From: Justin Tee <justin.tee@xxxxxxxxxxxx> [ Upstream commit 089ea22e374aa20043e72243c47b5867d5419d38 ] A mailbox timeout error usually indicates something has gone wrong, and a follow up reset of the HBA is a typical recovery mechanism. Introduce a MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS commands if the MBX_TMO_ERR flag condition was set. This ensures all of the registered SGL resources meant for ELS traffic are not leaked after an HBA reset. Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@xxxxxxxxx Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 25 ++++++++++++++++++------- drivers/scsi/lpfc/lpfc_init.c | 20 +++++++++++++++++--- drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++- 4 files changed, 43 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 9a89636843693..e8d7eeeb21856 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -872,6 +872,7 @@ enum lpfc_irq_chann_mode { enum lpfc_hba_bit_flags { FABRIC_COMANDS_BLOCKED, HBA_PCI_ERR, + MBX_TMO_ERR, }; struct lpfc_hba { diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2bad9954c355f..6f6ef5235ee3b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -9588,11 +9588,13 @@ void lpfc_els_flush_cmd(struct lpfc_vport *vport) { LIST_HEAD(abort_list); + LIST_HEAD(cancel_list); struct lpfc_hba *phba = vport->phba; struct lpfc_sli_ring *pring; struct lpfc_iocbq *tmp_iocb, *piocb; u32 ulp_command; unsigned long iflags = 0; + bool mbx_tmo_err; lpfc_fabric_abort_vport(vport); @@ -9614,15 +9616,16 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) if (phba->sli_rev == LPFC_SLI_REV4) spin_lock(&pring->ring_lock); + mbx_tmo_err = test_bit(MBX_TMO_ERR, &phba->bit_flags); /* First we need to issue aborts to outstanding cmds on txcmpl */ list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) { - if (piocb->cmd_flag & LPFC_IO_LIBDFC) + if (piocb->cmd_flag & LPFC_IO_LIBDFC && !mbx_tmo_err) continue; if (piocb->vport != vport) continue; - if (piocb->cmd_flag & LPFC_DRIVER_ABORTED) + if (piocb->cmd_flag & LPFC_DRIVER_ABORTED && !mbx_tmo_err) continue; /* On the ELS ring we can have ELS_REQUESTs or @@ -9641,8 +9644,8 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) */ if (phba->link_state == LPFC_LINK_DOWN) piocb->cmd_cmpl = lpfc_cmpl_els_link_down; - } - if (ulp_command == CMD_GEN_REQUEST64_CR) + } else if (ulp_command == CMD_GEN_REQUEST64_CR || + mbx_tmo_err) list_add_tail(&piocb->dlist, &abort_list); } @@ -9654,11 +9657,19 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) { spin_lock_irqsave(&phba->hbalock, iflags); list_del_init(&piocb->dlist); - lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL); + if (mbx_tmo_err) + list_move_tail(&piocb->list, &cancel_list); + else + lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL); + spin_unlock_irqrestore(&phba->hbalock, iflags); } - /* Make sure HBA is alive */ - lpfc_issue_hb_tmo(phba); + if (!list_empty(&cancel_list)) + lpfc_sli_cancel_iocbs(phba, &cancel_list, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + else + /* Make sure HBA is alive */ + lpfc_issue_hb_tmo(phba); if (!list_empty(&abort_list)) lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 3221a934066bb..ce9e4cdd6004c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7550,6 +7550,8 @@ lpfc_disable_pci_dev(struct lpfc_hba *phba) void lpfc_reset_hba(struct lpfc_hba *phba) { + int rc = 0; + /* If resets are disabled then set error state and return. */ if (!phba->cfg_enable_hba_reset) { phba->link_state = LPFC_HBA_ERROR; @@ -7560,13 +7562,25 @@ lpfc_reset_hba(struct lpfc_hba *phba) if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) { lpfc_offline_prep(phba, LPFC_MBX_WAIT); } else { + if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) { + /* Perform a PCI function reset to start from clean */ + rc = lpfc_pci_function_reset(phba); + lpfc_els_flush_all_cmd(phba); + } lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_sli_flush_io_rings(phba); } lpfc_offline(phba); - lpfc_sli_brdrestart(phba); - lpfc_online(phba); - lpfc_unblock_mgmt_io(phba); + clear_bit(MBX_TMO_ERR, &phba->bit_flags); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "8888 PCI function reset failed rc %x\n", + rc); + } else { + lpfc_sli_brdrestart(phba); + lpfc_online(phba); + lpfc_unblock_mgmt_io(phba); + } } /** diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 58d10f8f75a78..4dfadf254a727 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -3935,6 +3935,8 @@ void lpfc_poll_eratt(struct timer_list *t) uint64_t sli_intr, cnt; phba = from_timer(phba, t, eratt_poll); + if (!(phba->hba_flag & HBA_SETUP)) + return; /* Here we will also keep track of interrupts per sec of the hba */ sli_intr = phba->sli.slistat.sli_intr; @@ -7693,7 +7695,9 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba, spin_unlock_irq(&phba->hbalock); } else { lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, - "3161 Failure to post sgl to port.\n"); + "3161 Failure to post sgl to port,status %x " + "blkcnt %d totalcnt %d postcnt %d\n", + status, block_cnt, total_cnt, post_cnt); return -EIO; } @@ -8478,6 +8482,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); } } + phba->hba_flag &= ~HBA_SETUP; lpfc_sli4_dip(phba); @@ -9282,6 +9287,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing * it to fail all outstanding SCSI IO. */ + set_bit(MBX_TMO_ERR, &phba->bit_flags); spin_lock_irq(&phba->pport->work_port_lock); phba->pport->work_port_events &= ~WORKER_MBOX_TMO; spin_unlock_irq(&phba->pport->work_port_lock); -- 2.40.1
