https://bugzilla.kernel.org/show_bug.cgi?id=217599 Bagas Sanjaya (bagasdotme@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bagasdotme@xxxxxxxxx --- Comment #1 from Bagas Sanjaya (bagasdotme@xxxxxxxxx) --- (In reply to pheidologeton from comment #0) > The controller works fine for a few minutes. Then it hangs for a few tens of > seconds to a few minutes, then also works normally for a while. This bug is > present in the 6.4.0 kernel release (6.3.9 works without hanging) > The messages in dmesg are as follows > > [ 287.137901] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137909] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137912] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137914] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137916] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137919] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137921] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137924] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137926] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137928] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137930] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137933] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137934] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137937] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137939] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137941] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137943] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137945] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137947] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137949] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137951] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137952] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137954] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137956] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137958] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137960] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137962] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137964] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137966] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137967] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137969] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.137971] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 287.157697] aacraid: Host bus reset request. SCSI hang ? > [ 287.157706] aacraid 0000:02:00.0: outstanding cmd: midlevel-0 > [ 287.157708] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0 > [ 287.157709] aacraid 0000:02:00.0: outstanding cmd: error handler-0 > [ 287.157711] aacraid 0000:02:00.0: outstanding cmd: firmware-32 > [ 287.157712] aacraid 0000:02:00.0: outstanding cmd: kernel-0 > [ 287.167040] aacraid 0000:02:00.0: Controller reset type is 3 > [ 287.167042] aacraid 0000:02:00.0: Issuing IOP reset > [ 321.029712] aacraid 0000:02:00.0: IOP reset succeeded > [ 321.066201] numacb=512 ignored > [ 321.066843] aacraid: Comm Interface type2 enabled > [ 344.845370] aacraid 0000:02:00.0: Scheduling bus rescan > [ 358.294342] sd 10:0:0:0: [sda] Very big device. Trying to use READ > CAPACITY(16). > [ 442.109147] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109155] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109158] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109160] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109162] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109164] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109166] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109168] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109170] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109172] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109174] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109176] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109178] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109179] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109181] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109183] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109185] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109187] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109189] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109191] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109193] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109194] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109196] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109198] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109200] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109201] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109203] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109205] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109207] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109208] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.109210] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.137144] aacraid: Host adapter abort request. > aacraid: Outstanding commands on (10,0,0,0): > [ 442.154292] aacraid: Host bus reset request. SCSI hang ? > [ 442.154302] aacraid 0000:02:00.0: outstanding cmd: midlevel-0 > [ 442.154305] aacraid 0000:02:00.0: outstanding cmd: lowlevel-0 > [ 442.154307] aacraid 0000:02:00.0: outstanding cmd: error handler-0 > [ 442.154308] aacraid 0000:02:00.0: outstanding cmd: firmware-32 > [ 442.154310] aacraid 0000:02:00.0: outstanding cmd: kernel-0 > [ 442.171131] aacraid 0000:02:00.0: Controller reset type is 3 > [ 442.171133] aacraid 0000:02:00.0: Issuing IOP reset > [ 476.040983] aacraid 0000:02:00.0: IOP reset succeeded > [ 476.078055] numacb=512 ignored > [ 476.078606] aacraid: Comm Interface type2 enabled > [ 494.747632] aacraid 0000:02:00.0: Scheduling bus rescan > [ 507.896453] sd 10:0:0:0: [sda] Very big device. Trying to use READ > CAPACITY(16). Can you do bisection between v6.3 and v6.4 please? -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
