9 APIC 0x11 > [ 440.960652] CPU9 is up > [ 440.960680] smpboot: Booting Node 0 Processor 10 APIC 0x13 > [ 440.964037] CPU10 is up > [ 440.964065] smpboot: Booting Node 0 Processor 11 APIC 0x15 > [ 440.967511] CPU11 is up > [ 440.980236] ACPI: PM: Waking up from system sleep state S3 > [ 440.982206] usb usb1: root hub lost power or was reset > [ 440.982228] usb usb2: root hub lost power or was reset > [ 440.982256] usb usb3: root hub lost power or was reset > [ 440.982289] usb usb5: root hub lost power or was reset > [ 440.982356] usb usb7: root hub lost power or was reset > [ 440.982397] usb usb8: root hub lost power or was reset > [ 441.361544] OOM killer enabled. > [ 441.361546] Restarting tasks ... > [ 441.362985] done. > [ 441.362992] random: crng reseeded on system resumption > [ 441.362996] PM: suspend exit > [ 441.521348] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 441.535235] ata1.00: configured for UDMA/133 > [ 441.535456] ata1.00: Enabling discard_zeroes_data > [ 441.561306] firewire_core 0000:0b:04.0: rediscovered device fw0 > [ 441.650468] RTL8211B Gigabit Ethernet r8169-0-800:00: attached PHY driver > (mii_bus:phy_addr=r8169-0-800:00, irq=MAC) > [ 441.715440] r8169 0000:08:00.0 enp8s0: Link is Down > [ 441.716682] RTL8211B Gigabit Ethernet r8169-0-900:00: attached PHY driver > (mii_bus:phy_addr=r8169-0-900:00, irq=MAC) > [ 441.780180] r8169 0000:09:00.0 enp9s0: Link is Down > [ 472.289330] usb 6-1: reset high-speed USB device number 2 using ehci-pci > > [ 586.861381] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 > [ 586.861389] sas: trying to find task 0x00000000efe4484d > [ 586.861393] sas: sas_scsi_find_task: aborting task 0x00000000efe4484d > [ 586.861397] sas: sas_scsi_find_task: task 0x00000000efe4484d is aborted > [ 586.861399] sas: sas_eh_handle_sas_errors: task 0x00000000efe4484d is > aborted > [ 586.861403] sas: ata10: end_device-0:1: cmd error handler > [ 586.861470] sas: ata9: end_device-0:0: dev error handler > [ 586.861486] sas: ata10: end_device-0:1: dev error handler > [ 589.081341] drivers/scsi/mvsas/mv_sas.c 1304:mvs_I_T_nexus_reset for > device[1]:rc= 0 > [ 610.481270] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: > [ 610.481280] rcu: 11-...0: (0 ticks this GP) > idle=4f84/1/0x4000000000000000 softirq=19873/19873 fqs=1159 > [ 610.481292] (detected by 5, t=5252 jiffies, g=53581, q=31630 > ncpus=12) > [ 610.481299] Sending NMI from CPU 5 to CPUs 11: > [ 610.481309] NMI backtrace for cpu 11 > [ 610.481312] CPU: 11 PID: 3152 Comm: kworker/u32:59 Tainted: G I > 6.1.57-vanilla #14 > [ 610.481318] Hardware name: System manufacturer System Product Name/P6T WS > PRO, BIOS 1205 09/24/2010 > [ 610.481321] Workqueue: events_unbound async_run_entry_fn > [ 610.481329] RIP: 0010:mvs_int_rx+0x81/0x150 [mvsas] > [ 610.481346] Code: 00 00 44 39 75 70 74 47 48 8b 45 60 45 89 e6 41 81 e6 > ff 03 00 00 41 8d 56 01 8b 1c 90 49 89 d4 41 89 df 41 81 e7 00 00 08 00 <f7> > c3 00 00 01 00 74 58 31 d2 89 de 48 89 ef e8 0b f9 ff ff 45 85 > [ 610.481350] RSP: 0018:ffffb61f06acbb60 EFLAGS: 00000046 > [ 610.481354] RAX: ffff9a7cc2658000 RBX: 0000000000010000 RCX: > 0000000000000000 > [ 610.481358] RDX: 000000000000026e RSI: 0000000000010000 RDI: > ffff9a7ce2660000 > [ 610.481361] RBP: ffff9a7ce2660000 R08: ffff9a7ce2660f00 R09: > ffff9a7ce2660000 > [ 610.481364] R10: ffff9a7ce26600c8 R11: ffffffff884d4300 R12: > 000000000000026e > [ 610.481367] R13: 0000000000000000 R14: 000000000000026d R15: > 0000000000000000 > [ 610.481371] FS: 0000000000000000(0000) GS:ffff9a7df7cc0000(0000) > knlGS:0000000000000000 > [ 610.481375] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 610.481378] CR2: 0000563633425300 CR3: 0000000077210006 CR4: > 00000000000206e0 > [ 610.481382] Call Trace: > [ 610.481385] <NMI> > [ 610.481389] ? nmi_cpu_backtrace.cold+0x1b/0x76 > [ 610.481398] ? nmi_cpu_backtrace_handler+0xd/0x20 > [ 610.481403] ? nmi_handle+0x5d/0x120 > [ 610.481410] ? mvs_int_rx+0x81/0x150 [mvsas] > [ 610.481423] ? default_do_nmi+0x69/0x170 > [ 610.481428] ? exc_nmi+0x13c/0x170 > [ 610.481432] ? end_repeat_nmi+0x16/0x67 > [ 610.481443] ? mvs_int_rx+0x81/0x150 [mvsas] > [ 610.481457] ? mvs_int_rx+0x81/0x150 [mvsas] > [ 610.481470] ? mvs_int_rx+0x81/0x150 [mvsas] > [ 610.481483] </NMI> > [ 610.481484] <TASK> > [ 610.481487] mvs_do_release_task+0x3f/0x90 [mvsas] > [ 610.481501] mvs_release_task+0x13e/0x1a0 [mvsas] > [ 610.481516] mvs_I_T_nexus_reset+0xb2/0xd0 [mvsas] > [ 610.481530] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 610.481552] sas_ata_hard_reset+0x48/0x80 [libsas] > [ 610.481575] ata_eh_reset+0x2e5/0x1090 [libata] > [ 610.481631] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 610.481652] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 610.481676] ata_eh_recover+0x2e6/0xe00 [libata] > [ 610.481728] ? __wake_up_klogd.part.0+0x56/0x80 > [ 610.481735] ? vprintk_emit+0x207/0x290 > [ 610.481739] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 610.481760] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 610.481783] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 610.481804] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 610.481824] ata_do_eh+0x75/0xf0 [libata] > [ 610.481876] ? del_timer_sync+0x6f/0xb0 > [ 610.481884] ata_scsi_port_error_handler+0x3a8/0x800 [libata] > [ 610.481938] async_sas_ata_eh+0x44/0x7f [libsas] > [ 610.481960] async_run_entry_fn+0x30/0x130 > [ 610.481966] process_one_work+0x1c7/0x380 > [ 610.481974] worker_thread+0x4d/0x380 > [ 610.481981] ? rescuer_thread+0x3a0/0x3a0 > [ 610.481987] kthread+0xe9/0x110 > [ 610.481992] ? kthread_complete_and_exit+0x20/0x20 > [ 610.481999] ret_from_fork+0x22/0x30 > [ 610.482009] </TASK> > [ 665.286198] NMI watchdog: Watchdog detected hard LOCKUP on cpu 11 > [ 665.286200] Modules linked in: nls_ascii nls_cp437 vfat fat nvme_fabrics > nvme_core snd_seq_dummy snd_hrtimer snd_seq snd_seq_device rfkill qrtr > cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_userspace > binfmt_misc snd_hda_codec_analog snd_hda_codec_generic ledtrig_audio > intel_powerclamp snd_hda_intel kvm_intel snd_intel_dspcfg snd_intel_sdw_acpi > kvm snd_hda_codec snd_hda_core irqbypass snd_hwdep intel_cstate iTCO_wdt > snd_pcm intel_pmc_bxt iTCO_vendor_support snd_timer intel_uncore serio_raw > pcspkr watchdog snd soundcore i7core_edac i5500_temp sg asus_atk0110 evdev > coretemp acpi_cpufreq hwmon_vid msr parport_pc ppdev lp parport fuse > efi_pstore loop configfs ip_tables x_tables autofs4 ext4 crc32c_generic > crc16 mbcache jbd2 dm_crypt dm_mod hid_logitech_hidpp hid_logitech_dj sd_mod > t10_pi crc64_rocksoft_generic crc64_rocksoft hid_generic crc_t10dif uas > ata_generic crct10dif_generic usbhid hid usb_storage crc64 pata_marvell > nouveau crct10dif_pclmul crct10dif_common > [ 665.286238] crc32_pclmul crc32c_intel ghash_clmulni_intel video > sha512_ssse3 i2c_algo_bit sha512_generic drm_display_helper cec rc_core > drm_ttm_helper mvsas ttm libsas ahci scsi_transport_sas drm_kms_helper r8169 > libahci ehci_pci uhci_hcd realtek firewire_ohci ehci_hcd mxm_wmi aesni_intel > libata crypto_simd lpc_ich cryptd psmouse drm i2c_i801 mdio_devres scsi_mod > usbcore i2c_smbus firewire_core libphy crc_itu_t scsi_common usb_common wmi > button > [ 665.286257] CPU: 11 PID: 3152 Comm: kworker/u32:59 Tainted: G I > 6.1.57-vanilla #14 > [ 665.286259] Hardware name: System manufacturer System Product Name/P6T WS > PRO, BIOS 1205 09/24/2010 > [ 665.286260] Workqueue: events_unbound async_run_entry_fn > [ 665.286265] RIP: 0010:mvs_slot_complete+0x0/0x540 [mvsas] > [ 665.286273] Code: 3c 05 00 00 48 c7 c6 28 36 8f c0 48 c7 c7 ac 36 8f c0 > e8 31 e4 af c6 89 d8 5b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 <0f> > 1f 44 00 00 41 57 41 56 41 55 41 89 f5 41 81 e5 ff 0f 00 00 41 > [ 665.286275] RSP: 0018:ffffb61f06acbb58 EFLAGS: 00000046 > [ 665.286276] RAX: ffff9a7cc2658000 RBX: 0000000000010006 RCX: > 0000000000000000 > [ 665.286277] RDX: 0000000000000000 RSI: 0000000000010006 RDI: > ffff9a7ce2660000 > [ 665.286278] RBP: ffff9a7ce2660000 R08: ffff9a7ce2660f00 R09: > ffff9a7ce2660160 > [ 665.286279] R10: ffff9a7ce26600c8 R11: ffffffff884d4300 R12: > 00000000000001a4 > [ 665.286280] R13: 0000000000000000 R14: 00000000000001a3 R15: > 0000000000000000 > [ 665.286282] FS: 0000000000000000(0000) GS:ffff9a7df7cc0000(0000) > knlGS:0000000000000000 > [ 665.286283] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 665.286284] CR2: 0000563633425300 CR3: 0000000077210006 CR4: > 00000000000206e0 > [ 665.286286] Call Trace: > [ 665.286288] <NMI> > [ 665.286290] ? watchdog_overflow_callback.cold+0x20/0x7e > [ 665.286295] ? __perf_event_overflow+0xe5/0x2a0 > [ 665.286299] ? handle_pmi_common+0x185/0x3a0 > [ 665.286306] ? intel_pmu_handle_irq+0x124/0x480 > [ 665.286309] ? perf_event_nmi_handler+0x26/0x50 > [ 665.286312] ? mvs_query_task+0x60/0x60 [mvsas] > [ 665.286317] ? nmi_handle+0x5d/0x120 > [ 665.286320] ? mvs_query_task+0x60/0x60 [mvsas] > [ 665.286324] ? default_do_nmi+0x69/0x170 > [ 665.286326] ? exc_nmi+0x13c/0x170 > [ 665.286328] ? end_repeat_nmi+0x16/0x67 > [ 665.286332] ? mvs_query_task+0x60/0x60 [mvsas] > [ 665.286336] ? mvs_query_task+0x60/0x60 [mvsas] > [ 665.286341] ? mvs_query_task+0x60/0x60 [mvsas] > [ 665.286346] </NMI> > [ 665.286346] <TASK> > [ 665.286347] mvs_int_rx+0x95/0x150 [mvsas] > [ 665.286352] mvs_do_release_task+0x3f/0x90 [mvsas] > [ 665.286357] mvs_release_task+0x13e/0x1a0 [mvsas] > [ 665.286362] mvs_I_T_nexus_reset+0xb2/0xd0 [mvsas] > [ 665.286368] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 665.286377] sas_ata_hard_reset+0x48/0x80 [libsas] > [ 665.286386] ata_eh_reset+0x2e5/0x1090 [libata] > [ 665.286413] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 665.286421] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 665.286429] ata_eh_recover+0x2e6/0xe00 [libata] > [ 665.286448] ? __wake_up_klogd.part.0+0x56/0x80 > [ 665.286452] ? vprintk_emit+0x207/0x290 > [ 665.286454] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 665.286464] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 665.286474] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 665.286484] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 665.286495] ata_do_eh+0x75/0xf0 [libata] > [ 665.286516] ? del_timer_sync+0x6f/0xb0 > [ 665.286519] ata_scsi_port_error_handler+0x3a8/0x800 [libata] > [ 665.286538] async_sas_ata_eh+0x44/0x7f [libsas] > [ 665.286546] async_run_entry_fn+0x30/0x130 > [ 665.286549] process_one_work+0x1c7/0x380 > [ 665.286553] worker_thread+0x4d/0x380 > [ 665.286555] ? rescuer_thread+0x3a0/0x3a0 > [ 665.286557] kthread+0xe9/0x110 > [ 665.286559] ? kthread_complete_and_exit+0x20/0x20 > [ 665.286562] ret_from_fork+0x22/0x30 > [ 665.286565] </TASK> > [ 673.501273] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: > [ 673.501280] rcu: 11-...0: (0 ticks this GP) > idle=4f84/1/0x4000000000000000 softirq=19873/19873 fqs=4311 > [ 673.501286] (detected by 0, t=21007 jiffies, g=53581, q=120696 > ncpus=12) > [ 673.501289] Sending NMI from CPU 0 to CPUs 11: > [ 673.501296] NMI backtrace for cpu 11 > [ 673.501298] CPU: 11 PID: 3152 Comm: kworker/u32:59 Tainted: G I > 6.1.57-vanilla #14 > [ 673.501301] Hardware name: System manufacturer System Product Name/P6T WS > PRO, BIOS 1205 09/24/2010 > [ 673.501302] Workqueue: events_unbound async_run_entry_fn > [ 673.501306] RIP: 0010:mvs_slot_complete+0x28/0x540 [mvsas] > [ 673.501315] Code: 00 00 0f 1f 44 00 00 41 57 41 56 41 55 41 89 f5 41 81 > e5 ff 0f 00 00 41 54 45 89 ec 55 4b 8d 04 a4 53 49 8d 04 44 48 c1 e0 03 <4c> > 8d 0c 07 48 83 ec 20 49 8b 99 08 fd 00 00 89 54 24 08 4c 89 0c > [ 673.501316] RSP: 0018:ffffb61f06acbb28 EFLAGS: 00000046 > [ 673.501318] RAX: 0000000000000000 RBX: 0000000000010000 RCX: > 0000000000000000 > [ 673.501319] RDX: 0000000000000000 RSI: 0000000000010000 RDI: > ffff9a7ce2660000 > [ 673.501320] RBP: ffff9a7ce2660000 R08: ffff9a7ce2660f00 R09: > ffff9a7ce2660058 > [ 673.501321] R10: ffff9a7ce26600c8 R11: ffffffff884d4300 R12: > 0000000000000000 > [ 673.501322] R13: 0000000000000000 R14: 0000000000000149 R15: > 0000000000000000 > [ 673.501323] FS: 0000000000000000(0000) GS:ffff9a7df7cc0000(0000) > knlGS:0000000000000000 > [ 673.501324] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 673.501325] CR2: 0000563633425300 CR3: 0000000077210006 CR4: > 00000000000206e0 > [ 673.501327] Call Trace: > [ 673.501329] <NMI> > [ 673.501331] ? nmi_cpu_backtrace.cold+0x1b/0x76 > [ 673.501335] ? nmi_cpu_backtrace_handler+0xd/0x20 > [ 673.501337] ? nmi_handle+0x5d/0x120 > [ 673.501340] ? mvs_slot_complete+0x28/0x540 [mvsas] > [ 673.501345] ? default_do_nmi+0x69/0x170 > [ 673.501347] ? exc_nmi+0x13c/0x170 > [ 673.501348] ? end_repeat_nmi+0x16/0x67 > [ 673.501353] ? mvs_slot_complete+0x28/0x540 [mvsas] > [ 673.501358] ? mvs_slot_complete+0x28/0x540 [mvsas] > [ 673.501362] ? mvs_slot_complete+0x28/0x540 [mvsas] > [ 673.501367] </NMI> > [ 673.501368] <TASK> > [ 673.501369] mvs_int_rx+0x95/0x150 [mvsas] > [ 673.501374] mvs_do_release_task+0x3f/0x90 [mvsas] > [ 673.501379] mvs_release_task+0x13e/0x1a0 [mvsas] > [ 673.501384] mvs_I_T_nexus_reset+0xb2/0xd0 [mvsas] > [ 673.501389] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 673.501399] sas_ata_hard_reset+0x48/0x80 [libsas] > [ 673.501407] ata_eh_reset+0x2e5/0x1090 [libata] > [ 673.501433] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 673.501440] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 673.501449] ata_eh_recover+0x2e6/0xe00 [libata] > [ 673.501467] ? __wake_up_klogd.part.0+0x56/0x80 > [ 673.501470] ? vprintk_emit+0x207/0x290 > [ 673.501471] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 673.501479] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 673.501487] ? smp_ata_check_ready_type+0xb0/0xb0 [libsas] > [ 673.501495] ? sas_ata_wait_after_reset+0x80/0x80 [libsas] > [ 673.501502] ata_do_eh+0x75/0xf0 [libata] > [ 673.501521] ? del_timer_sync+0x6f/0xb0 > [ 673.501523] ata_scsi_port_error_handler+0x3a8/0x800 [libata] > [ 673.501542] async_sas_ata_eh+0x44/0x7f [libsas] > [ 673.501551] async_run_entry_fn+0x30/0x130 > [ 673.501553] process_one_work+0x1c7/0x380 > [ 673.501556] worker_thread+0x4d/0x380 > [ 673.501558] ? rescuer_thread+0x3a0/0x3a0 > [ 673.501561] kthread+0xe9/0x110 > [ 673.501563] ? kthread_complete_and_exit+0x20/0x20 > [ 673.501565] ret_from_fork+0x22/0x30 > [ 673.501569] </TASK> > > > > Hibernate/resume with a sas disk and then running gnome disks for a couple > of reads: > > [ 0.000000] Linux version 6.1.57-vanilla (turbo@dbn-003) (gcc (Debian > 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #14 SMP > PREEMPT_DYNAMIC Sat Oct 14 11:48:05 EEST 2023 > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.57-vanilla > root=/dev/mapper/test-root ro quiet > > 4.191667] scsi host0: mvsas > [ 4.202932] sas: phy-0:1 added to port-0:0, phy_mask:0x2 > (2bad2bad2bad2bad) > [ 4.202935] drivers/scsi/mvsas/mv_sas.c 1099:set wide port phy map 2 > [ 4.232802] sas: DOING DISCOVERY on port 0, pid:78 > [ 4.234233] scsi 0:0:0:0: Direct-Access WD WD3001HKHG-02VUC > SR07 PQ: 0 ANSI: 6 > [ 4.234723] scsi 0:0:0:0: Power-on or device reset occurred > [ 4.243180] sas: DONE DISCOVERY on port 0, pid:78, result:0 > [ 4.243958] sd 0:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 > GB/279 GiB) > [ 4.251366] sd 0:0:0:0: [sdb] Write Protect is off > [ 4.251372] sd 0:0:0:0: [sdb] Mode Sense: df 00 10 08 > [ 4.256088] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, > supports DPO and FUA > > [ 331.841349] PM: hibernation: hibernation entry > [ 331.846068] Filesystems sync: 0.004 seconds > [ 331.846251] Freezing user space processes > [ 331.847662] Freezing user space processes completed (elapsed 0.001 > seconds) > [ 331.847665] OOM killer disabled. > [ 331.847752] PM: hibernation: Marking nosave pages: [mem > 0x00000000-0x00000fff] > [ 331.847754] PM: hibernation: Marking nosave pages: [mem > 0x0009c000-0x000fffff] > [ 331.847757] PM: hibernation: Marking nosave pages: [mem > 0xbf780000-0xffffffff] > [ 331.848818] PM: hibernation: Basic memory bitmaps created > [ 331.848868] PM: hibernation: Preallocating image memory > [ 332.320952] PM: hibernation: Allocated 468298 pages for snapshot > [ 332.320958] PM: hibernation: Allocated 1873192 kbytes in 0.47 seconds > (3985.51 MB/s) > [ 332.320961] Freezing remaining freezable tasks > [ 332.322205] Freezing remaining freezable tasks completed (elapsed 0.001 > seconds) > [ 332.322378] printk: Suspending console(s) (use no_console_suspend to > debug) > [ 334.826522] ACPI: PM: Preparing to enter system sleep state S4 > [ 334.826773] ACPI: PM: Saving platform NVS memory > [ 334.826979] Disabling non-boot CPUs ... > [ 334.829452] smpboot: CPU 1 is now offline > [ 334.831537] smpboot: CPU 2 is now offline > [ 334.833750] smpboot: CPU 3 is now offline > [ 334.835897] smpboot: CPU 4 is now offline > [ 334.838296] smpboot: CPU 5 is now offline > [ 334.840868] smpboot: CPU 6 is now offline > [ 334.842966] smpboot: CPU 7 is now offline > [ 334.845060] smpboot: CPU 8 is now offline > [ 334.847030] smpboot: CPU 9 is now offline > [ 334.848955] smpboot: CPU 10 is now offline > [ 334.850837] smpboot: CPU 11 is now offline > [ 334.851340] PM: hibernation: Creating image: > [ 335.133820] PM: hibernation: Need to copy 480821 pages > [ 335.133826] PM: hibernation: Normal pages needed: 480821 + 1024, > available pages: 1613904 > [ 334.852388] ACPI: PM: Restoring platform NVS memory > [ 334.852777] Enabling non-boot CPUs ... > [ 334.852817] x86: Booting SMP configuration: > [ 334.852818] smpboot: Booting Node 0 Processor 1 APIC 0x2 > [ 334.856338] CPU1 is up > [ 334.856369] smpboot: Booting Node 0 Processor 2 APIC 0x4 > [ 334.859345] CPU2 is up > [ 334.859375] smpboot: Booting Node 0 Processor 3 APIC 0x10 > [ 334.862383] CPU3 is up > [ 334.862412] smpboot: Booting Node 0 Processor 4 APIC 0x12 > [ 334.865376] CPU4 is up > [ 334.865407] smpboot: Booting Node 0 Processor 5 APIC 0x14 > [ 334.868395] CPU5 is up > [ 334.868423] smpboot: Booting Node 0 Processor 6 APIC 0x1 > [ 334.871618] CPU6 is up > [ 334.871649] smpboot: Booting Node 0 Processor 7 APIC 0x3 > [ 334.874844] CPU7 is up > [ 334.874878] smpboot: Booting Node 0 Processor 8 APIC 0x5 > [ 334.878160] CPU8 is up > [ 334.878189] smpboot: Booting Node 0 Processor 9 APIC 0x11 > [ 334.881557] CPU9 is up > [ 334.881586] smpboot: Booting Node 0 Processor 10 APIC 0x13 > [ 334.884946] CPU10 is up > [ 334.884974] smpboot: Booting Node 0 Processor 11 APIC 0x15 > [ 334.888415] CPU11 is up > [ 334.901008] ACPI: PM: Waking up from system sleep state S4 > [ 335.001313] usb usb4: root hub lost power or was reset > [ 335.001314] usb usb2: root hub lost power or was reset > [ 335.001314] usb usb5: root hub lost power or was reset > [ 335.001365] usb usb1: root hub lost power or was reset > [ 335.001372] usb usb6: root hub lost power or was reset > [ 335.001375] usb usb7: root hub lost power or was reset > [ 335.001428] usb usb8: root hub lost power or was reset > [ 335.001449] usb usb3: root hub lost power or was reset > [ 335.297280] usb 3-4: reset high-speed USB device number 2 using ehci-pci > [ 335.537215] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 335.549624] ata1.00: configured for UDMA/133 > [ 335.549810] ata1.00: Enabling discard_zeroes_data > [ 335.769243] usb 3-4.3: reset full-speed USB device number 3 using ehci-pci > [ 335.957245] usb 3-4.4: reset full-speed USB device number 4 using ehci-pci > [ 336.385247] usb 3-4.4.1: reset full-speed USB device number 5 using > ehci-pci > [ 336.539864] PM: hibernation: Basic memory bitmaps freed > [ 336.540367] OOM killer enabled. > [ 336.540368] Restarting tasks ... > [ 336.541593] done. > [ 336.541600] PM: hibernation: hibernation exit > [ 336.636953] RTL8211B Gigabit Ethernet r8169-0-800:00: attached PHY driver > (mii_bus:phy_addr=r8169-0-800:00, irq=MAC) > [ 336.703336] r8169 0000:08:00.0 enp8s0: Link is Down > [ 336.704991] RTL8211B Gigabit Ethernet r8169-0-900:00: attached PHY driver > (mii_bus:phy_addr=r8169-0-900:00, irq=MAC) > [ 336.772497] r8169 0000:09:00.0 enp9s0: Link is Down > > [ 463.977280] sas: Enter sas_scsi_recover_host busy: 3 failed: 3 > [ 463.977288] sas: trying to find task 0x00000000f13c22cf > [ 463.977292] sas: sas_scsi_find_task: aborting task 0x00000000f13c22cf > [ 463.977416] sas: task done but aborted > [ 463.977422] sas: sas_scsi_find_task: task 0x00000000f13c22cf is done > [ 463.977425] sas: sas_eh_handle_sas_errors: task 0x00000000f13c22cf is done > [ 463.977429] sas: trying to find task 0x0000000089d39e25 > [ 463.977431] sas: sas_scsi_find_task: aborting task 0x0000000089d39e25 > [ 472.026033] sas: task done but aborted > [ 472.026040] sas: sas_scsi_find_task: task 0x0000000089d39e25 is done > [ 472.026044] sas: sas_eh_handle_sas_errors: task 0x0000000089d39e25 is done > [ 472.026048] sas: trying to find task 0x000000002d226601 > [ 472.026050] sas: sas_scsi_find_task: aborting task 0x000000002d226601 > [ 492.601193] sas: TMF task timeout for 2bad2bad2bad2bad and not done > [ 492.601204] drivers/scsi/mvsas/mv_sas.c 1410:mvs_abort_task:rc= 5 > [ 492.601208] sas: sas_scsi_find_task: querying task 0x000000002d226601 > [ 513.081228] sas: TMF task timeout for 2bad2bad2bad2bad and not done > [ 513.081241] drivers/scsi/mvsas/mv_sas.c 1340:mvs_query_task:rc= 5 > [ 513.081247] sas: sas_scsi_find_task: task 0x000000002d226601 failed to > abort > [ 513.081252] sas: task 0x000000002d226601 is not at LU: I_T recover > [ 513.081255] sas: I_T nexus reset for dev 2bad2bad2bad2bad > [ 513.577383] drivers/scsi/mvsas/mv_sas.c 1690:Release slot [5] tag[5], > task [000000002d226601]: > [ 513.577396] sas: task done but aborted > [ 513.577398] drivers/scsi/mvsas/mv_sas.c 1690:Release slot [1] tag[1], > task [00000000d0d28957]: > [ 515.321219] drivers/scsi/mvsas/mv_sas.c 1304:mvs_I_T_nexus_reset for > device[0]:rc= 0 > [ 515.321226] sas: I_T 2bad2bad2bad2bad recovered > [ 515.321243] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 3 tries: > 1 > [ 515.337273] sd 0:0:0:0: [sdb] tag#8 FAILED Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=81s > [ 515.337281] sd 0:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 11 77 78 98 00 04 > 00 00 > [ 515.337283] I/O error, dev sdb, sector 293042328 op 0x0:(READ) flags > 0x4000 phys_seg 8 prio class 2 > [ 515.337299] sd 0:0:0:0: [sdb] tag#9 FAILED Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=81s > [ 515.337303] sd 0:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 11 77 7c 98 00 04 > 00 00 > [ 515.337305] I/O error, dev sdb, sector 293043352 op 0x0:(READ) flags > 0x4000 phys_seg 8 prio class 2 > [ 515.337315] sd 0:0:0:0: [sdb] tag#10 FAILED Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=81s > [ 515.337318] sd 0:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 11 77 80 98 00 > 04 00 00 > [ 515.337320] I/O error, dev sdb, sector 293044376 op 0x0:(READ) flags > 0x4000 phys_seg 9 prio class 2 > [ 515.710666] drivers/scsi/mvsas/mv_sas.c 1099:set wide port phy map 2 > [ 515.710714] sas: sas_form_port: phy1 belongs to port0 already(1)! > [ 519.721300] drivers/scsi/mvsas/mv_sas.c 1690:Release slot [1] tag[1], > task [00000000d0d28957]: > [ 521.822694] drivers/scsi/mvsas/mv_sas.c 1099:set wide port phy map 2 > [ 521.822702] sas: sas_form_port: phy1 belongs to port0 already(1)! Can you reproduce above on latest mainline (currently v6.6-rc7)? -- You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
