[PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES are configured
in clk scaling post change ops. Move this to clk scaling pre change ops to
align with the hardware specification.

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
 drivers/ufs/host/ufs-qcom.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 8162b19191a9..491c0173603e 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1399,12 +1399,6 @@ static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
 }

 static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
-{
-	/* nothing to do as of now */
-	return 0;
-}
-
-static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);

@@ -1414,6 +1408,11 @@ static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
 	return ufs_qcom_cfg_core_clk_ctrl(hba);
 }

+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+	return 0;
+}
+
 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
--
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux