[PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.

Fix this by not calling sd_shutdown() in sd_remove() if the device
is not running.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: Bart Van Assche <bvanassche@xxxxxxx>
 drivers/scsi/sd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1d106c8ad5af..d86306d42445 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3727,7 +3727,8 @@ static int sd_remove(struct device *dev)
-	sd_shutdown(dev);
+	if (sdkp->device->sdev_state == SDEV_RUNNING)
+		sd_shutdown(dev);
 	return 0;

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux