Hi,
在 2023/07/10 15:32, kernel test robot 写道:
hi, Yu Kuai,
we noticed this commit is to fix "modprobe: FATAL: Module scsi_debug is in use."
issue, and we found it really does this work (below (1)).
we also found after this fix, the failed case on parent (004/005/007) could
pass now.
however, the blktests.scsi/002 start to fail after this change.
I thnik this should be fixed by following patch:
https://lore.kernel.org/lkml/20230706125253.GA12842@xxxxxx/T/#m8f46592ad2b6f3f56a242eaf9f335e0e46c8f86f
Sorry for the trouble
Kuai
a42fb5a75ccc37df fcaa174a9c995cf0af3967e5564
---------------- ---------------------------
fail:runs %reproduction fail:runs
| | |
6:6 -100% :6 stderr.modprobe:FATAL:Module_scsi_debug_is_in_use <-- (1)
:6 100% 6:6 blktests.scsi/002.fail
:6 100% 6:6 blktests.scsi/004.pass
:6 100% 6:6 blktests.scsi/005.pass
:6 100% 6:6 blktests.scsi/007.pass
below is the detail report FYI.
Hello,
kernel test robot noticed "blktests.scsi/002.fail" on:
commit: fcaa174a9c995cf0af3967e55644a1543ea07e36 ("scsi/sg: don't grab scsi host module reference")
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master
[test failed on linus/master 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5]
[test failed on linux-next/master 123212f53f3e394c1ae69a58c05dfdda56fec8c6]
in testcase: blktests
version: blktests-x86_64-154e652-1_20230620
with following parameters:
disk: 1HDD
test: scsi-group-00
compiler: gcc-12
test machine: 4 threads Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (Skylake) with 32G memory
(please refer to attached dmesg/kmsg for entire log/backtrace)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <oliver.sang@xxxxxxxxx>
| Closes: https://lore.kernel.org/oe-lkp/202307101556.ea548e4f-oliver.sang@xxxxxxxxx
2023-07-09 23:41:29 sed "s:^:scsi/:" /lkp/benchmarks/blktests/tests/scsi-group-00
2023-07-09 23:41:30 ./check scsi/001 scsi/002 scsi/004 scsi/005 scsi/006 scsi/007
scsi/001 => sdb1 (try triggering a kernel GPF with 0 byte SG reads)
scsi/001 => sdb1 (try triggering a kernel GPF with 0 byte SG reads) [passed]
runtime ... 10.158s
scsi/002 => sdb1 (perfom a SG_DXFER_FROM_DEV from the /dev/sg read-write interface)
scsi/002 => sdb1 (perfom a SG_DXFER_FROM_DEV from the /dev/sg read-write interface) [failed]
runtime ... 0.087s
--- tests/scsi/002.out 2023-06-20 16:51:09.000000000 +0000
+++ /lkp/benchmarks/blktests/results/sdb1/scsi/002.out.bad 2023-07-09 23:41:42.308862573 +0000
@@ -1,3 +1,3 @@
Running scsi/002
-PASS
+open: Is a directory
Test complete
scsi/004 (ensure repeated TASK SET FULL results in EIO on timing out command)
scsi/004 (ensure repeated TASK SET FULL results in EIO on timing out command) [passed]
runtime ... 2.826s
scsi/005 (test SCSI device blacklisting)
scsi/005 (test SCSI device blacklisting) [passed]
runtime ... 9.988s
scsi/006 => sdb1 (toggle SCSI cache type)
scsi/006 => sdb1 (toggle SCSI cache type) [passed]
runtime ... 0.144s
scsi/007 (Trigger the SCSI error handler)
scsi/007 (Trigger the SCSI error handler) [passed]
runtime ... 15.426s
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
sudo bin/lkp install job.yaml # job file is attached in this email
bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
sudo bin/lkp run generated-yaml-file
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
