Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not
seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES
commands correctly and hang when a non-zero service action is specified
(one command format with service action case in scsi_report_opcode()).
Currently, CDL probing with scsi_cdl_check_cmd() is the only caller
using a non zero service action for scsi_report_opcode(). To avoid
issues with these old drives, do not attempt CDL probe if the device
reports support for an SPC version lower than 5 (CDL was introduced in
SPC-5). To keep things working with ATA devices which probe for the CDL
T2A and T2B pages introduced with SPC-6, modify ata_scsiop_inq_std() to
claim SPC-6 version compatibility for ATA drives supporting CDL.
SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix
scsi_probe_lun() to correctly capture this value by changing the bit
mask for the second byte of the INQUIRY response from 0x7 to 0xf.
include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with
the value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and
SCSI_SPC_5 versions are also added.
Reported-by: John David Anglin <dave.anglin@xxxxxxxx>
Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
drivers/ata/libata-scsi.c | 3 +++
drivers/scsi/scsi.c | 11 +++++++++++
drivers/scsi/scsi_scan.c | 2 +-
include/scsi/scsi.h | 3 +++
4 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 92ae4b4f30ac..7aa70af1fc07 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1828,6 +1828,9 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
hdr[2] = 0x7; /* claim SPC-5 version compatibility */
}
+ if (args->dev->flags & ATA_DFLAG_CDL)
+ hdr[2] = 0xd; /* claim SPC-6 version compatibility */
+
memcpy(rbuf, hdr, sizeof(hdr));
memcpy(&rbuf[8], "ATA ", 8);
ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index d0911bc28663..89367c4bf0ef 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -613,6 +613,17 @@ void scsi_cdl_check(struct scsi_device *sdev)
bool cdl_supported;
unsigned char *buf;
+ /*
+ * Support for CDL was defined in SPC-5. Ignore devices reporting an
+ * lower SPC version. This also avoids problems with old drives choking
+ * on MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES with a
+ * service action specified, as done in scsi_cdl_check_cmd().
+ */
+ if (sdev->scsi_level < SCSI_SPC_5) {
+ sdev->cdl_supported = 0;
+ return;
+ }
+
buf = kmalloc(SCSI_CDL_CHECK_BUF_LEN, GFP_KERNEL);
if (!buf) {
sdev->cdl_supported = 0;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 6650f63afec9..37dd6bbcffd3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -822,7 +822,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
* device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
* non-zero LUNs can be scanned.
*/
- sdev->scsi_level = inq_result[2] & 0x07;
+ sdev->scsi_level = inq_result[2] & 0x0f;
if (sdev->scsi_level >= 2 ||
(sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
sdev->scsi_level++;
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index ec093594ba53..4498f845b112 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -157,6 +157,9 @@ enum scsi_disposition {
#define SCSI_3 4 /* SPC */
#define SCSI_SPC_2 5
#define SCSI_SPC_3 6
+#define SCSI_SPC_4 7
+#define SCSI_SPC_5 8
+#define SCSI_SPC_6 14
/*
* INQ PERIPHERAL QUALIFIERS
--
2.41.0
