[PATCH] scsi: Update Aic94xx SAS/SATA Linux open source device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Subject:  [PATCH] scsi: Update Aic94xx SAS/SATA Linux open source device
driver to fix smartctl utility problem.

Contribution:
   Gilbert Wu <gilbert_wu@xxxxxxxxxxx>

Change Log:


1. Fixed the problem that "smartctl -a /dev/some_sata_disk -d ata"
   does not work on aic94xx device drive with SATA devices.
   The smartctl utility send down ATA smart command to aic94xx
   driver and fail to get the result which is stored on ATA output
   register. 
   In normal case, Aic94xx’s firmware does not return the value of
   ATA output register to device driver due to performance reason.
   To solve this issue then the driver need to turn on internal
   flag (CSMI_TASK) for particular ATA command to enable firmware
   to return the value of ATA output register.




Patch: apply to aic94xx-sas-2.6.git development tree

Signed-off-by: Gilbert Wu <gilbert_wu@xxxxxxxxxxx>




diff -urN old/drivers/scsi/aic94xx/aic94xx_task.c
new/drivers/scsi/aic94xx/aic94xx_task.c
--- old/drivers/scsi/aic94xx/aic94xx_task.c	2007-08-30 16:32:12.000000000 -0700
+++ new/drivers/scsi/aic94xx/aic94xx_task.c	2007-08-30 16:31:50.000000000 -0700
@@ -33,6 +33,11 @@
 static void asd_unbuild_smp_ascb(struct asd_ascb *a);
 static void asd_unbuild_ssp_ascb(struct asd_ascb *a);
 
+#define ATA_SMART_COMMAND       0xb0
+#define ATA_DEVICE_DIAGNOSTIC   0x90
+#define ATA_CHECK_POWER_MODE    0xe5
+#define ATA_SMART_STATUS        0xda
+
 static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num)
 {
 	unsigned long flags;
@@ -253,6 +258,7 @@
 		break;
 	case TC_SSP_RESP:
 	case TC_ATA_RESP:
+	case TC_CSMI:
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_PROTO_RESPONSE;
 		asd_get_response_tasklet(ascb, dl);
@@ -427,6 +433,15 @@
 			flags |= STP_AFFIL_POLICY;
 		scb->ata_task.flags = flags;
 	}
+
+	if ((scb->ata_task.fis.command == ATA_SMART_COMMAND &&
+		scb->ata_task.fis.features == ATA_SMART_STATUS)
+		|| scb->ata_task.fis.command == ATA_DEVICE_DIAGNOSTIC
+		|| scb->ata_task.fis.command == ATA_CHECK_POWER_MODE)
+	{
+		scb->ata_task.ata_flags|=CSMI_TASK;
+	}
+
 	ascb->tasklet_complete = asd_task_tasklet_complete;
 
 	if (likely(!task->ata_task.device_control_reg_update))


-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux