Folkert van Heusden <folkert@xxxxxxxxxxxxxx> writes: > Hi, > > Maybe it is a nice enhancement for make menuconfig to more explicitly > give a pop-up or so when someone selects for example a sata controller > while no 'scsi-disk' support was selected? This has also bitten me one or two times. A reasonable way would be to just select SD automatically for !EMBEDDED Here's a patch: -Andi Select BLK_DEV_SD for all SCSI/libata drivers This avoid a common user mistake. Signed-off-by: Andi Kleen <ak@xxxxxxx> Index: linux-2.6.23-rc1-misc/drivers/ata/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/ata/Kconfig +++ linux-2.6.23-rc1-misc/drivers/ata/Kconfig @@ -42,6 +42,7 @@ config ATA_ACPI config SATA_AHCI tristate "AHCI SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for AHCI Serial ATA. @@ -50,6 +51,7 @@ config SATA_AHCI config SATA_SVW tristate "ServerWorks Frodo / Apple K2 SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Broadcom/Serverworks/Apple K2 @@ -59,6 +61,7 @@ config SATA_SVW config ATA_PIIX tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for ICH5/6/7/8 Serial ATA @@ -69,6 +72,7 @@ config ATA_PIIX config SATA_MV tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the Marvell Serial ATA family. @@ -78,6 +82,7 @@ config SATA_MV config SATA_NV tristate "NVIDIA SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for NVIDIA Serial ATA. @@ -86,6 +91,7 @@ config SATA_NV config PDC_ADMA tristate "Pacific Digital ADMA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Pacific Digital ADMA controllers @@ -94,6 +100,7 @@ config PDC_ADMA config SATA_QSTOR tristate "Pacific Digital SATA QStor support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Pacific Digital Serial ATA QStor. @@ -102,6 +109,7 @@ config SATA_QSTOR config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Promise Serial ATA TX2/TX4. @@ -110,6 +118,7 @@ config SATA_PROMISE config SATA_SX4 tristate "Promise SATA SX4 support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -118,6 +127,7 @@ config SATA_SX4 config SATA_SIL tristate "Silicon Image SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Silicon Image Serial ATA. @@ -126,6 +136,7 @@ config SATA_SIL config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Silicon Image 3124/3132 Serial ATA. @@ -134,6 +145,7 @@ config SATA_SIL24 config SATA_SIS tristate "SiS 964/965/966/180 SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI select PATA_SIS help @@ -145,6 +157,7 @@ config SATA_SIS config SATA_ULI tristate "ULi Electronics SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for ULi Electronics SATA. @@ -153,6 +166,7 @@ config SATA_ULI config SATA_VIA tristate "VIA SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for VIA Serial ATA. @@ -161,6 +175,7 @@ config SATA_VIA config SATA_VITESSE tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. @@ -169,12 +184,14 @@ config SATA_VITESSE config SATA_INIC162X tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for Initio 162x Serial ATA. config PATA_ALI tristate "ALi PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the ALi ATA interfaces @@ -184,6 +201,7 @@ config PATA_ALI config PATA_AMD tristate "AMD/NVidia PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the AMD and NVidia PATA @@ -193,6 +211,7 @@ config PATA_AMD config PATA_ARTOP tristate "ARTOP 6210/6260 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for ARTOP PATA controllers. @@ -201,6 +220,7 @@ config PATA_ARTOP config PATA_ATIIXP tristate "ATI PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the ATI ATA interfaces @@ -210,6 +230,7 @@ config PATA_ATIIXP config PATA_CMD640_PCI tristate "CMD640 PCI PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -220,6 +241,7 @@ config PATA_CMD640_PCI config PATA_CMD64X tristate "CMD64x PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI&& EXPERIMENTAL help This option enables support for the CMD64x series chips @@ -229,6 +251,7 @@ config PATA_CMD64X config PATA_CS5520 tristate "CS5510/5520 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the Cyrix 5510/5520 @@ -238,6 +261,7 @@ config PATA_CS5520 config PATA_CS5530 tristate "CS5530 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the Cyrix/NatSemi/AMD CS5530 @@ -247,6 +271,7 @@ config PATA_CS5530 config PATA_CS5535 tristate "CS5535 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && X86 && !X86_64 && EXPERIMENTAL help This option enables support for the NatSemi/AMD CS5535 @@ -256,6 +281,7 @@ config PATA_CS5535 config PATA_CYPRESS tristate "Cypress CY82C693 PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the Cypress/Contaq CY82C693 @@ -265,6 +291,7 @@ config PATA_CYPRESS config PATA_EFAR tristate "EFAR SLC90E66 support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the EFAR SLC90E66 @@ -274,6 +301,7 @@ config PATA_EFAR config ATA_GENERIC tristate "Generic ATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for generic BIOS configured @@ -283,6 +311,7 @@ config ATA_GENERIC config PATA_HPT366 tristate "HPT 366/368 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the HPT 366 and 368 @@ -292,6 +321,7 @@ config PATA_HPT366 config PATA_HPT37X tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the majority of the later HPT @@ -301,6 +331,7 @@ config PATA_HPT37X config PATA_HPT3X2N tristate "HPT 372N/302N PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -310,6 +341,7 @@ config PATA_HPT3X2N config PATA_HPT3X3 tristate "HPT 343/363 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the HPT 343/363 @@ -327,6 +359,7 @@ config PATA_HPT3X3_DMA config PATA_ISAPNP tristate "ISA Plug and Play PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on EXPERIMENTAL && ISAPNP help This option enables support for ISA plug & play ATA @@ -336,6 +369,7 @@ config PATA_ISAPNP config PATA_IT821X tristate "IT8211/2 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the ITE 8211 and 8212 @@ -346,6 +380,7 @@ config PATA_IT821X config PATA_IT8213 tristate "IT8213 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the ITE 821 PATA @@ -355,6 +390,7 @@ config PATA_IT8213 config PATA_JMICRON tristate "JMicron PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help Enable support for the JMicron IDE controller, via the new @@ -364,6 +400,7 @@ config PATA_JMICRON config PATA_LEGACY tristate "Legacy ISA PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on ISA && EXPERIMENTAL help This option enables support for ISA/VLB bus legacy PATA @@ -373,6 +410,7 @@ config PATA_LEGACY config PATA_TRIFLEX tristate "Compaq Triflex PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help Enable support for the Compaq 'Triflex' IDE controller as found @@ -382,6 +420,7 @@ config PATA_TRIFLEX config PATA_MARVELL tristate "Marvell PATA support via legacy mode" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables limited support for the Marvell 88SE6145 ATA @@ -391,6 +430,7 @@ config PATA_MARVELL config PATA_MPC52xx tristate "Freescale MPC52xx SoC internal IDE" + select BLK_DEV_SD if !EMBEDDED depends on PPC_MPC52xx help This option enables support for integrated IDE controller @@ -400,6 +440,7 @@ config PATA_MPC52xx config PATA_MPIIX tristate "Intel PATA MPIIX support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for MPIIX PATA support. @@ -408,6 +449,7 @@ config PATA_MPIIX config PATA_OLDPIIX tristate "Intel PATA old PIIX support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for early PIIX PATA support. @@ -416,6 +458,7 @@ config PATA_OLDPIIX config PATA_NETCELL tristate "NETCELL Revolution RAID support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the Netcell Revolution RAID @@ -425,6 +468,7 @@ config PATA_NETCELL config PATA_NS87410 tristate "Nat Semi NS87410 PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the National Semiconductor @@ -434,6 +478,7 @@ config PATA_NS87410 config PATA_OPTI tristate "OPTI621/6215 PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables full PIO support for the early Opti ATA @@ -443,6 +488,7 @@ config PATA_OPTI config PATA_OPTIDMA tristate "OPTI FireStar PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables DMA/PIO support for the later OPTi @@ -462,6 +508,7 @@ config PATA_PCMCIA config PATA_PDC_OLD tristate "Older Promise PATA controller support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the Promise 20246, 20262, 20263, @@ -471,12 +518,14 @@ config PATA_PDC_OLD config PATA_QDI tristate "QDI VLB PATA support" + select BLK_DEV_SD if !EMBEDDED depends on ISA help Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS tristate "RADISYS 82600 PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -486,6 +535,7 @@ config PATA_RADISYS config PATA_RZ1000 tristate "PC Tech RZ1000 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables basic support for the PC Tech RZ1000/1 @@ -495,6 +545,7 @@ config PATA_RZ1000 config PATA_SC1200 tristate "SC1200 PATA support (Very Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for the NatSemi/AMD SC1200 SoC @@ -504,6 +555,7 @@ config PATA_SC1200 config PATA_SERVERWORKS tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the Serverworks OSB4/CSB5/CSB6 and @@ -513,6 +565,7 @@ config PATA_SERVERWORKS config PATA_PDC2027X tristate "Promise PATA 2027x support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. @@ -521,6 +574,7 @@ config PATA_PDC2027X config PATA_SIL680 tristate "CMD / Silicon Image 680 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for CMD / Silicon Image 680 PATA. @@ -529,6 +583,7 @@ config PATA_SIL680 config PATA_SIS tristate "SiS PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && EXPERIMENTAL help This option enables support for SiS PATA controllers @@ -537,6 +592,7 @@ config PATA_SIS config PATA_VIA tristate "VIA PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for the VIA PATA interfaces @@ -546,6 +602,7 @@ config PATA_VIA config PATA_WINBOND tristate "Winbond SL82C105 PATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI help This option enables support for SL82C105 PATA devices found in the @@ -555,6 +612,7 @@ config PATA_WINBOND config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" + select BLK_DEV_SD if !EMBEDDED depends on ISA && EXPERIMENTAL help Support for the Winbond W83759A controller on Vesa Local Bus @@ -562,6 +620,7 @@ config PATA_WINBOND_VLB config PATA_PLATFORM tristate "Generic platform device PATA support" + select BLK_DEV_SD if !EMBEDDED depends on EMBEDDED || ARCH_RPC help This option enables support for generic directly connected ATA @@ -571,6 +630,7 @@ config PATA_PLATFORM config PATA_ICSIDE tristate "Acorn ICS PATA support" + select BLK_DEV_SD if !EMBEDDED depends on ARM && ARCH_ACORN help On Acorn systems, say Y here if you wish to use the ICS PATA @@ -579,6 +639,7 @@ config PATA_ICSIDE config PATA_IXP4XX_CF tristate "IXP4XX Compact Flash support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_IXP4XX help This option enables support for a Compact Flash connected on @@ -589,6 +650,7 @@ config PATA_IXP4XX_CF config PATA_SCC tristate "Toshiba's Cell Reference Set IDE support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && PPC_CELLEB help This option enables support for the built-in IDE controller on Index: linux-2.6.23-rc1-misc/drivers/scsi/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/Kconfig @@ -305,6 +305,7 @@ config ISCSI_TCP select CRYPTO_MD5 select CRYPTO_CRC32C select SCSI_ISCSI_ATTRS + select BLK_DEV_SD if !EMBEDDED help The iSCSI Driver provides a host with the ability to access storage through an IP network. The driver uses the iSCSI protocol to transport @@ -325,6 +326,7 @@ config ISCSI_TCP config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_IP22 && SCSI + select BLK_DEV_SD if !EMBEDDED help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. @@ -332,16 +334,19 @@ config SGIWD93_SCSI config SCSI_DECNCR tristate "DEC NCR53C94 Scsi Driver" depends on MACH_DECSTATION && SCSI && TC + select BLK_DEV_SD if !EMBEDDED help Say Y here to support the NCR53C94 SCSI controller chips on IOASIC based TURBOchannel DECstations and TURBOchannel PMAZ-A cards. config SCSI_DECSII tristate "DEC SII Scsi Driver" + select BLK_DEV_SD if !EMBEDDED depends on MACH_DECSTATION && SCSI && 32BIT config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help 3ware is the only hardware ATA-Raid product in Linux to date. @@ -355,6 +360,7 @@ config BLK_DEV_3W_XXXX_RAID config SCSI_3W_9XXX tristate "3ware 9xxx SATA-RAID support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help This driver supports the 9000 series 3ware SATA-RAID cards. @@ -366,6 +372,7 @@ config SCSI_3W_9XXX config SCSI_7000FASST tristate "7000FASST SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI && ISA_DMA_API help This driver supports the Western Digital 7000 SCSI host adapter @@ -377,6 +384,7 @@ config SCSI_7000FASST config SCSI_ACARD tristate "ACARD SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help This driver supports the ACARD SCSI host adapter. @@ -387,6 +395,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT + select BLK_DEV_SD if !EMBEDDED select SCSI_SPI_ATTRS ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 @@ -402,6 +411,7 @@ config SCSI_AHA152X config SCSI_AHA1542 tristate "Adaptec AHA1542 support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI && ISA_DMA_API ---help--- This is support for a SCSI host adapter. It is explained in section @@ -416,6 +426,7 @@ config SCSI_AHA1542 config SCSI_AHA1740 tristate "Adaptec AHA1740 support" + select BLK_DEV_SD if !EMBEDDED depends on EISA && SCSI ---help--- This is support for a SCSI host adapter. It is explained in section @@ -429,6 +440,7 @@ config SCSI_AHA1740 config SCSI_AACRAID tristate "Adaptec AACRAID support" + select BLK_DEV_SD if !EMBEDDED depends on SCSI && PCI help This driver supports a variety of Dell, HP, Adaptec, IBM and @@ -443,6 +455,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic config SCSI_AIC7XXX_OLD tristate "Adaptec AIC7xxx support (old driver)" + select BLK_DEV_SD if !EMBEDDED depends on (ISA || EISA || PCI ) && SCSI help WARNING This driver is an older aic7xxx driver and is no longer @@ -487,6 +500,7 @@ source "drivers/scsi/aic94xx/Kconfig" # All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " + select BLK_DEV_SD if !EMBEDDED depends on !64BIT && SCSI && PCI && VIRT_TO_BUS help This driver supports all of Adaptec's I2O based RAID controllers as @@ -501,6 +515,7 @@ config SCSI_ADVANSYS depends on SCSI depends on ISA || EISA || PCI depends on BROKEN || X86_32 + select BLK_DEV_SD if !EMBEDDED help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in @@ -512,6 +527,7 @@ config SCSI_ADVANSYS config SCSI_IN2000 tristate "Always IN2000 SCSI support" depends on ISA && SCSI + select BLK_DEV_SD if !EMBEDDED help This is support for an ISA bus SCSI host adapter. You'll find more information in <file:Documentation/scsi/in2000.txt>. If it doesn't work @@ -524,6 +540,7 @@ config SCSI_IN2000 config SCSI_ARCMSR tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support" depends on PCI && SCSI + select BLK_DEV_SD if !EMBEDDED help This driver supports all of ARECA's SATA RAID controller cards. This is an ARECA-maintained driver by Erich Chen. @@ -540,6 +557,7 @@ source "drivers/scsi/megaraid/Kconfig.me config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" depends on SCSI && PCI + select BLK_DEV_SD if !EMBEDDED help This option enables support for HighPoint RocketRAID 3xxx controllers. @@ -549,6 +567,7 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS ---help--- This is support for BusLogic MultiMaster and FlashPoint SCSI Host @@ -563,6 +582,7 @@ config SCSI_BUSLOGIC config SCSI_OMIT_FLASHPOINT bool "Omit FlashPoint support" depends on SCSI_BUSLOGIC + select BLK_DEV_SD if !EMBEDDED help This option allows you to omit the FlashPoint support from the BusLogic SCSI driver. The FlashPoint SCCB Manager code is @@ -573,6 +593,7 @@ config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI select SCSI_SPI_ATTRS + select BLK_DEV_SD if !EMBEDDED help This is support for Domex DMX3191D SCSI Host Adapters. @@ -583,6 +604,7 @@ config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select BLK_DEV_SD if !EMBEDDED help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -595,6 +617,7 @@ config SCSI_DTC3280 config SCSI_EATA tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API + select BLK_DEV_SD if !EMBEDDED ---help--- This driver supports all EATA/DMA-compliant SCSI host adapters. DPT ISA and all EISA I/O addresses are probed looking for the "EATA" @@ -656,6 +679,7 @@ config SCSI_EATA_PIO config SCSI_FUTURE_DOMAIN tristate "Future Domain 16xx SCSI/AHA-2920A support" + select BLK_DEV_SD if !EMBEDDED depends on (ISA || PCI) && SCSI ---help--- This is support for Future Domain's 16-bit SCSI host adapters @@ -675,6 +699,7 @@ config SCSI_FUTURE_DOMAIN config SCSI_FD_MCS tristate "Future Domain MCS-600/700 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on MCA_LEGACY && SCSI ---help--- This is support for Future Domain MCS 600/700 MCA SCSI adapters. @@ -688,6 +713,7 @@ config SCSI_FD_MCS config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" + select BLK_DEV_SD if !EMBEDDED depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API ---help--- Formerly called GDT SCSI Disk Array Controller Support. @@ -702,6 +728,7 @@ config SCSI_GDTH config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI select SCSI_SPI_ATTRS ---help--- @@ -722,6 +749,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI select SCSI_SPI_ATTRS ---help--- @@ -748,6 +776,7 @@ config SCSI_GENERIC_NCR53C400 config SCSI_IBMMCA tristate "IBMMCA SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on MCA && SCSI ---help--- This is support for the IBM SCSI adapter found in many of the PS/2 @@ -818,6 +847,7 @@ config IBMMCA_SCSI_DEV_RESET config SCSI_IPS tristate "IBM ServeRAID support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI ---help--- This is support for the IBM ServeRAID hardware RAID controllers. @@ -831,6 +861,7 @@ config SCSI_IPS config SCSI_IBMVSCSI tristate "IBM Virtual SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on PPC_PSERIES || PPC_ISERIES help This is the IBM POWER Virtual SCSI Client @@ -840,6 +871,7 @@ config SCSI_IBMVSCSI config SCSI_IBMVSCSIS tristate "IBM Virtual SCSI Server support" + select BLK_DEV_SD if !EMBEDDED depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP help This is the SRP target driver for IBM pSeries virtual environments. @@ -854,6 +886,7 @@ config SCSI_IBMVSCSIS config SCSI_INITIO tristate "Initio 9100U(W) support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help This is support for the Initio 91XXU(W) SCSI host adapter. Please @@ -865,6 +898,7 @@ config SCSI_INITIO config SCSI_INIA100 tristate "Initio INI-A100U2W support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help This is support for the Initio INI-A100U2W SCSI host adapter. @@ -876,6 +910,7 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" + select BLK_DEV_SD if !EMBEDDED depends on SCSI && PARPORT_PC ---help--- This driver supports older versions of IOMEGA's parallel port ZIP @@ -903,6 +938,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" + select BLK_DEV_SD if !EMBEDDED depends on SCSI && PARPORT_PC ---help--- This driver supports newer versions of IOMEGA's parallel port ZIP @@ -959,6 +995,7 @@ config SCSI_IZIP_SLOW_CTR config SCSI_NCR53C406A tristate "NCR53c406a SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI help This is support for the NCR53c406a SCSI host adapter. For user @@ -971,6 +1008,7 @@ config SCSI_NCR53C406A config SCSI_NCR_D700 tristate "NCR Dual 700 MCA SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on MCA && SCSI select SCSI_SPI_ATTRS help @@ -983,6 +1021,7 @@ config SCSI_NCR_D700 config SCSI_LASI700 tristate "HP Lasi SCSI support for 53c700/710" + select BLK_DEV_SD if !EMBEDDED depends on GSC && SCSI select SCSI_SPI_ATTRS help @@ -992,6 +1031,7 @@ config SCSI_LASI700 config SCSI_SNI_53C710 tristate "SNI RM SCSI support for 53c710" + select BLK_DEV_SD if !EMBEDDED depends on SNI_RM && SCSI select SCSI_SPI_ATTRS select 53C700_LE_ON_BE @@ -1006,6 +1046,7 @@ config 53C700_LE_ON_BE config SCSI_STEX tristate "Promise SuperTrak EX Series support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI ---help--- This driver supports Promise SuperTrak EX series storage controllers. @@ -1023,6 +1064,7 @@ config 53C700_BE_BUS config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI select SCSI_SPI_ATTRS ---help--- @@ -1090,6 +1132,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && ATA select FW_LOADER ---help--- @@ -1117,6 +1160,7 @@ config SCSI_IPR_DUMP config SCSI_ZALON tristate "Zalon SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on GSC && SCSI select SCSI_SPI_ATTRS help @@ -1128,6 +1172,7 @@ config SCSI_ZALON config SCSI_NCR_Q720 tristate "NCR Quad 720 MCA SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on MCA && SCSI select SCSI_SPI_ATTRS help @@ -1227,6 +1272,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT config SCSI_MCA_53C9X tristate "NCR MCA 53C9x SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP help Some MicroChannel machines, notably the NCR 35xx line, use a SCSI @@ -1238,6 +1284,7 @@ config SCSI_MCA_53C9X config SCSI_PAS16 tristate "PAS16 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI select SCSI_SPI_ATTRS ---help--- @@ -1263,6 +1310,7 @@ config SCSI_PSI240I config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI ---help--- This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic @@ -1291,6 +1339,7 @@ config SCSI_QLOGIC_FC_FIRMWARE config SCSI_QLOGIC_1280 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter. @@ -1300,6 +1349,7 @@ config SCSI_QLOGIC_1280 config SCSI_QLOGICPTI tristate "PTI Qlogic, ISP Driver" + select BLK_DEV_SD if !EMBEDDED depends on SBUS && SCSI help This driver supports SBUS SCSI controllers from PTI or QLogic. These @@ -1315,6 +1365,7 @@ source "drivers/scsi/qla4xxx/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI select SCSI_FC_ATTRS help @@ -1323,6 +1374,7 @@ config SCSI_LPFC config SCSI_SEAGATE tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on X86 && ISA && SCSI ---help--- These are 8-bit SCSI controllers; the ST-01 is also supported by @@ -1337,6 +1389,7 @@ config SCSI_SEAGATE # definitely looks not 64bit safe: config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" + select BLK_DEV_SD if !EMBEDDED depends on (EISA || MCA) && SCSI select SCSI_SPI_ATTRS ---help--- @@ -1346,6 +1399,7 @@ config SCSI_SIM710 config SCSI_SYM53C416 tristate "Symbios 53c416 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI ---help--- This is support for the sym53c416 SCSI host adapter, the SCSI @@ -1364,6 +1418,7 @@ config SCSI_SYM53C416 config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && EXPERIMENTAL ---help--- This driver supports PCI SCSI host adapters based on the ASIC @@ -1379,6 +1434,7 @@ config SCSI_DC395x config SCSI_DC390T tristate "Tekram DC390(T) and Am53/79C974 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI ---help--- This driver supports PCI SCSI host adapters based on the Am53C974A @@ -1395,6 +1451,7 @@ config SCSI_DC390T config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI select SCSI_SPI_ATTRS ---help--- @@ -1411,6 +1468,7 @@ config SCSI_T128 config SCSI_U14_34F tristate "UltraStor 14F/34F support" + select BLK_DEV_SD if !EMBEDDED depends on ISA && SCSI && ISA_DMA_API ---help--- This is support for the UltraStor 14F and 34F SCSI-2 host adapters. @@ -1460,6 +1518,7 @@ config SCSI_U14_34F_MAX_TAGS config SCSI_ULTRASTOR tristate "UltraStor SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on X86 && ISA && SCSI ---help--- This is support for the UltraStor 14F, 24F and 34F SCSI-2 host @@ -1477,6 +1536,7 @@ config SCSI_ULTRASTOR config SCSI_NSP32 tristate "Workbit NinjaSCSI-32Bi/UDE support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && !64BIT help This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus @@ -1501,6 +1561,7 @@ config SCSI_DEBUG config SCSI_MESH tristate "MESH (Power Mac internal SCSI) support" + select BLK_DEV_SD if !EMBEDDED depends on PPC32 && PPC_PMAC && SCSI help Many Power Macintoshes and clones have a MESH (Macintosh Enhanced @@ -1555,6 +1616,7 @@ config JAZZ_ESP config A3000_SCSI tristate "A3000 WD33C93A support" + select BLK_DEV_SD if !EMBEDDED depends on AMIGA && SCSI help If you have an Amiga 3000 and have SCSI devices connected to the @@ -1565,6 +1627,7 @@ config A3000_SCSI config A2091_SCSI tristate "A2091/A590 WD33C93A support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have a Commodore A2091 SCSI controller, say Y. Otherwise, @@ -1575,6 +1638,7 @@ config A2091_SCSI config GVP11_SCSI tristate "GVP Series II WD33C93A support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI ---help--- If you have a Great Valley Products Series II SCSI controller, @@ -1588,6 +1652,7 @@ config GVP11_SCSI config CYBERSTORM_SCSI tristate "CyberStorm SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have an Amiga with an original (MkI) Phase5 Cyberstorm @@ -1596,6 +1661,7 @@ config CYBERSTORM_SCSI config CYBERSTORMII_SCSI tristate "CyberStorm Mk II SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board @@ -1604,6 +1670,7 @@ config CYBERSTORMII_SCSI config BLZ2060_SCSI tristate "Blizzard 2060 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have an Amiga with a Phase5 Blizzard 2060 accelerator board @@ -1612,6 +1679,7 @@ config BLZ2060_SCSI config BLZ1230_SCSI tristate "Blizzard 1230IV/1260 SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard @@ -1620,6 +1688,7 @@ config BLZ1230_SCSI config FASTLANE_SCSI tristate "Fastlane SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI help If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use @@ -1627,6 +1696,7 @@ config FASTLANE_SCSI config SCSI_A4000T tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on AMIGA && SCSI && EXPERIMENTAL select SCSI_SPI_ATTRS help @@ -1638,6 +1708,7 @@ config SCSI_A4000T config SCSI_ZORRO7XX tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI && EXPERIMENTAL select SCSI_SPI_ATTRS help @@ -1654,6 +1725,7 @@ config SCSI_ZORRO7XX config OKTAGON_SCSI tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on ZORRO && SCSI && EXPERIMENTAL help If you have the BSC Oktagon SCSI disk controller for the Amiga, say @@ -1663,6 +1735,7 @@ config OKTAGON_SCSI config ATARI_SCSI tristate "Atari native SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ATARI && SCSI select SCSI_SPI_ATTRS ---help--- @@ -1715,6 +1788,7 @@ config MAC_SCSI config SCSI_MAC_ESP tristate "Macintosh NCR53c9[46] SCSI" + select BLK_DEV_SD if !EMBEDDED depends on MAC && SCSI help This is the NCR 53c9x SCSI controller found on most of the 68040 @@ -1735,6 +1809,7 @@ config MVME147_SCSI config MVME16x_SCSI tristate "NCR53C710 SCSI driver for MVME16x" + select BLK_DEV_SD if !EMBEDDED depends on MVME16x && SCSI select SCSI_SPI_ATTRS help @@ -1744,6 +1819,7 @@ config MVME16x_SCSI config BVME6000_SCSI tristate "NCR53C710 SCSI driver for BVME6000" + select BLK_DEV_SD if !EMBEDDED depends on BVME6000 && SCSI select SCSI_SPI_ATTRS help @@ -1753,6 +1829,7 @@ config BVME6000_SCSI config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" + select BLK_DEV_SD if !EMBEDDED depends on SUN3 && SCSI select SCSI_SPI_ATTRS help @@ -1771,6 +1848,7 @@ config SUN3X_ESP config SCSI_SUNESP tristate "Sparc ESP Scsi Driver" + select BLK_DEV_SD if !EMBEDDED depends on SBUS && SCSI select SCSI_SPI_ATTRS help @@ -1782,6 +1860,7 @@ config SCSI_SUNESP config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" + select BLK_DEV_SD if !EMBEDDED depends on S390 && QDIO && SCSI select SCSI_FC_ATTRS help @@ -1796,6 +1875,7 @@ config ZFCP config SCSI_SRP tristate "SCSI RDMA Protocol helper library" + select BLK_DEV_SD if !EMBEDDED depends on SCSI && PCI select SCSI_TGT help Index: linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic79xx =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic7xxx/Kconfig.aic79xx +++ linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic79xx @@ -4,6 +4,7 @@ # config SCSI_AIC79XX tristate "Adaptec AIC79xx U320 support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI select SCSI_SPI_ATTRS help Index: linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic7xxx =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic7xxx/Kconfig.aic7xxx +++ linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic7xxx @@ -4,6 +4,7 @@ # config SCSI_AIC7XXX tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)" + select BLK_DEV_SD if !EMBEDDED depends on (PCI || EISA) && SCSI select SCSI_SPI_ATTRS ---help--- Index: linux-2.6.23-rc1-misc/drivers/scsi/aic94xx/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic94xx/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/aic94xx/Kconfig @@ -26,6 +26,7 @@ config SCSI_AIC94XX tristate "Adaptec AIC94xx SAS/SATA support" + select BLK_DEV_SD if !EMBEDDED depends on PCI select SCSI_SAS_LIBSAS select FW_LOADER Index: linux-2.6.23-rc1-misc/drivers/scsi/arm/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/arm/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/arm/Kconfig @@ -3,6 +3,7 @@ # config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && SCSI && BROKEN select SCSI_SPI_ATTRS help @@ -32,6 +33,7 @@ config SCSI_ACORNSCSI_SYNC config SCSI_ARXESCSI tristate "ARXE SCSI support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && SCSI help Around 1991, Arxe Systems Limited released a high density floppy @@ -44,6 +46,7 @@ config SCSI_ARXESCSI config SCSI_CUMANA_2 tristate "CumanaSCSI II support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && SCSI help This enables support for the Cumana SCSI II card. If you have an @@ -51,6 +54,7 @@ config SCSI_CUMANA_2 config SCSI_EESOXSCSI tristate "EESOX support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && SCSI help This enables support for the EESOX SCSI card. If you have an Acorn @@ -58,6 +62,7 @@ config SCSI_EESOXSCSI config SCSI_POWERTECSCSI tristate "PowerTec support" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && SCSI help This enables support for the Powertec SCSI card on Acorn systems. If @@ -68,6 +73,7 @@ comment "The following drivers are not f config SCSI_CUMANA_1 tristate "CumanaSCSI I support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && EXPERIMENTAL && SCSI select SCSI_SPI_ATTRS help @@ -76,6 +82,7 @@ config SCSI_CUMANA_1 config SCSI_ECOSCSI tristate "EcoScsi support (EXPERIMENTAL)" + select BLK_DEV_SD if !EMBEDDED depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI select SCSI_SPI_ATTRS help Index: linux-2.6.23-rc1-misc/drivers/scsi/megaraid/Kconfig.megaraid =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/megaraid/Kconfig.megaraid +++ linux-2.6.23-rc1-misc/drivers/scsi/megaraid/Kconfig.megaraid @@ -6,6 +6,7 @@ config MEGARAID_NEWGEN config MEGARAID_MM tristate "LSI Logic Management Module (New Driver)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && MEGARAID_NEWGEN help Management Module provides ioctl, sysfs support for LSI Logic @@ -16,6 +17,7 @@ config MEGARAID_MM config MEGARAID_MAILBOX tristate "LSI Logic MegaRAID Driver (New Driver)" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && MEGARAID_MM help List of supported controllers @@ -77,6 +79,7 @@ config MEGARAID_LEGACY config MEGARAID_SAS tristate "LSI Logic MegaRAID SAS RAID Module" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI help Module for LSI Logic's SAS based RAID controllers. Index: linux-2.6.23-rc1-misc/drivers/scsi/pcmcia/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/pcmcia/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/pcmcia/Kconfig @@ -10,6 +10,7 @@ if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCI config PCMCIA_AHA152X tristate "Adaptec AHA152X PCMCIA support" + select BLK_DEV_SD if !EMBEDDED depends on !64BIT select SCSI_SPI_ATTRS help @@ -21,6 +22,7 @@ config PCMCIA_AHA152X config PCMCIA_FDOMAIN tristate "Future Domain PCMCIA support" + select BLK_DEV_SD if !EMBEDDED help Say Y here if you intend to attach this type of PCMCIA SCSI host adapter to your computer. @@ -30,6 +32,7 @@ config PCMCIA_FDOMAIN config PCMCIA_NINJA_SCSI tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support" + select BLK_DEV_SD if !EMBEDDED depends on !64BIT help If you intend to attach this type of PCMCIA SCSI host adapter to @@ -64,6 +67,7 @@ config PCMCIA_NINJA_SCSI config PCMCIA_QLOGIC tristate "Qlogic PCMCIA support" + select BLK_DEV_SD if !EMBEDDED help Say Y here if you intend to attach this type of PCMCIA SCSI host adapter to your computer. @@ -73,6 +77,7 @@ config PCMCIA_QLOGIC config PCMCIA_SYM53C500 tristate "Symbios 53c500 PCMCIA support" + select BLK_DEV_SD if !EMBEDDED help Say Y here if you have a New Media Bus Toaster or other PCMCIA SCSI adapter based on the Symbios 53c500 controller. Index: linux-2.6.23-rc1-misc/drivers/scsi/qla2xxx/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/qla2xxx/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/qla2xxx/Kconfig @@ -1,5 +1,6 @@ config SCSI_QLA_FC tristate "QLogic QLA2XXX Fibre Channel Support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI select SCSI_FC_ATTRS select FW_LOADER Index: linux-2.6.23-rc1-misc/drivers/scsi/qla4xxx/Kconfig =================================================================== --- linux-2.6.23-rc1-misc.orig/drivers/scsi/qla4xxx/Kconfig +++ linux-2.6.23-rc1-misc/drivers/scsi/qla4xxx/Kconfig @@ -1,5 +1,6 @@ config SCSI_QLA_ISCSI tristate "QLogic ISP4XXX host adapter family support" + select BLK_DEV_SD if !EMBEDDED depends on PCI && SCSI && NET select SCSI_ISCSI_ATTRS ---help--- - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
