From: Michael Kelley <mikelley@xxxxxxxxxxxxx> [ Upstream commit 31d16e712bdcaee769de4780f72ff8d6cd3f0589 ] Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this: hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001 The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks. Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged. Signed-off-by: Michael Kelley <mikelley@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1686343101-18930-1-git-send-email-mikelley@xxxxxxxxxxxxx Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/storvsc_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index c9b1500c2ab87..98db7bcbe2af1 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1626,6 +1626,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice) { blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ)); + /* storvsc devices don't support MAINTENANCE_IN SCSI cmd */ + sdevice->no_report_opcodes = 1; sdevice->no_write_same = 1; /* -- 2.39.2
