When preparing protection DIF I/O for DMA, the driver obtains reference
tags from scsi_prot_ref_tag. Previously, there was a wrong assumption that
an all 0xffffffff value meant error and thus the driver failed the I/O.
This patch removes the evaluation code and accepts whatever the upper layer
returns.
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_scsi.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a62e091894f6..d26941b131fd 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -109,8 +109,6 @@ lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
}
}
-#define LPFC_INVALID_REFTAG ((u32)-1)
-
/**
* lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
@@ -978,8 +976,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
sgpe = scsi_prot_sglist(sc);
lba = scsi_prot_ref_tag(sc);
- if (lba == LPFC_INVALID_REFTAG)
- return 0;
/* First check if we need to match the LBA */
if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
@@ -1560,8 +1556,6 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command for pde*/
reftag = scsi_prot_ref_tag(sc);
- if (reftag == LPFC_INVALID_REFTAG)
- goto out;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1723,8 +1717,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command */
blksize = scsi_prot_interval(sc);
reftag = scsi_prot_ref_tag(sc);
- if (reftag == LPFC_INVALID_REFTAG)
- goto out;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1953,8 +1945,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command for pde*/
reftag = scsi_prot_ref_tag(sc);
- if (reftag == LPFC_INVALID_REFTAG)
- goto out;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2154,8 +2144,6 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
/* extract some info from the scsi command */
blksize = scsi_prot_interval(sc);
reftag = scsi_prot_ref_tag(sc);
- if (reftag == LPFC_INVALID_REFTAG)
- goto out;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2746,8 +2734,6 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
src = (struct scsi_dif_tuple *)sg_virt(sgpe);
start_ref_tag = scsi_prot_ref_tag(cmd);
- if (start_ref_tag == LPFC_INVALID_REFTAG)
- goto out;
start_app_tag = src->app_tag;
len = sgpe->length;
while (src && protsegcnt) {
@@ -3493,11 +3479,11 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
scsi_cmnd->sc_data_direction);
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
- "9084 Cannot setup S/G List for HBA"
- "IO segs %d/%d SGL %d SCSI %d: %d %d\n",
+ "9084 Cannot setup S/G List for HBA "
+ "IO segs %d/%d SGL %d SCSI %d: %d %d %d\n",
lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
- prot_group_type, num_sge);
+ prot_group_type, num_sge, ret);
lpfc_cmd->seg_cnt = 0;
lpfc_cmd->prot_seg_cnt = 0;
--
2.38.0
