On September 06, 2007 12:40 PM, Louis-Michel Gelinas wrote: > > After messing around with various kernels and drivers, I finnaly got > this adaptor to work by changing the define > MPI_MANUFACTPAGE_DEVID_SAS1068E to (0x0059) from (0x0058) in > > drivers/message/fusion/lsi/mpi_cnfg.h:553 > > I understand this is not the preferred method to say the > least. However, > it is the only way I could this adaptor running, also my tests show it > to be stable... > > Should I submit a proper patch? Shouldn't this card use the > megaraid_sas > driver ?! > > Please indicate against which git url I should base my patch. > > I am using 2.6.21.3 but I believe this change can be applied to any > kernel/git. > The driver that works with the (0x59) pci_device_id is megasr. You will need to contact the megaraid folks to obtain those sources, as its not supplied in the linux kernel. Please don't supply any patch against fusion to support that, as I will reject it. Eric Moore - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
