Re: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/28/2023 1:47 PM, Manivannan Sadhasivam wrote:
On Wed, Aug 23, 2023 at 09:14:12PM +0530, Nitin Rawat wrote:
This change configures SYS1CLK_1US_REG for pre scale up condition. Also
move ufs_qcom_cfg_timers from clk scaling post change ops to clk scaling
pre change ops to align with the hardware specification.


Same comment as previous patch. This looks like a bug fix to me.

Also, this patch should be splitted into 2. SYS1CLK_1US_REG and
ufs_qcom_cfg_timers change.

- Mani



In this patch we are trying to refactor ufs_qcom_cfg_timers function and added extra argument to this function. Since it is just refactoring code, IMO it's better to not split in to 2 patches. We will update the commit message to explain more in detail

--Nitin

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
  drivers/ufs/host/ufs-qcom.c | 61 +++++++++++++++++++++++++------------
  1 file changed, 42 insertions(+), 19 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 491c0173603e..82cf3ac4193a 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -533,7 +533,8 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
   * Return: zero for success and non-zero in case of a failure.
   */
  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
-			       u32 hs, u32 rate, bool update_link_startup_timer)
+				 u32 hs, u32 rate, bool link_startup,
+				 bool is_pre_scale_up)
  {
  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
  	struct ufs_clk_info *clki;
@@ -564,11 +565,16 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
  	/*
  	 * The Qunipro controller does not use following registers:
  	 * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
-	 * UFS_REG_PA_LINK_STARTUP_TIMER
-	 * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
-	 * Aggregation logic.
-	*/
-	if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+	 * UFS_REG_PA_LINK_STARTUP_TIMER.
+	 * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
+	 * Aggregation logic and Auto hibern8 logic.
+	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
+	 * controller V4.0.0 onwards.
+	 */
+	if (ufs_qcom_cap_qunipro(host) &&
+	    !(ufshcd_is_intr_aggr_allowed(hba) ||
+	    ufshcd_is_auto_hibern8_supported(hba) ||
+	    host->hw_ver.major >= 4))
  		return 0;

  	if (gear == 0) {
@@ -577,8 +583,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
  	}

  	list_for_each_entry(clki, &hba->clk_list_head, list) {
-		if (!strcmp(clki->name, "core_clk"))
-			core_clk_rate = clk_get_rate(clki->clk);
+		if (!strcmp(clki->name, "core_clk")) {
+			if (is_pre_scale_up)
+				core_clk_rate = clki->max_freq;
+			else
+				core_clk_rate = clk_get_rate(clki->clk);
+			break;
+		}
+
  	}

  	/* If frequency is smaller than 1MHz, set to 1MHz */
@@ -658,7 +670,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
  		mb();
  	}

-	if (update_link_startup_timer && host->hw_ver.major != 0x5) {
+	if (link_startup && host->hw_ver.major != 0x5) {
  		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
  			      REG_UFS_CFG0);
  		/*
@@ -719,7 +731,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
  	switch (status) {
  	case PRE_CHANGE:
  		if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
-					0, true)) {
+					0, true, false)) {
  			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
  				__func__);
  			return -EINVAL;
@@ -968,7 +980,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
  	case POST_CHANGE:
  		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
  					dev_req_params->pwr_rx,
-					dev_req_params->hs_rate, false)) {
+					dev_req_params->hs_rate, false, false)) {
  			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
  				__func__);
  			/*
@@ -1401,11 +1413,24 @@ static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
  static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
  {
  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
+	int err;

  	if (!ufs_qcom_cap_qunipro(host))
-		return 0;
+		goto out;
+
+	if (attr) {
+		err = ufs_qcom_cfg_timers(hba, attr->gear_rx,
+					    attr->pwr_rx, attr->hs_rate,
+					    false, true);
+		if (err)
+			dev_err(hba->dev, "%s ufs cfg timer failed\n",
+								__func__);
+	}

-	return ufs_qcom_cfg_core_clk_ctrl(hba);
+	err = ufs_qcom_cfg_core_clk_ctrl(hba);
+out:
+	return err;
  }

  static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
@@ -1441,6 +1466,7 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
  static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
  {
  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
  	struct list_head *head = &hba->clk_list_head;
  	struct ufs_clk_info *clki;
  	u32 curr_freq = 0;
@@ -1449,6 +1475,9 @@ static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
  	if (!ufs_qcom_cap_qunipro(host))
  		return 0;

+	if (attr)
+		ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
+					 attr->hs_rate, false, false);

  	list_for_each_entry(clki, head, list) {
  		if (!IS_ERR_OR_NULL(clki->clk) &&
@@ -1480,7 +1509,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
  		bool scale_up, enum ufs_notify_change_status status)
  {
  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
  	int err = 0;

  	/* check the host controller state before sending hibern8 cmd */
@@ -1510,11 +1538,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
  			return err;
  		}

-		ufs_qcom_cfg_timers(hba,
-				    dev_req_params->gear_rx,
-				    dev_req_params->pwr_rx,
-				    dev_req_params->hs_rate,
-				    false);
  		ufs_qcom_icc_update_bw(host);
  		ufshcd_uic_hibern8_exit(hba);
  	}
--
2.17.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux