Re: [PATCH V3 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/27/2023 2:55 PM, Konrad Dybcio wrote:
On 27.09.2023 10:18, Nitin Rawat wrote:
Add UFS host controller and PHY nodes for sc7280 IDP board.

Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
  1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@
  	status = "okay";
  };

+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
Were you able to confirm it's correct (see the q in [1])
Sorry I missed to reply to your query in my last reply .
Yes Kodiak support both UFS2.x and UFS3.x and UFS2.x needs
vccq2 . Hence we need that node.



Konrad

[1] https://lore.kernel.org/linux-arm-msm/20230926162042.14180-1-quic_nitirawa@xxxxxxxxxxx/T/#m72ca82a9145af380ffd37415455d6ef3d4195795



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux