[PATCH 3/3] scsi: pm80xx: Set RETFIS when requested by libsas

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



By default PM80xx HBAs return FIS only when a drive reports an error.
The RETFIS bit forces the controller to populate FIS even when a drive
reports no error.

Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_hwi.c |  8 +++++---
 drivers/scsi/pm8001/pm8001_hwi.h |  2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c | 11 ++++++-----
 drivers/scsi/pm8001/pm80xx_hwi.h |  2 +-
 4 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 73cd25f30ca5..255553dcadb9 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4095,7 +4095,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u32 hdr_tag, ncg_tag = 0;
 	u64 phys_addr;
 	u32 ATAP = 0x0;
-	u32 dir;
+	u32 dir, retfis;
 	u32  opc = OPC_INB_SATA_HOST_OPSTART;
 
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
@@ -4124,8 +4124,10 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	sata_cmd.tag = cpu_to_le32(tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
 	sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
-	sata_cmd.ncqtag_atap_dir_m =
-		cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir);
+	retfis = task->ata_task.return_fis_on_success;
+	sata_cmd.retfis_ncqtag_atap_dir_m =
+		cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
+				((ATAP & 0x3f) << 10) | dir);
 	sata_cmd.sata_fis = task->ata_task.fis;
 	if (likely(!task->ata_task.device_control_reg_update))
 		sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 961d0465b923..fc2127dcb58d 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -515,7 +515,7 @@ struct sata_start_req {
 	__le32	tag;
 	__le32	device_id;
 	__le32	data_len;
-	__le32	ncqtag_atap_dir_m;
+	__le32	retfis_ncqtag_atap_dir_m;
 	struct host_to_dev_fis	sata_fis;
 	u32	reserved1;
 	u32	reserved2;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 39a12ee94a72..e839fb53f0e3 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4457,7 +4457,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u64 phys_addr, end_addr;
 	u32 end_addr_high, end_addr_low;
 	u32 ATAP = 0x0;
-	u32 dir;
+	u32 dir, retfis;
 	u32 opc = OPC_INB_SATA_HOST_OPSTART;
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
 
@@ -4487,6 +4487,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	sata_cmd.tag = cpu_to_le32(tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
 	sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+	retfis = task->ata_task.return_fis_on_success;
 
 	sata_cmd.sata_fis = task->ata_task.fis;
 	if (likely(!task->ata_task.device_control_reg_update))
@@ -4502,8 +4503,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 		opc = OPC_INB_SATA_DIF_ENC_IO;
 
 		/* set encryption bit */
-		sata_cmd.ncqtag_atap_dir_m_dad =
-			cpu_to_le32(((ncg_tag & 0xff)<<16)|
+		sata_cmd.retfis_ncqtag_atap_dir_m_dad =
+			cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
 				((ATAP & 0x3f) << 10) | 0x20 | dir);
 							/* dad (bit 0-1) is 0 */
 		/* fill in PRD (scatter/gather) table, if any */
@@ -4569,8 +4570,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			   "Sending Normal SATA command 0x%x inb %x\n",
 			   sata_cmd.sata_fis.command, q_index);
 		/* dad (bit 0-1) is 0 */
-		sata_cmd.ncqtag_atap_dir_m_dad =
-			cpu_to_le32(((ncg_tag & 0xff)<<16) |
+		sata_cmd.retfis_ncqtag_atap_dir_m_dad =
+			cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
 					((ATAP & 0x3f) << 10) | dir);
 
 		/* fill in PRD (scatter/gather) table, if any */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index acf6e3005b84..eb8fd37b2066 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -731,7 +731,7 @@ struct sata_start_req {
 	__le32	tag;
 	__le32	device_id;
 	__le32	data_len;
-	__le32	ncqtag_atap_dir_m_dad;
+	__le32	retfis_ncqtag_atap_dir_m_dad;
 	struct host_to_dev_fis	sata_fis;
 	u32	reserved1;
 	u32	reserved2;	/* dword 11. rsvd for normal I/O. */
-- 
2.42.0.rc1.204.g551eb34607-goog




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux