On 12/09/2023 07:13, Damien Le Moal wrote:
hmm... maybe scsi_debug could be modified to support ATA devices (with
libata).
Regardless, I'm happy to check the code change which you attempted if
shared.
I had a closer look at what the hisi_sas driver is doing. The link it creates
with device_add_link() is between the scsi device gendev and the hisi_hba->dev,
that is, the HBA device.
So nothing to do with libata port of device.
Correct, it's just for the sdev -> host dev link
Trying to mimic what libata is now doing, I tried this:
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 12e2653846e3..91d76258e6ea 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -624,6 +624,26 @@ int sas_ata_init(struct domain_device *found_dev)
return rc;
}
+int sas_ata_slave_configure(struct scsi_device *sdev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ struct ata_port *ap = dev->sata_dev.ap;
+ struct device *sdev_dev = &sdev->sdev_gendev;
+ struct device_link *link;
+
+ ata_sas_slave_configure(sdev, ap);
+
+ link = device_link_add(sdev_dev, &ap->tdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
I am not sure what is the point of this. For libsas/pm8001 driver, there
is no ata_port -> .. -> host dev link, right? If so, it just seems that
you are are adding a dependency to a device (&ap->tdev) which has no
dependency to a real device itself.
+ if (!link && pm_runtime_enabled(sdev_dev)) {
+ dev_err(sdev_dev,
+ "add device link failed, disabling runtime PM for the
host\n");
+ pm_runtime_disable(sdev_dev);
+ }
+
+ return 0;
+}
+
void sas_ata_task_abort(struct sas_task *task)
{
struct ata_queued_cmd *qc = task->uldd_task;
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index a6dc7dc07fce..82c6d8e1e8c7 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -58,6 +58,8 @@ void sas_enable_revalidation(struct sas_ha_struct *ha);
void sas_queue_deferred_work(struct sas_ha_struct *ha);
void __sas_drain_work(struct sas_ha_struct *ha);
+int sas_ata_slave_configure(struct scsi_device *sdev);
+
void sas_deform_port(struct asd_sas_phy *phy, int gone);
void sas_porte_bytes_dmaed(struct work_struct *work);
diff --git a/drivers/scsi/libsas/sas_scsi_host.c
b/drivers/scsi/libsas/sas_scsi_host.c
index 9047cfcd1072..b6c419aa563e 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -810,10 +810,8 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
- if (dev_is_sata(dev)) {
- ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap);
- return 0;
- }
+ if (dev_is_sata(dev))
+ return sas_ata_slave_configure(scsi_dev);
sas_read_port_mode_page(scsi_dev);
This does not change the drive discovery, all drives connected to the HBA are
found and identified:
[ 52.974154] scsi host12: pm80xx
[ 54.445986] sas: phy-12:4 added to port-12:0, phy_mask:0x10 (50010860002f5644)
[ 54.449019] sas: DOING DISCOVERY on port 0, pid:423
[ 54.461108] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 54.465601] sas: ata13: end_device-12:0: dev error handler
[ 54.618588] ata13.00: ATA-11: WDC WUH721818ALN604, PCGNW232, max UDMA/133
[ 56.295486] ata13.00: 4394582016 sectors, multi 0: LBA48 NCQ (depth 32)
[ 56.306849] ata13.00: Features: NCQ-sndrcv NCQ-prio
[ 56.320849] ata13.00: configured for UDMA/133
[ 56.324504] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 56.340346] scsi 12:0:0:0: Direct-Access ATA WDC WUH721818AL W232
PQ: 0 ANSI: 5
[ 56.347160] sas: DONE DISCOVERY on port 0, pid:423, result:0
[ 56.348161] sas: phy-12:5 added to port-12:1, phy_mask:0x20 (50010860002f5645)
[ 56.351291] sas: DOING DISCOVERY on port 1, pid:423
[ 56.363285] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 56.368788] sas: ata13: end_device-12:0: dev error handler
[ 56.368859] sas: ata14: end_device-12:1: dev error handler
[ 56.522903] ata14.00: ATA-11: WDC WUH721818ALN604, PCGNWTW2, max UDMA/133
[ 58.402015] ata14.00: 4394582016 sectors, multi 0: LBA48 NCQ (depth 32)
[ 58.406207] ata14.00: Features: NCQ-sndrcv NCQ-prio
[ 58.420254] ata14.00: configured for UDMA/133
[ 58.423222] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 58.438869] scsi 12:0:1:0: Direct-Access ATA WDC WUH721818AL WTW2
PQ: 0 ANSI: 5
[ 58.445619] sas: DONE DISCOVERY on port 1, pid:423, result:0
[ 58.446687] sas: phy-12:6 added to port-12:2, phy_mask:0x40 (50010860002f5646)
[ 58.449803] sas: DOING DISCOVERY on port 2, pid:423
[ 58.461732] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 58.465369] sas: ata13: end_device-12:0: dev error handler
[ 58.465426] sas: ata14: end_device-12:1: dev error handler
[ 58.465432] sas: ata15: end_device-12:2: dev error handler
[ 58.622345] ata15.00: ATA-12: WDC WUH722222ALN604, LNGNW1TZ, max UDMA/133
[ 59.540468] ata15.00: 5371330560 sectors, multi 0: LBA48 NCQ (depth 32)
[ 59.588217] ata15.00: Features: NCQ-sndrcv NCQ-prio CDL
[ 59.697588] ata15.00: configured for UDMA/133
[ 59.700514] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 59.716067] scsi 12:0:2:0: Direct-Access ATA WDC WUH722222AL W1TZ
PQ: 0 ANSI: 5
[ 59.723838] sas: DONE DISCOVERY on port 2, pid:423, result:0
[ 59.724893] sas: phy-12:7 added to port-12:3, phy_mask:0x80 (50010860002f5647)
[ 59.727852] sas: DOING DISCOVERY on port 3, pid:423
[ 59.739699] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 59.743344] sas: ata13: end_device-12:0: dev error handler
[ 59.743402] sas: ata14: end_device-12:1: dev error handler
[ 59.743405] sas: ata15: end_device-12:2: dev error handler
[ 59.743429] sas: ata16: end_device-12:3: dev error handler
[ 59.898839] ata16.00: ATA-11: WDC WSH722020ALN604, PCGMW803, max UDMA/133
[ 62.348080] ata16.00: 4882956288 sectors, multi 0: LBA48 NCQ (depth 32)
[ 62.353731] ata16.00: Features: NCQ-sndrcv NCQ-prio
[ 62.370011] ata16.00: configured for UDMA/133
[ 62.373532] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 62.389238] scsi 12:0:3:0: Direct-Access-ZBC ATA WDC WSH722020AL W803
PQ: 0 ANSI: 7
[ 62.396642] sas: DONE DISCOVERY on port 3, pid:423, result:0
But no scsi disk added: >
# lsscsi
[12:0:0:0] disk ATA WDC WUH721818AL W232 -
[12:0:1:0] disk ATA WDC WUH721818AL WTW2 -
[12:0:2:0] disk ATA WDC WUH722222AL W1TZ -
[12:0:3:0] zbc ATA WDC WSH722020AL W803 -
(no /dev/sdX device).
While not printed on this run, I often see messages like
scsi 12:0:0:0: deferred probe error
No idea why... I do not see where that comes from.
It might be related to what I mention, above. Anyway, I would rather you
don't get this series bogged down in libsas issues.
This is all with pm8001 driver.
Thanks,
John
