Some drives are really slow to spinup on resume, resulting is a very slow response to COMRESET and to error messages such as: ata1: COMRESET failed (errno=-16) ata1: link is slow to respond, please be patient (ready=0) ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: configured for UDMA/133 Given that the slowness of the response is indicated with the message "link is slow to respond..." and that resets are retried until the device is detected as online after up to 1min (ata_eh_reset_timeouts), there is no point in printing the "COMRESET failed" error message. Let's not scare the user with non fatal errors and only warn about reset failures in ata_eh_reset() when all reset retries have been exhausted. Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxx> --- drivers/ata/libata-eh.c | 2 ++ drivers/ata/libata-sata.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 03c45630a35b..2b933e7a357a 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2919,6 +2919,8 @@ int ata_eh_reset(struct ata_link *link, int classify, */ if (ata_is_host_link(link)) ata_eh_thaw_port(ap); + ata_link_warn(link, "%s failed\n", + reset == hardreset ? "hardreset" : "softreset"); goto out; } diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 0748e9ea4f5f..00674aae1696 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -608,7 +608,6 @@ int sata_link_hardreset(struct ata_link *link, const unsigned int *timing, /* online is set iff link is online && reset succeeded */ if (online) *online = false; - ata_link_err(link, "COMRESET failed (errno=%d)\n", rc); } return rc; } -- 2.41.0
