Can any SCSI experts explain what's going wrong here? Alan Stern ---------- Forwarded message ---------- Date: Tue, 28 Aug 2007 22:13:16 +0200 From: Andreas Koenecke <akoenecke@xxxxxxxxxxxx> To: USB users list <linux-usb-users@xxxxxxxxxxxxxxxxxxxxx> Cc: akoenecke@xxxxxxxxxxx Subject: Re: [Linux-usb-users] usb-storage and Motorola Z6 * Dienstag, 28. August 2007 um 15:13 (-0400) schrieb Alan Stern: > > > > Aug 28 09:54:33 kocom kernel: usb-storage: device scan complete > > > > > > Aug 28 09:54:33 kocom kernel: scsi 4:0:0:0: Direct-Access Motorola MSnc. > > > PQ: 1 ANSI: 0 CCS > > > > > > Aug 28 09:54:33 kocom kernel: scsi 4:0:0:1: Direct-Access Motorola MSnc. > > > PQ: 1 ANSI: 0 CCS > > > > > > Aug 28 09:54:33 kocom kernel: scsi 4:0:0:0: Attached scsi generic sg2 type 0 > > > > > > Aug 28 09:54:33 kocom kernel: scsi 4:0:0:1: Attached scsi generic sg3 type 0 > > > > > > Aug 28 10:02:47 kocom kernel: usb 3-1: USB disconnect, address 5 > > > --------------------------------------------------------------------------------- > > Everything looks correct except that sd_mod isn't loaded. sd_mod is build fix into the kernel because of the real SCSI card. All other usb-storage devices (flash sticks, card reader and USB HDDs) are working without problems. I connected the phone to a complete different computer (my laptop: vendor kernel, more modularized) and sd_mod is loading when I plug in, but nevertheless no block-devices. The same behavior as on my desktop computer... Andreas - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
