From: Swen Schillig <swen@xxxxxxxxxxxx>
Cleanup the whitepace from the entire zfcp driver to prevent
to have those changes in future feature or function patches.
Signed-off-by: Swen Schillig <swen@xxxxxxxxxxxx>
---
drivers/s390/scsi/zfcp_aux.c | 4 -
drivers/s390/scsi/zfcp_def.h | 46 ++++++------
drivers/s390/scsi/zfcp_erp.c | 134 ++++++++++++++++++------------------
drivers/s390/scsi/zfcp_ext.h | 30 ++++----
drivers/s390/scsi/zfcp_fsf.c | 40 +++++-----
drivers/s390/scsi/zfcp_fsf.h | 30 ++++----
drivers/s390/scsi/zfcp_qdio.c | 7 -
drivers/s390/scsi/zfcp_scsi.c | 36 ++++-----
drivers/s390/scsi/zfcp_sysfs_unit.c | 4 -
9 files changed, 165 insertions(+), 166 deletions(-)
Index: HEAD/drivers/s390/scsi/zfcp_aux.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_aux.c
+++ HEAD/drivers/s390/scsi/zfcp_aux.c
@@ -891,7 +891,7 @@ zfcp_unit_dequeue(struct zfcp_unit *unit
/*
* Allocates a combined QTCB/fsf_req buffer for erp actions and fcp/SCSI
* commands.
- * It also genrates fcp-nameserver request/response buffer and unsolicited
+ * It also genrates fcp-nameserver request/response buffer and unsolicited
* status read fsf_req buffers.
*
* locks: must only be called with zfcp_data.config_sema taken
@@ -982,7 +982,7 @@ zfcp_adapter_enqueue(struct ccw_device *
struct zfcp_adapter *adapter;
/*
- * Note: It is safe to release the list_lock, as any list changes
+ * Note: It is safe to release the list_lock, as any list changes
* are protected by the config_sema, which must be held to get here
*/
Index: HEAD/drivers/s390/scsi/zfcp_def.h
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_def.h
+++ HEAD/drivers/s390/scsi/zfcp_def.h
@@ -1,23 +1,23 @@
-/*
+/*
* This file is part of the zfcp device driver for
* FCP adapters for IBM System z9 and zSeries.
*
* (C) Copyright IBM Corp. 2002, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
#ifndef ZFCP_DEF_H
#define ZFCP_DEF_H
@@ -90,7 +90,7 @@ zfcp_address_to_sg(void *address, struct
#define ZFCP_DEVICE_TYPE 0x1732
#define ZFCP_DEVICE_MODEL 0x03
#define ZFCP_DEVICE_MODEL_PRIV 0x04
-
+
/* allow as many chained SBALs as are supported by hardware */
#define ZFCP_MAX_SBALS_PER_REQ FSF_MAX_SBALS_PER_REQ
#define ZFCP_MAX_SBALS_PER_CT_REQ FSF_MAX_SBALS_PER_REQ
@@ -508,7 +508,7 @@ struct zfcp_rc_entry {
/*
* this allows removal of logging code by the preprocessor
- * (the most detailed log level still to be compiled in is specified,
+ * (the most detailed log level still to be compiled in is specified,
* higher log levels are removed)
*/
#define ZFCP_LOG_LEVEL_LIMIT ZFCP_LOG_LEVEL_TRACE
@@ -546,7 +546,7 @@ do { \
if (ZFCP_LOG_CHECK(level)) \
_ZFCP_LOG(fmt, ##args); \
} while (0)
-
+
#if ZFCP_LOG_LEVEL_LIMIT < ZFCP_LOG_LEVEL_NORMAL
# define ZFCP_LOG_NORMAL(fmt, args...) do { } while (0)
#else
@@ -583,8 +583,8 @@ do { \
/*************** ADAPTER/PORT/UNIT AND FSF_REQ STATUS FLAGS ******************/
-/*
- * Note, the leftmost status byte is common among adapter, port
+/*
+ * Note, the leftmost status byte is common among adapter, port
* and unit
*/
#define ZFCP_COMMON_FLAGS 0xfff00000
@@ -1007,8 +1007,8 @@ struct zfcp_fsf_req {
u32 fsf_command; /* FSF Command copy */
struct fsf_qtcb *qtcb; /* address of associated QTCB */
u32 seq_no; /* Sequence number of request */
- unsigned long data; /* private data of request */
- struct timer_list timer; /* used for erp or scsi er */
+ unsigned long data; /* private data of request */
+ struct timer_list timer; /* used for erp or scsi er */
struct zfcp_erp_action *erp_action; /* used if this request is
issued on behalf of erp */
mempool_t *pool; /* used if request was alloacted
Index: HEAD/drivers/s390/scsi/zfcp_erp.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_erp.c
+++ HEAD/drivers/s390/scsi/zfcp_erp.c
@@ -1,22 +1,22 @@
-/*
+/*
* This file is part of the zfcp device driver for
* FCP adapters for IBM System z9 and zSeries.
*
* (C) Copyright IBM Corp. 2002, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_ERP
@@ -191,7 +191,7 @@ void zfcp_fsf_start_timer(struct zfcp_fs
}
/*
- * function:
+ * function:
*
* purpose: called if an adapter failed,
* initiates adapter recovery which is done
@@ -228,7 +228,7 @@ zfcp_erp_adapter_reopen_internal(struct
}
/*
- * function:
+ * function:
*
* purpose: Wrappper for zfcp_erp_adapter_reopen_internal
* used to ensure the correct locking
@@ -476,7 +476,7 @@ zfcp_test_link(struct zfcp_port *port)
/*
- * function:
+ * function:
*
* purpose: called if a port failed to be opened normally
* initiates Forced Reopen recovery which is done
@@ -517,7 +517,7 @@ zfcp_erp_port_forced_reopen_internal(str
}
/*
- * function:
+ * function:
*
* purpose: Wrappper for zfcp_erp_port_forced_reopen_internal
* used to ensure the correct locking
@@ -543,7 +543,7 @@ zfcp_erp_port_forced_reopen(struct zfcp_
}
/*
- * function:
+ * function:
*
* purpose: called if a port is to be opened
* initiates Reopen recovery which is done
@@ -612,7 +612,7 @@ zfcp_erp_port_reopen(struct zfcp_port *p
}
/*
- * function:
+ * function:
*
* purpose: called if a unit is to be opened
* initiates Reopen recovery which is done
@@ -704,7 +704,7 @@ static void zfcp_erp_adapter_unblock(str
}
/*
- * function:
+ * function:
*
* purpose: disable I/O,
* return any open requests and clean them up,
@@ -725,7 +725,7 @@ zfcp_erp_port_block(struct zfcp_port *po
}
/*
- * function:
+ * function:
*
* purpose: enable I/O
*
@@ -742,7 +742,7 @@ zfcp_erp_port_unblock(struct zfcp_port *
}
/*
- * function:
+ * function:
*
* purpose: disable I/O,
* return any open requests and clean them up,
@@ -763,7 +763,7 @@ zfcp_erp_unit_block(struct zfcp_unit *un
}
/*
- * function:
+ * function:
*
* purpose: enable I/O
*
@@ -792,7 +792,7 @@ zfcp_erp_action_ready(struct zfcp_erp_ac
}
/*
- * function:
+ * function:
*
* purpose:
*
@@ -967,7 +967,7 @@ static void zfcp_erp_timeout_handler(uns
* zfcp_erp_action_dismiss - dismiss an erp_action
*
* adapter->erp_lock must be held
- *
+ *
* Dismissal of an erp_action is usually required if an erp_action of
* higher priority is generated.
*/
@@ -1005,9 +1005,9 @@ zfcp_erp_thread_setup(struct zfcp_adapte
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns:
*
@@ -1094,7 +1094,7 @@ zfcp_erp_thread(void *data)
}
/*
- * function:
+ * function:
*
* purpose: drives single error recovery action and schedules higher and
* subordinate actions, if necessary
@@ -1206,7 +1206,7 @@ zfcp_erp_strategy(struct zfcp_erp_action
/*
* put this target through the erp mill again if someone has
- * requested to change the status of a target being online
+ * requested to change the status of a target being online
* to offline or the other way around
* (old retval is preserved if nothing has to be done here)
*/
@@ -1228,7 +1228,7 @@ zfcp_erp_strategy(struct zfcp_erp_action
unlock:
write_unlock(&adapter->erp_lock);
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
-
+
if (retval != ZFCP_ERP_CONTINUES)
zfcp_erp_action_cleanup(action, adapter, port, unit, retval);
@@ -1250,9 +1250,9 @@ zfcp_erp_strategy(struct zfcp_erp_action
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_DISMISSED - if action has been dismissed
* retval - otherwise
@@ -1322,7 +1322,7 @@ zfcp_erp_strategy_do_action(struct zfcp_
}
/*
- * function:
+ * function:
*
* purpose: triggers retry of this action after a certain amount of time
* by means of timer provided by erp_action
@@ -1346,7 +1346,7 @@ zfcp_erp_strategy_memwait(struct zfcp_er
return retval;
}
-/*
+/*
* function: zfcp_erp_adapter_failed
*
* purpose: sets the adapter and all underlying devices to ERP_FAILED
@@ -1362,7 +1362,7 @@ zfcp_erp_adapter_failed(struct zfcp_adap
debug_text_event(adapter->erp_dbf, 2, "a_afail");
}
-/*
+/*
* function: zfcp_erp_port_failed
*
* purpose: sets the port and all underlying devices to ERP_FAILED
@@ -1386,7 +1386,7 @@ zfcp_erp_port_failed(struct zfcp_port *p
debug_event(port->adapter->erp_dbf, 2, &port->wwpn, sizeof (wwn_t));
}
-/*
+/*
* function: zfcp_erp_unit_failed
*
* purpose: sets the unit to ERP_FAILED
@@ -1417,7 +1417,7 @@ zfcp_erp_unit_failed(struct zfcp_unit *u
* successfully is reset.
