[PATCH V7 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Qualcomm UFS Controller V4 and above supports multiple unipro frequencies
like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz. Current code
supports only 150MHz and 75MHz which have performance impact due to low
UFS controller frequencies.

For targets which supports frequencies other than 150 MHz and 75 Mhz,
needs an update of MAX_CORE_CLK_1US_CYCLES to match the configured
frequency to avoid functionality issues. Add multiple frequency support
for MAX_CORE_CLK_1US_CYCLES based on the frequency configured.

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
 drivers/ufs/host/ufs-qcom.c | 51 ++++++++++++++++++++++---------------
 drivers/ufs/host/ufs-qcom.h |  1 +
 2 files changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index d846e68a5734..b2be9ff272a4 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -93,8 +93,7 @@ static const struct __ufs_qcom_bw_table {
 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];

 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles);
+static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up);

 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
 {
@@ -685,14 +684,11 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 			return -EINVAL;
 		}

-		if (ufs_qcom_cap_qunipro(host))
-			/*
-			 * set unipro core clock cycles to 150 & clear clock
-			 * divider
-			 */
-			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
-									  150);
-
+		if (ufs_qcom_cap_qunipro(host)) {
+			err = ufs_qcom_set_core_clk_ctrl(hba, true);
+			if (err)
+				dev_err(hba->dev, "cfg core clk ctrl failed\n");
+		}
 		/*
 		 * Some UFS devices (and may be host) have issues if LCC is
 		 * enabled. So we are setting PA_Local_TX_LCC_Enable to 0
@@ -1296,12 +1292,25 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
 	phy_exit(host->generic_phy);
 }

-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles)
+static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	int err;
+	struct list_head *head = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+	u32 cycles_in_1us;
 	u32 core_clk_ctrl_reg;
+	int err;
+
+	list_for_each_entry(clki, head, list) {
+		if (!IS_ERR_OR_NULL(clki->clk) &&
+			!strcmp(clki->name, "core_clk_unipro")) {
+			if (is_scale_up)
+				cycles_in_1us = ceil(clki->max_freq, (1000 * 1000));
+			else
+				cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000));
+			break;
+		}
+	}

 	err = ufshcd_dme_get(hba,
 			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
@@ -1311,15 +1320,15 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,

 	/* Bit mask is different for UFS host controller V4.0.0 onwards */
 	if (host->hw_ver.major >= 4) {
-		if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, clk_cycles))
+		if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us))
 			return -ERANGE;
 		core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4;
-		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, clk_cycles);
+		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us);
 	} else {
-		if (!FIELD_FIT(CLK_1US_CYCLES_MASK, clk_cycles))
+		if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us))
 			return -ERANGE;
 		core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK;
-		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, clk_cycles);
+		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us);
 	}

 	/* Clear CORE_CLK_DIV_EN */
@@ -1343,8 +1352,8 @@ static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	/* set unipro core clock cycles to 150 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+	/* set unipro core clock attributes and clear clock divider */
+	return ufs_qcom_set_core_clk_ctrl(hba, true);
 }

 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
@@ -1379,8 +1388,8 @@ static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	/* set unipro core clock cycles to 75 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+	/* set unipro core clock attributes and clear clock divider */
+	return ufs_qcom_set_core_clk_ctrl(hba, false);
 }

 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 8a9d3dbec297..3c6ef1259af3 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -245,6 +245,7 @@ ufs_qcom_get_debug_reg_offset(struct ufs_qcom_host *host, u32 reg)
 #define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
 #define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
 #define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+#define ceil(freq, div) ((freq) % (div) == 0 ? ((freq)/(div)) : ((freq)/(div) + 1))

 int ufs_qcom_testbus_config(struct ufs_qcom_host *host);

--
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux