[PATCH V3 06/14] scsi: lpfc: use blk_mq_max_nr_hw_queues() to calculate io vectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Take blk-mq's knowledge into account for calculating io queues.

Fix wrong queue mapping in case of kdump kernel.

On arm and ppc64, 'maxcpus=1' is passed to kdump kernel command line,
see `Documentation/admin-guide/kdump/kdump.rst`, so num_possible_cpus()
still returns all CPUs because 'maxcpus=1' just bring up one single
cpu core during booting.

blk-mq sees single queue in kdump kernel, and in driver's viewpoint
there are still multiple queues, this inconsistency causes driver to apply
wrong queue mapping for handling IO, and IO timeout is triggered.

Meantime, single queue makes much less resource utilization, and reduce
risk of kernel failure.

Reviewed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Cc: Justin Tee <justintee8345@xxxxxxxxx>
Cc: James Smart <james.smart@xxxxxxxxxxxx>
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3221a934066b..961ff392f1c5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -13025,6 +13025,8 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
 		flags |= PCI_IRQ_AFFINITY;
 	}
 
+	vectors = min_t(unsigned int, vectors, scsi_max_nr_hw_queues());
+
 	rc = pci_alloc_irq_vectors(phba->pcidev, 1, vectors, flags);
 	if (rc < 0) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-- 
2.40.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux