https://bugzilla.kernel.org/show_bug.cgi?id=215880 --- Comment #49 from Paul Ausbeck (paula@xxxxxxxxxxxxxxxxxxx) --- My reflex memory says that when resuming Debian 11/5.10 the mouse cursor was live immediately after the LCD monitor came on. Current testing says that when resuming Debian 12/6.1 the mouse cursor is frozen until at least five seconds after the monitor comes on. In order to verify that my reflex memory was correct, I booted Debian 12 but with the 5.10 kernel. Sure enough, upon resume the mouse cursor is immediately alive once the LCD monitor comes on. I've attached the end portion of the Debian 12/5.10 resume dmesg log below. Note that the restarting of tasks and the PCI/GPU activity that happened at the end of resume for the Debian 12/6.1 combination happens before ATA bring up with the Debian 12/5.10 combination. This is starting to look like a regression to me. [ 45.516511] OOM killer enabled. [ 45.516512] Restarting tasks ... [ 45.516726] pci_bus 0000:03: Allocating resources [ 45.516743] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 45.516748] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 45.516756] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 45.516759] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 45.516762] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 45.516764] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 45.516768] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 45.516769] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 45.516771] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 45.516772] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 45.518520] done. [ 45.518693] video LNXVIDEO:00: Restoring backlight state [ 45.518696] PM: suspend exit [ 45.641461] br0: port 1(eth0) entered disabled state [ 45.734342] ata6: SATA link down (SStatus 0 SControl 300) [ 45.734372] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 45.734405] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 45.734435] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.735377] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.735382] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.735384] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.735433] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.735437] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.735440] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.735499] ata1.00: supports DRM functions and may not be fully accessible [ 45.736244] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.736249] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.736251] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.736531] ata2.00: configured for UDMA/133 [ 45.746293] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.746298] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.746301] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.767136] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.767141] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.767144] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.772405] ata5.00: configured for UDMA/100 [ 45.819126] ata1.00: NCQ Send/Recv Log not supported [ 45.820557] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 45.820571] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 45.820573] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 45.820687] ata1.00: supports DRM functions and may not be fully accessible [ 45.820786] ata1.00: NCQ Send/Recv Log not supported [ 45.821701] ata1.00: configured for UDMA/133 [ 45.947955] firewire_core 0000:03:01.0: rediscovered device fw0 [ 48.373868] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 48.373927] br0: port 1(eth0) entered blocking state [ 48.373930] br0: port 1(eth0) entered forwarding state [ 50.775921] ata3: link is slow to respond, please be patient (ready=0) [ 50.783922] ata4: link is slow to respond, please be patient (ready=0) [ 51.143938] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 51.262481] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 51.262485] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 51.262488] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 51.264139] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 51.264144] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 51.264147] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 51.264802] ata4.00: configured for UDMA/133 [ 55.403919] ata3: COMRESET failed (errno=-16) [ 56.799938] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 56.981696] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 56.981702] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 56.981705] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 57.008271] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 57.008277] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 57.008280] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 57.012179] ata3.00: configured for UDMA/133 -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
