[PATCH v2 12/15] arm64: dts: qcom: sdm845: Add interconnect paths to UFSHC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



UFS host controller requires interconnect path configuration for proper
working. So let's specify them for SDM845 SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e04a3cbb1017..2ea6eb44953e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2607,6 +2607,11 @@ ufs_mem_hc: ufshc@1d84000 {
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 
 			operating-points-v2 = <&ufs_opp_table>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 
 			ufs_opp_table: opp-table {
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux