[PATCH v8 12/23] scsi: Remove scsi device no_start_on_resume flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The scsi device flag no_start_on_resume is not set by any scsi low
level driver. Remove it. This reverts the changes introduced by commit
0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume").

Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@xxxxxxxxxxxxx>
Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
---
 drivers/scsi/sd.c          | 9 +++------
 include/scsi/scsi_device.h | 1 -
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index f911a64521e6..37a7d9cd2df3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3895,7 +3895,7 @@ static int sd_suspend_runtime(struct device *dev)
 static int sd_resume(struct device *dev, bool runtime)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
-	int ret = 0;
+	int ret;
 
 	if (!sdkp)	/* E.g.: runtime resume at the start of sd_probe() */
 		return 0;
@@ -3905,11 +3905,8 @@ static int sd_resume(struct device *dev, bool runtime)
 		return 0;
 	}
 
-	if (!sdkp->device->no_start_on_resume) {
-		sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
-		ret = sd_start_stop_device(sdkp, 1);
-	}
-
+	sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
+	ret = sd_start_stop_device(sdkp, 1);
 	if (!ret) {
 		opal_unlock_from_suspend(sdkp->opal_dev);
 		sdkp->suspended = false;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index fd41fdac0a8e..e6e476fe2272 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -197,7 +197,6 @@ struct scsi_device {
 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 	unsigned no_start_on_add:1;	/* do not issue start on add */
 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
-	unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
 	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 	unsigned select_no_atn:1;
-- 
2.41.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux