On Wed, Aug 23, 2023 at 09:14:10PM +0530, Nitin Rawat wrote:
> Add Support to configure CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES
> for multiple unipro clock frequencies. Currently this is handled only for
> only 150Mhz and 75MHz.
>
> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
> Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> ---
> drivers/ufs/host/ufs-qcom.c | 88 ++++++++++++++++++++++++++++++++-----
> drivers/ufs/host/ufs-qcom.h | 9 ++++
> 2 files changed, 87 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index abc0e7f7d1b0..8162b19191a9 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -671,6 +671,45 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
> return 0;
> }
>
> +static int ufs_qcom_cfg_core_clk_ctrl(struct ufs_hba *hba)
> +{
> + struct list_head *head = &hba->clk_list_head;
> + struct ufs_clk_info *clki;
> + u32 max_freq = 0;
> + int err;
Let's use "ret" from now onwards. Existing "err" can be cleaned up later.
> +
> + list_for_each_entry(clki, head, list) {
> + if (!IS_ERR_OR_NULL(clki->clk) &&
> + !strcmp(clki->name, "core_clk_unipro")) {
Odd indentation.
> + max_freq = clki->max_freq;
> + break;
> + }
> + }
> +
> + switch (max_freq) {
> + case MHZ_403:
UNIPRO_CORE_CLK_FREQ_403_MHZ?
Same applies to other defines.
> + err = ufs_qcom_set_core_clk_ctrl(hba, 403, 16);
#define to_cycles_per_1us(freq) (freq / (1000 * 1000))
ret = ufs_qcom_set_core_clk_ctrl(hba, to_cycles_per_1us(max_freq), 16);
> + break;
> + case MHZ_300:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 300, 12);
> + break;
> + case MHZ_201_5:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 202, 8);
> + break;
> + case MHZ_150:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> + break;
> + case MHZ_100:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4);
> + break;
> + default:
> + dev_err(hba->dev, "unipro max_freq=%u entry missing\n", max_freq);
"UNIPRO clk max frequency (%u) not supported!"
> + err = -EINVAL;
-ERANGE
> + break;
> + }
> +
> + return err;
> +}
> static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
> enum ufs_notify_change_status status)
> {
> @@ -686,12 +725,15 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
> return -EINVAL;
> }
>
> - if (ufs_qcom_cap_qunipro(host))
> - /*
> - * set unipro core clock cycles to 150 & clear clock
> - * divider
> - */
> - err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> + if (ufs_qcom_cap_qunipro(host)) {
> + err = ufs_qcom_cfg_core_clk_ctrl(hba);
> + if (err) {
> + dev_err(hba->dev,
> + "%s cfg core clk ctrl failed\n",
"Failed to configure UNIPRO core clk"
> + __func__);
> + return err;
> + }
> + }
>
> /*
> * Some UFS devices (and may be host) have issues if LCC is
> @@ -1369,8 +1411,7 @@ static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
> if (!ufs_qcom_cap_qunipro(host))
> return 0;
>
> - /* set unipro core clock cycles to 150 and clear clock divider */
> - return ufs_qcom_set_core_clk_ctrl(hba, 150, 6);
> + return ufs_qcom_cfg_core_clk_ctrl(hba);
> }
>
> static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
> @@ -1401,12 +1442,39 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
> static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
> {
> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> + struct list_head *head = &hba->clk_list_head;
> + struct ufs_clk_info *clki;
> + u32 curr_freq = 0;
> + int err;
>
> if (!ufs_qcom_cap_qunipro(host))
> return 0;
>
> - /* set unipro core clock cycles to 75 and clear clock divider */
> - return ufs_qcom_set_core_clk_ctrl(hba, 75, 3);
> +
> + list_for_each_entry(clki, head, list) {
> + if (!IS_ERR_OR_NULL(clki->clk) &&
> + !strcmp(clki->name, "core_clk_unipro")) {
> + curr_freq = clk_get_rate(clki->clk);
> + break;
> + }
> + }
> + switch (curr_freq) {
> + case MHZ_37_5:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 38, 2);
> + break;
> + case MHZ_75:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 75, 3);
> + break;
> + case MHZ_100:
> + err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4);
> + break;
> + default:
> + err = -EINVAL;
> + dev_err(hba->dev, "unipro curr_freq=%u entry missing\n", curr_freq);
> + break;
> + }
> +
> + return err;
Why can't you use the existing ufs_qcom_cfg_core_clk_ctrl() function?
- Mani
> }
>
> static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> index 325f08aca260..56550fd36c4e 100644
> --- a/drivers/ufs/host/ufs-qcom.h
> +++ b/drivers/ufs/host/ufs-qcom.h
> @@ -79,6 +79,15 @@ enum {
> UFS_MEM_CQIS_VS = 0x8,
> };
>
> +/* QCOM UFS host controller core clk frequencies */
> +#define MHZ_37_5 37500000
> +#define MHZ_50 50000000
> +#define MHZ_75 75000000
> +#define MHZ_100 100000000
> +#define MHZ_150 150000000
> +#define MHZ_300 300000000
> +#define MHZ_201_5 201500000
> +#define MHZ_403 403000000
> #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x)
> #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
>
> --
> 2.17.1
>
--
மணிவண்ணன் சதாசிவம்