*
* returns: ZFCP_ERP_CONTINUES - action continues (not considered)
- * ZFCP_ERP_SUCCEEDED - action finished successfully
+ * ZFCP_ERP_SUCCEEDED - action finished successfully
* ZFCP_ERP_EXIT - action failed and will not continue
*/
static int
@@ -1646,7 +1646,7 @@ zfcp_erp_schedule_work(struct zfcp_unit
}
/*
- * function:
+ * function:
*
* purpose: remaining things in good cases,
* escalation in bad cases
@@ -1815,7 +1815,7 @@ zfcp_erp_modify_unit_status(struct zfcp_
}
/*
- * function:
+ * function:
*
* purpose: Wrappper for zfcp_erp_port_reopen_all_internal
* used to ensure the correct locking
@@ -1852,9 +1852,9 @@ zfcp_erp_port_reopen_all_internal(struct
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: FIXME
*/
@@ -1871,7 +1871,7 @@ zfcp_erp_unit_reopen_all_internal(struct
}
/*
- * function:
+ * function:
*
* purpose: this routine executes the 'Reopen Adapter' action
* (the entire action is processed synchronously, since
@@ -1908,9 +1908,9 @@ zfcp_erp_adapter_strategy(struct zfcp_er
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_SUCCEEDED - action finished successfully
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -1930,9 +1930,9 @@ zfcp_erp_adapter_strategy_close(struct z
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_SUCCEEDED - action finished successfully
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -1957,7 +1957,7 @@ zfcp_erp_adapter_strategy_open(struct zf
* purpose: allocate the irq associated with this devno and register
* the FSF adapter with the SCSI stack
*
- * returns:
+ * returns:
*/
static int
zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *erp_action, int close)
@@ -2249,7 +2249,7 @@ zfcp_erp_adapter_strategy_open_fsf_statu
}
/*
- * function:
+ * function:
*
* purpose: this routine executes the 'Reopen Physical Port' action
*
@@ -2308,7 +2308,7 @@ zfcp_erp_port_forced_strategy(struct zfc
}
/*
- * function:
+ * function:
*
* purpose: this routine executes the 'Reopen Port' action
*
@@ -2530,7 +2530,7 @@ zfcp_erp_port_strategy_open_nameserver(s
}
/*
- * function:
+ * function:
*
* purpose: makes the erp thread continue with reopen (physical) port
* actions which have been paused until the name server port
@@ -2570,9 +2570,9 @@ zfcp_erp_port_strategy_open_nameserver_w
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2626,9 +2626,9 @@ zfcp_erp_port_strategy_clearstati(struct
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2663,9 +2663,9 @@ zfcp_erp_port_strategy_close(struct zfcp
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2700,9 +2700,9 @@ zfcp_erp_port_strategy_open_port(struct
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2737,7 +2737,7 @@ zfcp_erp_port_strategy_open_common_looku
}
/*
- * function:
+ * function:
*
* purpose: this routine executes the 'Reopen Unit' action
* currently no retries
@@ -2825,9 +2825,9 @@ zfcp_erp_unit_strategy_clearstati(struct
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2865,9 +2865,9 @@ zfcp_erp_unit_strategy_close(struct zfcp
}
/*
- * function:
+ * function:
*
- * purpose:
+ * purpose:
*
* returns: ZFCP_ERP_CONTINUES - action continues (asynchronously)
* ZFCP_ERP_FAILED - action finished unsuccessfully
@@ -2913,7 +2913,7 @@ void zfcp_erp_start_timer(struct zfcp_fs
}
/*
- * function:
+ * function:
*
* purpose: enqueue the specified error recovery action, if needed
*
@@ -2992,7 +2992,7 @@ zfcp_erp_action_enqueue(int action,
port->erp_action.action);
debug_text_event(adapter->erp_dbf, 4,
"pf_actenq_drp");
- } else
+ } else
debug_text_event(adapter->erp_dbf, 4,
"pf_actenq_drpcp");
debug_event(adapter->erp_dbf, 4, &port->wwpn,
Index: HEAD/drivers/s390/scsi/zfcp_ext.h
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_ext.h
+++ HEAD/drivers/s390/scsi/zfcp_ext.h
@@ -1,22 +1,22 @@
-/*
+/*
* This file is part of the zfcp device driver for
* FCP adapters for IBM System z9 and zSeries.
*
* (C) Copyright IBM Corp. 2002, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef ZFCP_EXT_H
Index: HEAD/drivers/s390/scsi/zfcp_fsf.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_fsf.c
+++ HEAD/drivers/s390/scsi/zfcp_fsf.c
@@ -80,10 +80,10 @@ static const char zfcp_act_subtable_type
/*
* function: zfcp_fsf_req_alloc
*
- * purpose: Obtains an fsf_req and potentially a qtcb (for all but
+ * purpose: Obtains an fsf_req and potentially a qtcb (for all but
* unsolicited requests) via helper functions
* Does some initial fsf request set-up.
- *
+ *
* returns: pointer to allocated fsf_req if successfull
* NULL otherwise
*
@@ -192,7 +192,7 @@ void zfcp_fsf_req_dismiss_all(struct zfc
* returns: 0 - success
* !0 - failure
*
- * context:
+ * context:
*/
int
zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req)
@@ -214,8 +214,8 @@ zfcp_fsf_req_complete(struct zfcp_fsf_re
}
/*
- * fsf_req may be deleted due to waking up functions, so
- * cleanup is saved here and used later
+ * fsf_req may be deleted due to waking up functions, so
+ * cleanup is saved here and used later
*/
if (likely(fsf_req->status & ZFCP_STATUS_FSFREQ_CLEANUP))
cleanup = 1;
@@ -259,9 +259,9 @@ zfcp_fsf_req_complete(struct zfcp_fsf_re
* and initiates appropriate actions
* (usually calling FSF command specific handlers)
*
- * returns:
+ * returns:
*
- * context:
+ * context:
*
* locks:
*/
@@ -638,7 +638,7 @@ zfcp_fsf_link_down_info_eval(struct zfcp
*
* purpose: calls the appropriate command specific handler
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_req_dispatch(struct zfcp_fsf_req *fsf_req)
@@ -854,7 +854,7 @@ zfcp_fsf_status_read_port_closed(struct
*
* purpose: is called for finished Open Port command
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req)
@@ -1088,7 +1088,7 @@ zfcp_fsf_status_read_handler(struct zfcp
* returns: address of initiated FSF request
* NULL - request could not be initiated
*
- * FIXME(design): should be watched by a timeout !!!
+ * FIXME(design): should be watched by a timeout !!!
* FIXME(design) shouldn't this be modified to return an int
* also...don't know how though
*/
@@ -1157,7 +1157,7 @@ zfcp_fsf_abort_fcp_command(unsigned long
*
* purpose: is called for finished Abort FCP Command request
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req)
@@ -2437,10 +2437,10 @@ zfcp_fsf_exchange_port_data_handler(stru
/*
* function: zfcp_fsf_open_port
*
- * purpose:
+ * purpose:
*
* returns: address of initiated FSF request
- * NULL - request could not be initiated
+ * NULL - request could not be initiated
*/
int
zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
@@ -2501,7 +2501,7 @@ zfcp_fsf_open_port(struct zfcp_erp_actio
*
* purpose: is called for finished Open Port command
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_open_port_handler(struct zfcp_fsf_req *fsf_req)
@@ -3103,7 +3103,7 @@ zfcp_fsf_open_unit(struct zfcp_erp_actio
*
* purpose: is called for finished Open LUN command
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req)
@@ -3366,7 +3366,7 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
* purpose:
*
* returns: address of fsf_req - request successfully initiated
- * NULL -
+ * NULL -
*
* assumptions: This routine does not check whether the associated
* remote port/lun has already been opened. This should be
@@ -3828,7 +3828,7 @@ zfcp_fsf_send_fcp_command_task_managemen
*
* purpose: is called for finished Send FCP Command
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req)
@@ -4065,7 +4065,7 @@ zfcp_fsf_send_fcp_command_handler(struct
*
* purpose: evaluates FCP_RSP IU
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
@@ -4292,7 +4292,7 @@ zfcp_fsf_send_fcp_command_task_handler(s
*
* purpose: evaluates FCP_RSP IU
*
- * returns:
+ * returns:
*/
static int
zfcp_fsf_send_fcp_command_task_management_handler(struct zfcp_fsf_req *fsf_req)
@@ -4735,7 +4735,7 @@ zfcp_fsf_req_create(struct zfcp_adapter
INIT_LIST_HEAD(&fsf_req->list);
init_timer(&fsf_req->timer);
- /* initialize waitqueue which may be used to wait on
+ /* initialize waitqueue which may be used to wait on
this request completion */
init_waitqueue_head(&fsf_req->completion_wq);
Index: HEAD/drivers/s390/scsi/zfcp_fsf.h
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_fsf.h
+++ HEAD/drivers/s390/scsi/zfcp_fsf.h
@@ -1,22 +1,22 @@
-/*
+/*
* This file is part of the zfcp device driver for
* FCP adapters for IBM System z9 and zSeries.
*
* (C) Copyright IBM Corp. 2002, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef FSF_H
Index: HEAD/drivers/s390/scsi/zfcp_qdio.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_qdio.c
+++ HEAD/drivers/s390/scsi/zfcp_qdio.c
@@ -176,10 +176,9 @@ zfcp_qdio_handler_error_check(struct zfc
* That is why we need to clear the link-down flag
* which is set again in case we have missed by a mile.
*/
- zfcp_erp_adapter_reopen(
- adapter,
- ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
- ZFCP_STATUS_COMMON_ERP_FAILED);
+ zfcp_erp_adapter_reopen(adapter,
+ ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
+ ZFCP_STATUS_COMMON_ERP_FAILED);
}
return retval;
}
Index: HEAD/drivers/s390/scsi/zfcp_scsi.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_scsi.c
+++ HEAD/drivers/s390/scsi/zfcp_scsi.c
@@ -1,22 +1,22 @@
-/*
+/*
* This file is part of the zfcp device driver for
* FCP adapters for IBM System z9 and zSeries.
*
* (C) Copyright IBM Corp. 2002, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_SCSI
@@ -101,7 +101,7 @@ zfcp_get_fcp_dl_ptr(struct fcp_cmnd_iu *
((unsigned char *) fcp_cmd +
sizeof (struct fcp_cmnd_iu) + additional_length);
/*
- * fcp_dl_addr = start address of fcp_cmnd structure +
+ * fcp_dl_addr = start address of fcp_cmnd structure +
* size of fixed part + size of dynamically sized add_dcp_cdb field
* SEE FCP-2 documentation
*/
@@ -194,7 +194,7 @@ static void zfcp_scsi_slave_destroy(stru
"address %p\n", sdpnt);
}
-/*
+/*
* called from scsi midlayer to allow finetuning of a device.
*/
static int
@@ -372,7 +372,7 @@ zfcp_unit_lookup(struct zfcp_adapter *ad
/**
* zfcp_scsi_eh_abort_handler - abort the specified SCSI command
- * @scpnt: pointer to scsi_cmnd to be aborted
+ * @scpnt: pointer to scsi_cmnd to be aborted
* Return: SUCCESS - command has been aborted and cleaned up in internal
* bookkeeping, SCSI stack won't be called for aborted command
* FAILED - otherwise
Index: HEAD/drivers/s390/scsi/zfcp_sysfs_unit.c
===================================================================
--- HEAD.orig/drivers/s390/scsi/zfcp_sysfs_unit.c
+++ HEAD/drivers/s390/scsi/zfcp_sysfs_unit.c
@@ -139,7 +139,7 @@ static struct attribute_group zfcp_unit_
.attrs = zfcp_unit_attrs,
};
-/**
+/**
* zfcp_sysfs_create_unit_files - create sysfs unit files
* @dev: pointer to belonging device
*
@@ -151,7 +151,7 @@ zfcp_sysfs_unit_create_files(struct devi
return sysfs_create_group(&dev->kobj, &zfcp_unit_attr_group);
}
-/**
+/**
* zfcp_sysfs_remove_unit_files - remove sysfs unit files
* @dev: pointer to belonging device
*
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
