After converting variable-length arrays to flexible array members,
use the bounds-checking struct_size() helper when possible to avoid
open-coded arithmetic struct size calculations.
Signed-off-by: James Seo <james@xxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +--
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++------------
drivers/scsi/mpt3sas/mpt3sas_transport.c | 9 +++------
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 3 +--
4 files changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 53f5492579cb..2ae0185938f3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4876,8 +4876,7 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
if (!num_phys)
return;
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index c3c1f466fe01..d5426a520a77 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2431,8 +2431,7 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
}
raid_device->num_pds = num_pds;
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
+ sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
dfailprintk(ioc,
@@ -5966,8 +5965,7 @@ _scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc)
/*
* Read SASIOUnitPage0 to get each HBA Phy's data.
*/
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) +
- (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6145,8 +6143,7 @@ _scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc,
u64 attached_sas_addr;
u8 found = 0, port_count = 0, port_id;
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
- * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6579,8 +6576,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
(u64)ioc->sas_hba.sas_address));
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
- * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6731,8 +6727,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
ioc->sas_hba.num_phys = num_phys;
/* sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6754,8 +6749,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
}
/* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index e8a4750f6ec4..421ea511b664 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -1792,8 +1792,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
/* handle hba phys */
/* read sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -1833,8 +1832,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
}
/* read sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -1944,8 +1942,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
/* handle hba phys */
/* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
index cc07ba41f507..1d64e5056a8a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -141,8 +141,7 @@ mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
return;
}
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
+ sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
--
2.39.2
